This is due to a charging fuse or transistor on the motherboard being broken. It is easier to just replace the motherboard with a new one otherwise you will have to buy a new transistor or fuse and solder it onto the existing one and unless you have the proper equipment and know-how, it's much harder to do and harder to get it right. Replacing the motherboard is no easy feat though. The designed the motherboard to be at the very bottom of the robot so you would have to disassemble everything and I mean EVERYTHING, remove 100+ screws in order to get to the motherboard. By the time when you've done that, you would be an expert in robot vacuum repair.
I have a roborock q5 and when I give it the order to go charge the charger light doesn't stop flashing and the person who helps me doesn't pick up the charge
Mine it's still charging. My problem is like this: Occasionally, that means daily or even twice three times a day it just wakes up and goes away from the dock like 50 cm in front of it. When I click on the button to go back to it, it says: error 13 blah blah. I click it again and it goes back and it charges.
In my S50, fixed by changing the main capacitor in the charger. 10 minute job.
Thanks my problem solved there was very little black sticky thing on charger😂
This is due to a charging fuse or transistor on the motherboard being broken. It is easier to just replace the motherboard with a new one otherwise you will have to buy a new transistor or fuse and solder it onto the existing one and unless you have the proper equipment and know-how, it's much harder to do and harder to get it right. Replacing the motherboard is no easy feat though. The designed the motherboard to be at the very bottom of the robot so you would have to disassemble everything and I mean EVERYTHING, remove 100+ screws in order to get to the motherboard. By the time when you've done that, you would be an expert in robot vacuum repair.
Добрый день Дмитрий. Подобная проблема и у меня. гарантии уже нет. Можете конкретнее описать починку? какие детали менялись?
Здравствуйте, Вам удалось решить проблему?
I have a roborock q5 and when I give it the order to go charge the charger light doesn't stop flashing and the person who helps me doesn't pick up the charge
Thanks
И у меня такая же проблема после года эксплуатации. В Доминикане нет мастеров. Значит нужно покупать новую зарядную станцию?
Здравствуйте, Вам удалось решить проблему?
@@maksboldashev9013 ,я заменила аккумулятор и проблема не решилась. Значит док или мозги. Буду покупать новый, дешевле будет :)
Same here. Did you resolve?
Problem was at charging station. One of transistors had burned out. Replaced by guarantee.
Thanks for the info. Hope the shop from Aliexpress cares about it...
I have the same problem. I will write to the aliexpress seller but I doubt will hear from them again... 😕
Same error tried another charging station but still not charging👎🏼
Mine it's still charging. My problem is like this: Occasionally, that means daily or even twice three times a day it just wakes up and goes away from the dock like 50 cm in front of it. When I click on the button to go back to it, it says: error 13 blah blah. I click it again and it goes back and it charges.
Anyone here where this did not solve the problem for them, this video points to some other solutions: ua-cam.com/video/CGj-sO4wKOU/v-deo.html
Сч