BYU Rocketry - OpenRocket Tutorial
Вставка
- Опубліковано 17 лют 2019
- Former president and founder, Ryan Garrison, provides a basic OpenRocket tutorial. This tutorial is not meant to be a complete guide to using OpenRocket, but a helpful resource to get started.
0:00 How to install
2:00 Overview of GUI
3:20 Change units used
3:58 Build basic rocket
3:58 Nose cone
8:24 Body tube
9:18 Inner tube
12:37 Fins
18:08 Motors
22:22 Stability / GP & CG
24:57 Parachute
25:39 Shock Chord
26:54 Simulations
30:11 Ending statement
34:11 2019 Competition Rocket
Thank you so much for making this video. I've learned a lot of stuff in one single video.
Thank you so much for making the video. I had been at BYU, I used to live right behind the Provo Library, and never imagined BYU had a rocket club/organization. I didn't finish my major back then, but things happen for a reason; I am now studying aerospace engineering in California.
Great tutorial; I followed while designing the same thing with slight differences. Great Simulation results on G & H motors.
Great video, at the end you say launching it after all the simulations is "probably" the best part, i agree good sir!!!
Thank you for show all details.
Türkler youtube yorumlarını basmış dostum ne işin var burada :D
DAHA ÖNCE BU UYGULAMAYI KULLANDIN MI BİR DE CEVAPLARSAN SEVİNİRİM
@@justthetwous314 asbdkoifcgasdyfas
Nice tutorial! Great for those looking for a well-explained introduction! Thanks!!
Wise words indeed: "You really do not want to disassemble your rocket mid-flight at a couple hundred miles per hour...."
Thanks for the tutorial! A massive help for an upcoming project 👍🏼 🚀
how to convert it in stl file for printing
Hello Mr. Ryan Garrison, I would like to know if we can use Openrocket for high altitude rocket simulation like launch vehicle application? also while modeling the rocket can we add our own rocket configuration or rocket (where all rocket parameters can be changed like dimensions, thrust, burn time etc.) to model exactly orbital launch event with design stages? Would love to have your feedback. Thank you.
thank u very much that was very useful
When we have the airbrake system, how to simulate the rocket for reaching accurate apogee using this simulation software?
Awesome video, if I were to build a rocket large enough to make it to space, do I need faa approval prior to launch? Also same question in regards to FAA approval for a rocket flying higher than 400ft Agl?
Is there a book you can recommend to design a solid propellant rocket engine, along with formulas and explanations?
Is BYU rocketry taking new students (only learned the basics of rocketry software like this) onto the team/ have a smaller apprentenship/introduction rocket team we may join to further explore rocketry?
Hello, I would like to get closer to this world, I come from Italy and here it is a hobby that very few people do.
I have been doing 3d printing for several years now, I would like to be able to make something to send up into the sky
Thank you very much for the tutorials
Hello. No Launch lug? Or doesn't matter? is it possible to add two launch lugs in a row? or better one at the lower end of the rocket? Grüße, Ben.
Thank you very much sir
Helpful
for some reason everytime i run open rocket it opens fine but when i click on some parts for example the dropdown menu to select the views in the area where it desplays your rocket, it starts to start acting weird and it starts putting weird screens, kinda like of like the old windows XP error message dupicating thing, please help because this glitch wont stop and it messes me up when makeing a rocket
I'm happy to follow your video, but I have a question and I hope for the answer: how to define the center of thrust of the rocket, before it slips into the fuselage of the mini rocket ??? please answer
Good tutorial, thx.
Grate video!
Thanks a lot
Very nice tutorial.
QUESTION - I wondered how to add Aerotech RMS Motor Hardware (the Casing for the RMS Motors)? Is there a standard database of these casings, or do I need to start from scratch and add an inner tube?
Nope. The RMS reloads luckily already have casings in the program.
Thanks a bunch
Question - have you ever inputted an aluminum fin can into Open Rocket? If so, how did you structure it?
Jack Caynon Assuming the fin can slides over your body tube, you can create a new body tube of the correct internal diameter, external diameter, and length to represent the “can”. Then use the position offset function to position it over your actual body tube. Finally, add the fins to this new “can” tube instead of your body tube.
BYU Rocketry Great answer! Thanks!
Question for you. I'm using clear acrylic fins so they will be sort of invisible since the real rocket I’m modeling after doesn't have fins... Do you know how in the appearance tab of the fins to assign no color, so they show up as just a dotted line or something similar?
@Charles Holliday At 8.15 min there is an option in the menu called component line style. Thats probably it
well if you add fins that arent visible in the simulation it will be more stable then the real life version if you dont add fins so just build how it is going to be in real life and simulate it
Thank u so muchhhhhh man
Just check out your channela and subscribed
you explain very well sir.
sir can i get cad file of rocket ? can you help
Can I ask a question? Is there a rocket type that its top filled with black powder ? or u're planning to add black powder apart from the rocket motor
This rocket is designed to use the ejection charge in the motor like you described. It can be disabled, but he keeps it at 9 seconds after burn when he is talking about motors around 20:00.
Can it be used for supersonic, Mach-2, Mach-3, aluminum?
No. This program is only for 0.8 mach and little velocities
epic background
hi. I'm facing an execution issue regarding open rocket software. I have the latest java software. However whenever i download openrocket-15.03 from their website. It downloads the file in winrar format in my downloads section.
To try fix this issue i tried using the notepad method but still no use. How can i solve this issue?
You can download it from here and install the app. That worked for me.
Link: www.dropbox.com/s/dfpo0pzztgsscqf/OpenRocket-15.03-installer.exe?dl=0
@@burakciftcioglu2616 you sir....are a god. Thannkkkk you
Can we use this file to create stl file for 3d printing
how many costed these meterials? PLEASE IT IS VERY IMPORTANT FOR ME
it would be there at rocketry website
This app is free but ı don't know other things
Edit: Aa Türkmüşsün :D
how do i download it from?
may i know how learning Open Rocket will help me i am a 7th Grader
i think you have a company related to rocketry (BYU Rocketry). is it true ?
how do we launch the rocket my son wants to see it
Can we make stl file from this
Which software does SpaceX use?
MS Paint3D
sir plz give me ''open rocket link" and ''java link'' for windows 11..
I could not download ..
Space cannons..
12:20
very helpful thank you