Nice video but wrong method. All the frozen part got water on them after the assembling the engine you will have a water inside your engine due to the frost melting down slowly from these parts. Regardless how long it takes you to close the engine but water will stay inside. You can clearly hear the dry/rusting noise coming from the engine after starting the engine, it's just remained water inside the parts.
@@TRIVANDRUMBASEDKERALITE unfortunately after closing the engine there will be no outlet to evaporation also engine will produce combustion so it will burnout but before that process things can be damaged due to higher level of water mixing with the engine oil. Such as damaging the bearings and head cylinder sleeve/pocket? 🤔 Rubber seals making hot and then cold can cracked and loses their elasticity?
No hard feelings brv, just trying to understand the method you use for this project of yours as never came across such before. After all rest of the job really well done no doubt 👍 👏
@@nazarbutt1720 actually i had fitted the crank seals after the bearing and hot aluminium flange become normal temp. that is enough time for the evoporation. hot and cold method is a universal engineering method for interfence fittings. you can google it. thanks
Voice over cheyyathe oru attraction illaa,
Already ulla video ayond aanu
Macha...video pwolichu....next video pattacha voice itolo...katta waiting aaa😍💥
xelent work sir
Beautiful working without sound
Good wrk bro👍
Ippozha oru manasamadhanam ayathu
I have 135 but I love rx100 beatsound
engine full set ayile..🔥
Aay. 😁
Mera do bike hain app thik kar sakta hain kiya
🔥🔥🔥🔥
Hai broii
👍👍
❤️❤️❤️
Hai
Haii
Bro
Rxinokke power koottumbol crank balance cheyyunnath enganeyaan????
Angane balance cheythillengil engine life kurayumo??
Balance ing software kal und. Extra hole ittum. Aluminum piece ittum avar balance cheyyarund.
👍👍👍
Hai
💥
💖💖💖💖💖
Hai
Engine overhaul cheytha udan chamber vachu odichal scene indakumo
Illa. But calculated anel powlokkum
Bro it's possible to get rx100 sound in rx135?
Voice yavide
Gasket വെക്കുമ്പോൾ ഉപയോഗിക്കുന്ന Gum ഏതാണ്
Annan paranjapolaa 6k rx100 eduthu panituu. 50k ayeeee.
😁 40 rupakk paninjo
Hii aashane
Chetta which is best piston. top pro or goetx piston say any one
Top pro original vanganam.
Npp is also good
How much milage it gives after engine rebuild....???
30-35.
Exhaust rise 3 mm
Bro ഇത് 4speed എഞ്ചിൻ അല്ലെ
Athe
Plz make hindi version
Ippo eth cylinder aahn ittirikkunne??
Diamond
@@TRIVANDRUMBASEDKERALITE ennu paranjal endha bro??😁
Voice over cheyii
Nice video but wrong method. All the frozen part got water on them after the assembling the engine you will have a water inside your engine due to the frost melting down slowly from these parts. Regardless how long it takes you to close the engine but water will stay inside. You can clearly hear the dry/rusting noise coming from the engine after starting the engine, it's just remained water inside the parts.
it wil evaporate when contact with hot surface i had heated.
thank you..
@@TRIVANDRUMBASEDKERALITE
unfortunately after closing the engine there will be no outlet to evaporation also engine will produce combustion so it will burnout but before that process things can be damaged due to higher level of water mixing with the engine oil. Such as damaging the bearings and head cylinder sleeve/pocket? 🤔
Rubber seals making hot and then cold can cracked and loses their elasticity?
No hard feelings brv, just trying to understand the method you use for this project of yours as never came across such before.
After all rest of the job really well done no doubt 👍 👏
@@nazarbutt1720 actually i had fitted the crank seals after the bearing and hot aluminium flange become normal temp.
that is enough time for the evoporation.
hot and cold method is a universal engineering method for interfence fittings.
you can google it. thanks
Rate
Pari bro
Voice illathe nth ith🥱
Pinnalla!!!!!!
😎
voice over illathe kaanan thonnunnilla
Will do.
voice illalo
Next video
@@TRIVANDRUMBASEDKERALITE Ok
bro voice edathatentu 🤔🤔
Already oru assembly video und athond aanu
kelkkan oru sugamilla bro .
Pls reply
ബ്രോ എന്തിനാ കവർ ഹീറ്റ് ആക്കുന്നേ.
Bearing fit cheyyan vendi
@@TRIVANDRUMBASEDKERALITE അപ്പോൾ അവിടത്തെ പെയിൻ്റ് പോകില്ലേ.
@@rajesh.R engine case matram aanu heat akunnath.
Hyy👋
Hai
Bro tvmil avida ith?
Not a workshop
Number tharumo
Bro in rx clutch side crank oil seal, which side should the oil seal number be facing or Will it work in any direction?
Derailed video und engine assembly.
Hta veliyil kananam