National Gas Engine 40 HP - start up , operation + details
Вставка
- Опубліковано 25 лип 2017
- ➥ Subscribe for more: / davide458italia
➥ Facebook: / davide458italia
➥ Instagram: / davide458italia
➥ Blog: www.davide458italia.blogspot.it.
➥ Support me: www.paypal.me/DavideMontanari90
Full HD video 1080p. Description:
I filmed this 1910 National Gas Engine S45 at the 20 Festa Aratura dei testa Calda Cogruzzo in Castelnovo di Sotto. In the video you can see the start up of the engine, then the machine in action at low and high revs, running to make some show. Also some details and a walkaround.
Manifacturer: National Gas Engine, in Wellington Works, Ashton-under-Lyne, Manchester, England.
Stationary motor fueled by poor gas, obtained from combustion of wood. It was placed in a fixed position and used through flat belt to drive power generators, mills, pumps, workshops, sawmills and machine tools.
Start up with compressed air, displacement 76.5 liter, 40 hp @ 110 rpm, water-cooled, weight 15 tons.
Cylinder bore: 450 mm
Cylinder stroke: 600 mm
Date of production: 1890-1900
Imported in Italy from France by Marenghi brothers and restored.
Ho filmato questo National Gas Engine S45 del 1910 alla 20° Festa Aratura dei testa Calda Cogruzzo Castelnovo di Sotto RE 2017. Nel video potete vedere l'accensione del motore, poi la macchina in azione ad alti e bassi giri. Anche alcuni dettagli.
Fabbricante: National Gas Engine, a Wellington Works, Ashton-under-Lyne, Manchester, England.
Motore stazionario fisso alimentato a gas povero, ottenuto dalla combustione di legname. Veniva posizionato in luogo fisso ed utilizzato tramite cinghia piana per azionare generatori, mulini, pompe, officine, segherie e macchine utensili.
Accensione ad aria compressa, cilindrata 76500 cc, 40 cv a 110 giri/min, raffreddato ad acqua, peso 15 tonnellate.
Alesaggio 450 mm
Corsa 600 mm
Data di produzione 1890 - 1900
Importato in Italia dalla Francia grazie ai fratelli Marenghi e restaurato - Авто та транспорт
The coolest thing about this engine, aside from how it looks and sounds, is the fact that it would send an OSHA inspector fleeing in terror. That thing demands respect, as there are about a dozen ways it could crush you or tear you to bits. It was clearly designed at a time when there were no allowances made for idiots.
And now we’ve run out of money paying those allowances ✌️
No allowances made for idiots means the designer is an idiot.
Just look how close his hands get to a lot of the machinery in motion. I imagine broken fingers being the most common but I would hate to imagine if anyone slipped and fell into or on top of any part of it.
No joke. This is a machine that'll rip your arm off for fun, and then beat you to death with it out of spite.
Note, though, that they did seem to have fewer idiots in the wild then . . . 😉
I just love that intake sound as it gulps 76.5 litres of air!
JJ, BABUG
ผมชอบกลจักรแก๊สโซลีน เครื่องนี้มากที่สุดครับ กลไกการทำงาน ไม่ซับซ้อน รูปลักษณ์กระทัดรัด...พลังงาน เต็มประสิทธิภาพ..เหมือนกลจักรไอน้ำโบราณ..เจ๋ง.ครับ..
Он безз пара и не сможет работать
The intake stroke sounds like a breathing beast at first and it looks menacing while running, but I love it!
This is the coolest sounding engine I have ever heard! It sounds alive!!
It is scary af
@@josenildoferreiraassuncao8963 how is it scary bruh
Inhaling and exhaling!!!!
@@turbocavalli maybe because it sounds like breathing
It is alive and it is breathing
These things sound like they are ALIVE and breathing!!
Poetry from a lover of music. My thanks!
Có su that ve may bay là tùy thuộc Hugh grant là giỏi thôi mà 😂😋😫
@@grandlotus1 hy vọng sẽ có cần sa high school host thì đang còn ở lại điếc tai rồi
@@huynhha8483
Greetings, friend. You know more languages than me. God Bless.
@@huynhha8483
Dang, I bet that's a great comment. You've got a language advantage on me, my friend.
That sound is unbelievable. It's as though the machine is alive!
Things got better beats then some of the new music
They're probably already using it and calling it their own.
than*
Still more power than a honda
Yeah
The heavy compression/ exhaust as she wakes and then purrs...I am an engineer (you can tell can't you?)
Звук шикарный! особенно на малых оборотах. Как у живого создания! (The sound is gorgeous! especially at low speeds.)
O
Can we take a min to congratulate this older gentleman on his calves? Excellent work sir.
But what's he got on his feet???
@@GLF426 It´s called sandals.
142 fucking WEIRDOS.
IKR? And those forearms. He has it going on for an old guy.
These wonderful old engines are like a group of musicians all playing in perfect time.
Love the sound of the intake stroke.
Ragazzi guardate i nostri nonni cosa costruivano con le mani. Senza pc
As someone who has walked around a lot of tractor and stationary shows, it was nice to see your National running hard. It sounds pretty fierce at speed. I like to hear one with the governor opened up a little. Id really like to hear that engine with a load on it.
They could've used it to make Darth Vader's breath effect.
@@DaveC2729 lol😅
@@user-ut8fd2ie1n Hey, I'm not wrong.
Love these old bits of kit still running!. Admire the people with the skills, determination and 'nous' to keep them running!. Nice one!. Maddog Melbourne.
I really love the rhythm of these old engines
HP : 40
Torque : *YES*
777ppae23p
1
approx 14'000 lb-in
2555 Nm
كم@@riccardo3212 Hello my friend, how many revolutions per minute does this engine rotate?
Oh great engine, powerful and smoth sound with rotation they are swaying together.
Simply fantastic! Thanks a lot for saving restoring showing taping editing uploading and sharing.
4:00 One thing I like the most about these engines is the sound. Bomb ass beat I must say.
Awesome to see old iron taken well care of and in operation - thanks for posting..
40 HP
UNLIMITED TORQUE
Pulkz 1900ish ft-lb
@@andrewfritz5123 am I correct to say that 44bhp KTM 390 engine could theoretically produce more torque than this with the help of gearing although having a fraction of its displacement?
Jaspreet Singh theoretically yes but that’s not taking into consideration drivetrain losses such as bearings and fluids, if you did build a gear box for it to create that amount of torque it may not be able to start it from a dead stop and either way it would be insanely slow converting like 20ft-lb (just a guess) @ 6000rpm to 1900ft-b it would need a gear ratio of roughly 1150:1 and spin at like 2 rpm
@@andrewfritz5123 Correct me if I am wrong.
KTM 390's engine puts out 24lb ft to the wheel at 7200rpm. So, if I built a gearbox to reduce the rpms such that the output is 1900lb ft then the gear ratio would only need to be 79:1. At that gear ratio if the input shaft rotates at 7200rpm then the output would be 91rpm.
(torque of A:torque of B=teeth of A:teeth of B;
where, A and B are two gears.
I wonder how you calculated 1150:1 gear ratio)
Note that this is including the drivetrain losses in the bike and excluding the losses in the imaginary gearbox that I've made.
The engine in this video goes to around 120rpm(using my eyes as tachometer) and that such engines generally produce peak torque at the lower end of their rev range, so I think it should be able to beat this engine in terms of torque.
I may be wrong, but my conception is that since HP is the unit of work done, therefore two engines with the same HP should be able to do the same amount of work which directly means that if their respective output shaft rpms are matched with the help of a suitable gearbox then then the torque should also be same (neglecting transmission losses).
Feel free to correct me.
Jaspreet Singh yah, that’s right I’m pretty sure. I fucked up somewhere in my math... well besides for fact of the engine would be sitting at 7grand the entire time and cook itself, I think you’d have 1900 ft-lb of torque.
Sinh hello sharing this video is great, my friend, thank you for sharing this video ♥️👍🔔🔔
Lovely engine I was born in 1908 I am 115 so I remember that engine brings back memories for me
The moment when the engine takes is pleasant. I am excited. Thank you from Japan.
I am horny as well.
@@officialJoCa what
Love that whip-crack-breath sound OMG
Whoever built that were marvelous engineers. First building that huge machine and such a machine that still can run.
holy cow thats a big engine. Thanks for sharing. Such amazing history.
My grandma and grandpa used to have two of these at their farm just sitting outside. They were massive - never knew what they were at the time though
I'd love to see the foundry back when, making these castings.
As this engine began to run, the sound had a great tempo! Kinda reminded me of the movie Chitty Chitty Bang Bang
Old technology is always the best
Don't use your phone or open youtube dude 😆
Unbelievable absolute in mint condition. This guy is awesome 😁😁
4:08 , I love the sound😂😂 nice beat 😂😂
🌷✋😍😘😙
Sex rhythm ...women aaah aaah aaah
Типа бит бокс
@@chandandehariya4015 what
@@conradsmith9332 during sex time women shout aah aah aah
God bless protect you from any setrangers rude savagery,,, you made things wonderful good useful beautiful make human life happy ❤❤❤❤❤❤❤
When this thing breaths it sounds interesting and more alive then anything I’ve seen without movie effects
There's always a noisy Fairbanks two stroke in the back ground somewhere :-) Lovely old National sounds fantastic
They are in italy, the sound went from a landini l25 or l35
Beautiful sound. Magnificent engine
I love the sound those engines make.
Tem que ser um gênio para por para operar da máquina incrível, uma obra de arte da engenharia.
3:06 that first "breath" almost sounds creepy. Thanks for sharing.
almost not !!!!! IT SOUNDS VERY PROFOUNDLY CREEPY !!!!!!!!
@@eloyex welcome to engineering
Hey Honey!, come here!,
I just found out what I want for Christmas!
Beautiful engine, and thanks for sharing!!
Smiling all the time thank you my friend
O som deste motor funcionando paresse ser o som de uma orquestra 👏🏻👏🏻👏🏻👏🏻
The National gas and oil engine co of Ashton under Lyne England , built to last for ever.
What a stately beast. Impressive. Proud. Clean. Thanx.
Every engine has its own music ❤️❤️
Make a rap
That engine sounds like engine.
That's an art.
Все гениальное просто............................
REMEMBERING ENGINES LIKE THESE PUMPING WELLS IN WEST VIRGINIA . LAYING IN BED, THE WHIPORWILLS CALLING THE OLD ENGINE FIRING WITH A LOUD BANG, OH THOSE WERE THE DAYS !
Best industrial DJ ever))
Beautiful
Wow... !!! My best friend, You Great Good... !!! I wish you every day of your development. Best Relaxing +thumb up3!
When the engine starts the sound is like a percussion, super cool. #thumbsup
Meu Deus q coisa mais linda este funcionamento 👍👍👍👍👍👍
Você tem razão, muito lindo ver funcionando, agora eu fiquei impressionado a forma que o motor ligado, muito simples. Admirável!
Wow what a amazing sound like music 😍😍😍
I just Love it I am a retired Diesel and Gas Mechanic gotta Love it
It's got the same beat as Queens Song, We Will Rock You. COOL
4:05 We will we will rock you!
I really love this video. Thank you for the post.
Gg
Excellent video, thank you. Clear and detailed, and the sound is wonderful!
Great safety gear - shorts and sandals!
Spettacolare la meccanica antica
GOD... ITS A DRAGON.... Breathing
each stroke of cycle is audible, awesome !
4:32 The dog loves it.
3:30 getting my brain to start working on a Monday morning 😫
Very good
Beautiful. Thanks for sharing
One of my favorite videos. Like the manual control of the compression release at 3:54. Thank you.
Breathing dragon beautiful
Piękny! Brawo
What a wonderful sound!
Che belli i motori di questo tipo/periodo.
Hanno un che di magico.
4:06 - "we will rock you". anyone ?
Sounds beautiful, like pavarotti
This is not just a machine,it also makes some dope ass house beat
Una bella sinfonia di immagini e suoni
These old engines were built to last!
Today's engines are built to die fast!
You just aren't looking for the right engine
You're simply not buying the right engines.
You art thou buying thy wrongeth engines.
They die fast because they make 3 times more horse power and are 10 times smaller and 100 times more complicated.
@@sylvesterskyes9558 You didn't add high RPM part!
Muito bom, estou estudando mecânica e esses motores me inspiram. 🤘😎♥️
Qual o uso dele?
Love that sound !!
I dont know how but There is something otherworldly about it like The moment when it takes this first "breath" it sounds like A monster and Then it slowly come back to life
I'm enjoying watching your good video.
I support you in Korea.
Is this you Kim? Now dont try to put this On your rocket.
@@joachimsingh2929 p00 of
@@joachimsingh2929 o ww the ww
Hmmm
Thank you for sharing. I was so scared that my man(black) in the lower left was going to interfere(at 4:34).
Wonderful engine and sound ! 👍🏻
Sehr sehr geil, die Zündungen klingen wie Schüsse, der offene Verdampfer und die Ölkolbenpumpe 👌👍
40hp, and about 1,000,000 lb/ft of torque!
Who needs two overly expensive specialized rigs to pull the space shuttle when you have this??
40hp at 110rpm is about 1900 ft-lbs. Pretty impressive.
Just saw this best wow. Very nice. Wondering how much fuel this thing burns under a average load?. Nice vid
wow, that calls old is gold. thanks for your video. I ever saw
एक
ua-cam.com/video/ws5QfwYQrzo/v-deo.html
Hccvdddxddl
Old IS call!
one of the greatest musical machines for 300 years and going
These old engines are so cool.
Good rythm, i could make a song with this
Faan 1519 Good.
Faan 1519 right
روت
😜
4:16n
Me: wow what a good music
1 second later...
Me:Start dancing
Very very big machines
hypnotic machine .... look and sound !!!!
Good
This engine's breathing freaks me out.
Cool piece of history.
تعليق الذهبي والله انها ارقى ماكنة فى العالم عاشت ايطاليا الوطنية .
For the old cars 😭😭😭🙏
Do you hear that Morse Fairbanks 2stroke in the background? I really dig this ish!!