Honda Foreman TRX 450 Leaking Gas: How to Fix it!

Поділитися
Вставка
  • Опубліковано 17 жов 2024
  • This Honda Foreman came in with a fuel leak and would not start! Full walkthrough on how to replace the carburetor and how to make sure you buy the correct one! it’s easier than you think! Subscribe for more content and how to videos!
    🌎WE SHIP PARTS WORLDWIDE 🌎
    Get Merch & Parts Request:
    shopleftys.com
    Find us on Facebook and Instagram
    Lefty's Snowmobile & ATV Salvage
    #honda foreman
    #gas leak
    #repair

КОМЕНТАРІ • 18

  • @carlwarga385
    @carlwarga385 Рік тому

    Hi , I have the same problem with may 450S it that an Original new carb or after market one as I’m look for one In UK

  • @ericpigg2689
    @ericpigg2689 Місяць тому

    That's the ideal customer right there. Lets you keep the $500 Honda carb that needs a $25 rebuild kit and puts on the $40 Amazon carb!

  • @guyseamster7573
    @guyseamster7573 Рік тому +1

    what is the black hose that hangs from the bottom? doesn't connect to anything? bleeder hose? Mine just went missing and gas leaking out the nipple on the bottom. Can't seem figure out what used to be there.

    • @leftyssnowmobileatvsalvage2344
      @leftyssnowmobileatvsalvage2344  Рік тому

      Ya that should be the drain for the fuel bowl. The hose doesn’t really matter as it’s just to direct the fuel down to the ground when you open the drain screw. I would make sure the drain screw is tight.

    • @guyseamster7573
      @guyseamster7573 Рік тому

      @@leftyssnowmobileatvsalvage2344 mmm guess i need figure out which one the drain screw is.... it was pouring out the nipple at the bottom but since seems to be coming out from everywhere. not sure if fuel filter is backed up or what happened... i look for the drain screw tomorrow! ty

    • @robertmacbride1994
      @robertmacbride1994 Рік тому

      ​@@guyseamster7573by by by😢😅 6:52

  • @maureecerose4077
    @maureecerose4077 Рік тому

    Where is the pilot screw located at on Honda foreman 400

  • @algarcia157
    @algarcia157 2 роки тому

    Great video! If you were just going to replace that primer pump where it was leaking….is it as
    simple as taking those two screws off and throwing a new primer pump assembly on there? Or do you have to pull out the carb to do that? Thanks!

    • @leftyssnowmobileatvsalvage2344
      @leftyssnowmobileatvsalvage2344  2 роки тому

      Thanks Al! Yes the primer can just be replaced without even removing the carb. In this particular situation the customer had someone else do some work inside the carburetor that he didn’t trust, and came to us wanting to just replace the entire thing.

  • @shmuelkokh
    @shmuelkokh 3 місяці тому

    Does this replacement carb still working good after almost two years?

  • @Day12My
    @Day12My Рік тому

    How did the cheap carb do..we didn’t get to hear much running during and after adjustments

  • @prcaroo1
    @prcaroo1 2 місяці тому

    Leave the inlet on the air box when pulling off the air box use it as leverage to get box of carb rubber 😮

  • @smity7096
    @smity7096 Рік тому +1

    Yeah and as soon as you shut it off. Carb was leaking again..right? Been there.

  • @beyondthegrave4663
    @beyondthegrave4663 Рік тому +2

    So basically you have to buy a whole new carb to fix the leak

    • @leftyssnowmobileatvsalvage2344
      @leftyssnowmobileatvsalvage2344  Рік тому

      You can purchase just the plunger kit and reseal just that, but in this case the customer opted for a brand new carb.

  • @prcaroo1
    @prcaroo1 2 місяці тому

    Put the coke plunger on sideways