Turning a Free Pallet into a $500 Chessboard

Поділитися
Вставка
  • Опубліковано 3 лис 2024

КОМЕНТАРІ • 424

  • @malvoliosf
    @malvoliosf Місяць тому +614

    A minor tip: instead of chopping the wood into 64 squares and ebonizing 32 of them, rip it into 8 strips, ebonize 4 of them, and glue them in an alternating pattern. Now you have a striped board. Cross-cut the board into 8 strips (each strip consisting of alternating black and white blocks), invert half the strips, and glue them all back together into a chess-board pattern. Much less fiddly. (Hat-tip to my luthier uncle who told it to me after I did the exact thing you did in 1975.)
    A major tip: now that you have all this knowledge (and all these CNC patterns), make TWO more, at one time. Making two will only take about (SWAG) 40% more time than making one, and you will be much faster now that you know how to do it. Sell each board for $700.
    Maybe it would help if you soaked the wood in the tannin and the ebonizing solution, make it less likely to sand off. Dunno, but worth a try - NOT on the chessboard, on a sample!

    • @therutenshi
      @therutenshi Місяць тому +15

      such a great tips!

    • @nathan1sixteen
      @nathan1sixteen Місяць тому +6

      I was thinking that last tip while watching.

    • @CeeJayThe13th
      @CeeJayThe13th Місяць тому +10

      I'm pretty sure the cutting board style technique you mentioned is how I've seen most of them built online. That's probably the way to do it the most efficiently!

    • @ESkog
      @ESkog Місяць тому +4

      $700 is outrageous for a chess board

    • @malvoliosf
      @malvoliosf Місяць тому +6

      @@ESkog Anything goes for its market-clearing price.

  • @Sir_Leelord
    @Sir_Leelord Місяць тому +187

    As a chess player, the black square on the right of the set up board at 16:50 drove my OCD mad, lol, (it's supposed to be white on the far right every time) but amazing craftsmanship and piece overall.

    • @azzaisme
      @azzaisme Місяць тому +8

      Can't you just turn the board 90 degrees

    • @LoreTunderin
      @LoreTunderin Місяць тому +28

      @@azzaisme yes, it's just annoying that the 'beauty shots' have the board setup wrong.

    • @EarlCo
      @EarlCo Місяць тому +3

      I have a custom handmade wooden chess board as well that I got for my birthday and it also has to be turned 90° to play. Fortunately, it's square, so I just consider that the drawers are on the left and right sides of each player rather than in front of them.

    • @ThePastaManCan
      @ThePastaManCan 28 днів тому +2

      @@azzaisme he set the draws... but okay.

  • @jimmerseiber
    @jimmerseiber Місяць тому +32

    This sold for this price because it's you, a youtuber with a following. Hands down.

  • @TheDivergentDrummer
    @TheDivergentDrummer Місяць тому +34

    Ok, so here is a tip for you. When you get a pallet to disassemble, BEFORE you cut it up, raise it up and SMASH it down on 2 opposing corners. all 4 if you [really don't want any issues.
    Nails used on pallets have a glue on them that binds to the fibers with the heat generated from the nail going in. That's why they are so hard to break apart. By dropping it, or 'squishing' it from the corners, you are forcing it out of square and breaking the bond of the glue. Don't believe me, TRY it and let me know! GAME CHANGER!

    • @Swift1156
      @Swift1156 Місяць тому +3

      Will try this bit of wisdom out, thank you sir

  • @scottcampbell96
    @scottcampbell96 Місяць тому +277

    I read the title as “Cheeseboard” and wondered “who would use pallet wood anywhere near food?”

    • @sagemagicWow
      @sagemagicWow Місяць тому +4

      😂

    • @fadetonoir6152
      @fadetonoir6152 Місяць тому +24

      Okay, how about a chess board where the pieces are made out cheese and you get to eat whatever you capture?

    • @sssaaammmd
      @sssaaammmd Місяць тому +2

      I also read it as Cheeseboard hahaha

    • @TheZephyrChannel
      @TheZephyrChannel Місяць тому +1

      @@fadetonoir6152 Genius

    • @rithhhzz.gaming
      @rithhhzz.gaming Місяць тому

      Your not the ony one 😂😂

  • @ThatCardTi
    @ThatCardTi Місяць тому +27

    Waiting for the day Morley does a test piece. Not today!
    The best way to learn in from “failure” although not sure I would call any of this a failure. Great project.

  • @belindahameister5977
    @belindahameister5977 Місяць тому +94

    Pro tip: when trying something for the first time, do it on scraps of the same material, NOT the project itself!

    • @mschauer97
      @mschauer97 Місяць тому +5

      that's what i though as well. Maybe he did and just didn't include the recording in the video.

  • @fauge7
    @fauge7 Місяць тому +710

    The board is set up wrong... The queen always starts on her color

    • @fadetonoir6152
      @fadetonoir6152 Місяць тому +137

      The Queens are technically in the right place, but on the wrong colour because the board is the wrong way round - should have a white square in the bottom right corner from each player's perspective.

    • @rileykellogg2935
      @rileykellogg2935 Місяць тому +21

      And in some shots, the pawns are on the first rank!

    • @modernlegend_gaming
      @modernlegend_gaming Місяць тому

      oof

    • @1ma4ighter
      @1ma4ighter Місяць тому +12

      Meh, good thing he didn't make it to play with

    • @cabrerarodrigo82
      @cabrerarodrigo82 Місяць тому +4

      Wow, the most basic thing to get wrong

  • @DJMetalstone
    @DJMetalstone Місяць тому +1

    Awesome project looks pretty high end well done . Allot of detail in that. Thanks for also including the hourly rate on this at the end. It really helps for people starting up shop now or in the future to have a guess as to how long certain things should take and if it's worth it with current skill level or that it would be a loss for now. Seeing multiple of these kind of projects across UA-cam helps us average woodworkers get more ideas and crafting skills to expand on. I always love Reclaimed wood projects , especially if it's from raw salvaged to high end upscaling like this.
    Right now I'm slowly upscaling my workshop wood shed bit by bit be being very 3 dimensional about my spacings of my machines. My shed is only 3.5 x 2.1 metres so about 7 square metre in size. So I'd say bit over 20 square feet , yes very small for wood working and actually to small. I'm doing my projects making segments put together from smaller pieces since I can't cut or plain full 6 a 7 feet boards in my shed . ( It's Just a tiny shed meant to store bikes since I live in an apartment and it's in the basement of the complex ) . It's enough for now. I'm upscaling the inner design of the shed to as appropriately as I can mount my machines in there as work stations to have it transform my apartment into a cabin in the woods kind of look ( for as much as I can legally can it's a rental afterall ) . But paneling all the walls with wood panels and making furniture combined with cast Iron metal door hinges and everything :) I plan to use all reclaimed wood for the wood part of it.
    Keep up the good work :)

  • @satis_btc
    @satis_btc Місяць тому +60

    LETS GOOO NEW PALLET PROJECT, I have been waiting 8 months for this moment

  • @lordhickory3322
    @lordhickory3322 4 дні тому +1

    I love this. In my year abroad in Canada I had half a year of woodworking class - the first time I really came into contact with all the different kinds of saws and machines and woodworking in general - and after finishing the projects given to us by the teacher I had a few weeks spare before the end of the year in which I got to do my own project. I decided to make a chess board as a gift for my father, and I made it out of maple, walnut, and african padouk for the edge. It wasn’t perfect in any sense, and there are quite a few big gaps between the rows (as you said, tiny mistakes multiplying themselves), but it still looks great overall and I‘m really happy with it seeing as it was my first own project, without and guidebook or instructions. This video reminds me a lot of that. Thank you so much!

    • @lordhickory3322
      @lordhickory3322 4 дні тому

      (With „big gaps between the rows“ I mean the rows not perfectly lining up, so there are visible steps in the pattern)

  • @lorrainebrunner2490
    @lorrainebrunner2490 Місяць тому +7

    I have a recommendation that can help you.
    When you come across something you're unsure of, like with flocking the droor, ALWAYS test it on scrapped material before applying it directly to the project. Just replicate the conditions and see how it turns out so you don't have you restart all over again. 😊
    I hope this helps. Good luck! 👍

  • @Chiselchip
    @Chiselchip Місяць тому +20

    That pallet you passed on first 00:32 looked like Oak, but the one you settled on looks nice for sure!

    • @MorleyKert
      @MorleyKert  Місяць тому +9

      Haha I thought that as well while editing the footage 😂

    • @Chiselchip
      @Chiselchip Місяць тому +4

      @@MorleyKert it can always be deceiving in the moment depending on the lighting and everything 😄 beautiful build though, love the creativity!

    • @bobs8495
      @bobs8495 Місяць тому +1

      I was thinking the same thing, definitely oak

    • @ApexHerbivore
      @ApexHerbivore Місяць тому +1

      @@bobs8495 if it was oak you could tell from the weight. Would have been super heavy.

    • @TheDivergentDrummer
      @TheDivergentDrummer Місяць тому

      @@MorleyKert A knock on the wood is a good test as well. Hard wood will have a different tamber then soft lumber.

  • @Chariizard
    @Chariizard 3 дні тому

    ive been learning about wood and stuffs and i saw this vid of yours and its really great, were doing a project right now too and outside our rv were making a flooring and we are also using pallets from home depot and i feel optimistic after watching your video

  • @EastTactics
    @EastTactics Місяць тому +13

    Honestly, if you would’ve put it up for 8 or 9 hundred… you might’ve sold it. It’s unique one of a kind. And people pay for one of kind chess boards.

  • @emperorscorpiousii9675
    @emperorscorpiousii9675 Місяць тому +5

    The pinkish hue you mention the unidentified boards have at the start of the video are most likely just heartwood - it can be any number of species of tree, you just happen to have boards made from the center of the tree (the "heart"). Many species have a pinkish center, including pine, oak, and maple.

    • @imboerdfromlife
      @imboerdfromlife Місяць тому +1

      Thanks I was actually curious about that haha

  • @hansdegroot8549
    @hansdegroot8549 Місяць тому +1

    Great video. Thanks for sharing. You are one of the very few who shows all the expenses and spent time. 10 USD as an hourly rate is very low, but you learned a lot of new techniques on the go, and you for sure had also a lot of fun making it. The last two things are unpriceable.

  • @Thom1973
    @Thom1973 Місяць тому +3

    I am so glad you came back with these videos ......... your other videos were good and i do still like seeing them i just missed these ones also

  • @tanzekabe2305
    @tanzekabe2305 Місяць тому +8

    I like how the cat come to check each chess pieces with a good sniff

  • @collie147
    @collie147 Місяць тому +1

    I make to learn, discover and I have a particular drive to be creative, both to use my imagination but if I'm proud to have made something that's is the ultimate goal, and its all my spare time. If I make money from it, I put it back into the hobby. I'm making a financial loss overall, but to be fair it's fairly cheap as far as hobbies go, even if I buy my own equipment it's still cheaper than a golf membership!
    Anyway, you made something, learned something, honed your skills and somebody appreciated your work enough to pay for it. Even as a full time job it's a win win as you're establishing your reputation and brand as well. Brand is HUGE.
    Keep up the fantastic work.

  • @Geckob8
    @Geckob8 Місяць тому +9

    Morley! The 3/4 inch cutout pieces would work awesome for a 2D chess set with magnets! We have some stuck to the side of our filing cabinets in my office.

    • @tinag6855
      @tinag6855 Місяць тому

      That's a great idea! I was wondering what he was going to do with those. I was thinking of how a clock made out of some of them would be nice.

  • @treymack1874
    @treymack1874 Місяць тому +5

    Hi. I noticed in some videos that you’re using your tablesaw and freely pushing the wood through. You may want to think of using a tool to push it close to the blade just in case of a slip. Love your work.❤

    • @Zonatapio
      @Zonatapio Місяць тому +1

      He's using push sticks and it's on a sawstop

  • @TheShoxter
    @TheShoxter Місяць тому

    Your VO audio quality sounds really nice! The studio (closet) and whatever audio settings you use sound great!

    • @MorleyKert
      @MorleyKert  Місяць тому +1

      Thanks! I put a lot of effort into it recently 😊

  • @Shinypug123
    @Shinypug123 Місяць тому

    The flex seal worked so well and even looked better also great looking board

  • @isaaczeitoun7767
    @isaaczeitoun7767 Місяць тому +1

    Great video! I love how you breakdown the price.

  • @dancewithml
    @dancewithml 6 днів тому

    i use 77 at work. once it dries, the surface becomes like that of a post it note. It does this so that you can reposition the elements being glued. 77 sets with heat so after I get everything sprayed and positioned, i then heat it to set the glue.

  • @verbalance5630
    @verbalance5630 Місяць тому

    Cool that you show all, especially the mistakes and problems you can run into doing Projects. Good luck with your Channel 👍

  • @koccarter
    @koccarter Місяць тому

    i love youtube when suggesting quality contents, like this one. keep up the good work mate, love it.

  • @lulzmoney99
    @lulzmoney99 Місяць тому +16

    bruh you could just dye a test piece and sand that... why would you build the whole board and then see what happens when you sand?

    • @yours12342
      @yours12342 7 днів тому +2

      I thought the same with the flocking, both times he did it. Id have tested on a piece of scrap wood first.

  • @27Football.
    @27Football. Місяць тому

    I discovered this channel and i have to say that youre an absolute natur talent! Kepp going bro

  • @matthewmathis62
    @matthewmathis62 Місяць тому +2

    8:59
    "Buy the things you're bad at."
    I totally agree.

  • @Flummiification
    @Flummiification Місяць тому +1

    i really like how transparent you were with the cost. at first the price seemed a bit steep for the quality but I can absolutley value the time and effort that went into this wich would make it worth even more. It is a bit sad that even something relativley easy like this would have to cost so much to bie viable

  • @tayred81
    @tayred81 Місяць тому

    Nice job. My first thought was not another pallet wood video. You took it to another level, really liked the flocking part. Cool man, go Marley 💜🤟🏻

  • @Dean-w5z
    @Dean-w5z Місяць тому

    I watched one of your videos a couple years ago when you accidentally broke the leg off the table and I just found your channel again and subscribed and I’ve watched your videos all morning I love your channel. You’re very creative.

  • @albireo9
    @albireo9 Місяць тому +8

    That's a weird chess-setup variation at 16:56! I'm calling it "Morley's Pallet Chaos" variant.
    Traditional chessboard orientation: "Light square on right." Traditional chess-piece starting positions: "Queen's shoes match her dress." The white pawns start on a2 through h2; the black pawns start on a7 through h7.

  • @alfonsoPina
    @alfonsoPina Місяць тому

    Dude! that mic you started using is fantabulous. You sound great sir! Also, I'm stealing this entire process and video to have my Nephew to make one for his Annual ACE (christian school system) convention. I think this is a great build!!

  • @davidcouch6514
    @davidcouch6514 10 днів тому

    The Actor Charley Grapewin enjoyed hobby woodworking. My Ex’s Stepfather’s Father was General Manager of a Krohler Furniture Factory in Englewood, California, and let the Actor sort through “select” scrap piles as needed. Mr. Grapewin presented him with a handcrafted Chessboard in appreciation. I think our younger Son has it I’m gonna have to check the orientation lol.

  • @TheCtphotographer
    @TheCtphotographer Місяць тому

    Love this. I clicked as soon as I saw it was you and there was a pallet involved. Great work, it’s too bad there was so much of an expense versus the income. Take care!

    • @Corner_twisted
      @Corner_twisted Місяць тому

      I clicked this as soon as I saw a chessboard in the thumbnail (despite my pfp I also love chess!)

  • @ShadyButFresh
    @ShadyButFresh Місяць тому +18

    19:18 - holy smokes you did a great job covering up how bad the seams between the pieces were until that moment. Your miters are also glaringly poor (19:25) with that wood filler sticking out like an eyesore.
    I appreciate your ambition and look forward to you improving your craft with each project, but I personally wouldn't have charged someone the insane amount you did for this project.

    • @LoreTunderin
      @LoreTunderin Місяць тому +7

      it's almost an insult to charge that much for poor workmanship, especially when he couldn't be bothered to set the board up correctly for the final pictures.

    • @ShadyButFresh
      @ShadyButFresh Місяць тому +2

      @@LoreTunderin Hah no kidding. I didn't even catch it the first time, but apparently the board is built wrong entirely as well as white is supposed to be the far right corner for each player.

    • @LoreTunderin
      @LoreTunderin Місяць тому +4

      @@ShadyButFresh you can just rotate the board 90 degrees to get the corners aligned, but then the drawers don't line up. For some shots he also has the black pawns on the back rank with the pieces in front of them on the 7th rank. Just amateur all around.

  • @GamingStepByStep
    @GamingStepByStep Місяць тому

    That's just good business advice all around and applies to any venture: buy the things you are bad at / are tedious to do

  • @sammyfata-qb7tf
    @sammyfata-qb7tf Місяць тому +2

    I hate to be the bearer of bad news, but a light square should be in the lower right and upper left corner - you got it backwards also, the pawns should be in front of the rest of the pieces

  • @patriciahogg5763
    @patriciahogg5763 Місяць тому

    Beautiful!!
    Fun to watch you process your project!

  • @imequationzyt
    @imequationzyt Місяць тому

    Let’s goo thanks Morley love the woodworking videos, you’re one of the few UA-camrs I like watching

  • @awesomekacee
    @awesomekacee Місяць тому

    We use flocking in the model car world. How most people use it is spray paint down and then put the flock on the wet paint.

  • @olafzijnbuis
    @olafzijnbuis Місяць тому +19

    Nice work!
    But...
    At 16:39 the chessboard is in the WRONG ORIENTATION
    The lower-right Square MUST BE WHITE
    And at 17:08 the pieces are also in the wrong position. The Black Queen MUST be on a Black square.
    It is a good thing you did not put A...H and 1..8 along the edges.

    • @NxFals
      @NxFals Місяць тому +4

      Yes and no. At 17:08, the Kings and Queens are actually on the correct squares. That's where they would be if the board was in the correct orientation. But there are other parts in the video where he does place the Kings and Queens on their colored squares while the board is rotated 90 degrees, making it even more incorrect.

    • @Sir_Leelord
      @Sir_Leelord Місяць тому +1

      this drove me craaaaaazyyyyyyyyy

    • @olafzijnbuis
      @olafzijnbuis Місяць тому +2

      @@NxFals Good comment. You are correct.
      I have seen heavy concrete chessboards in a park with fixed concrete benches... All in the wrong orientation.

  • @Coffeetheegreat
    @Coffeetheegreat Місяць тому

    Love these kinds of projects! Another great video Morley🫡

  • @TitoSabbyPH
    @TitoSabbyPH Місяць тому

    Again Amazing Work Morley! Great Job! Fan from the Philippines!

  • @Alex-ds4vy
    @Alex-ds4vy Місяць тому

    I am constantly checking your channel, love your videos!

  • @friday8370
    @friday8370 Місяць тому

    I forgot about flex seal!! 😂😂😂 you have such a big brain

  • @Brody-printing
    @Brody-printing Місяць тому +1

    Love seeing your maker videos!

  • @randomnonsense6333
    @randomnonsense6333 Місяць тому +1

    I just finished the other pallette ones and then this comes out yay

  • @3s-Woodworking
    @3s-Woodworking Місяць тому +30

    I kinda expected some 3d printed chest pieces.

    • @Corner_twisted
      @Corner_twisted Місяць тому +1

      Chest? Or chess?

    • @3s-Woodworking
      @3s-Woodworking Місяць тому

      @Corner_twisted sometimes your phone will auto correct and you don't catch the typo, but there's no need to point it out when you clearly know what I meant. Sorry for human error......

    • @mikep3813
      @mikep3813 Місяць тому

      My wife has some nice chest pieces

    • @maomekat2369
      @maomekat2369 Місяць тому +1

      @@3s-Woodworking Chest? Or chess?

  • @TotalBoat
    @TotalBoat Місяць тому

    What a cool way to transform pallet wood!

  • @Jords_A
    @Jords_A Місяць тому +1

    Test things before you assemble them? Test sand the wood square to see if it would lose colour, test the glue works with the flock?

  • @brendanlenane2685
    @brendanlenane2685 Місяць тому

    That turned out amazing. I've 3d printed a set of weighted chess pieces and i'm going to be making a board to go with them.

  • @Fin3dPrinting
    @Fin3dPrinting Місяць тому +3

    Looking good!

  • @rasmusvedel
    @rasmusvedel Місяць тому +6

    Don’t sand that high when applying a finish. You’re clogging the wood and the stain can’t penetrate. Stop at 120.

    • @JulienB_BTW
      @JulienB_BTW Місяць тому

      This is mostly true with a penetrating oil finish. He's using a top coat finish/varnish, so you can sand fairly high, especially pass the first coat.

  • @rlmartinusa
    @rlmartinusa Місяць тому

    Morley, have you considered in determining the price you’ll ask on a project like this, calculate backwards. First determine the minimum you expect to make on your hourly efforts then multiply that by the number of hours you worked on the project. Then add your expenses on for the total asking price. You can always lower the cost if you decide you’re not getting hits.

  • @JoesExpressLLC
    @JoesExpressLLC Місяць тому +1

    You could have used the cutouts from the drawer inserts to make more chess pieces. Just needed to file them round instead of flat.

  • @patriciahogg5763
    @patriciahogg5763 Місяць тому

    Beautiful!!
    Fun to watch you process your project!
    19:59

  • @EyeBallGamers
    @EyeBallGamers Місяць тому

    i made my first guitar out of poplar but i didnt like how green it was so i used oxalic acid on it and it came out a really beautiful brown, a lot of pallets are made of poplar so i suggest trying that for a future project it really does come out nice and not as ugly as everyone says poplar is.

  • @eyecandy-gaming
    @eyecandy-gaming Місяць тому

    pallet projects like most wood projects only will make good money if you record the process and start a youtube channel. That way you capture your time in stead of use your time. Then the project goes from Price per hour to views per project and there is no time limit for the viewing to happen.

  • @davebauerart
    @davebauerart Місяць тому

    Nice results! Those chess pieces work well with the design of the board. Would be interesting to see if there’s a way to soak and get the ebonizing to sink in.

  • @dronko-fire-blaster
    @dronko-fire-blaster Місяць тому

    very nice, Im makeing a literal building out of palettes, I dismantle them and make them in to wall segments and over parts, I have several that I can not dismantle and one thats part of a wall that almost impossible to put screw's in even with a impact driver.

  • @Ryber1
    @Ryber1 14 днів тому +2

    “I turned a free palet into $500 chess board” using $5k+ machines for it tho

  • @Hasan-xj8jy
    @Hasan-xj8jy Місяць тому

    you just got yourself a new Subscriber and from only one video

  • @woodyourather7835
    @woodyourather7835 Місяць тому

    Great video! I built a board exactly the same way. Within a year, it turned into a warped mess. I guess you can't glue thick wood to plywood and expect nothing to happen. Wood movement will cause problems.

    • @johndrummond3954
      @johndrummond3954 Місяць тому

      I've been down a bit of a rabbit hole watching wood u make it videos on chessboards and he makes the playing surface twice and glues on each side if the substrate to avoid exactly this.

  • @rossmurrayfam1568
    @rossmurrayfam1568 Місяць тому

    this was awesome buddy, well done

  • @JK4fam2008
    @JK4fam2008 Місяць тому

    I’ve missed this style of videos

  • @get6149
    @get6149 Місяць тому

    Good to see you wood working again

  • @ryanschultz6633
    @ryanschultz6633 Місяць тому +1

    It's amazing watching your videos now after watching you from the beginning. I remember the no name, portable tools and now you're rocking Sawstop, Milwaukee, Hammer.......crazy.

    • @MorleyKert
      @MorleyKert  Місяць тому +1

      Thanks for sticking around’! To be fair, the sawstop and other big tools are owned by the hackspace where I’m a member, but it’s a great way to get access to big, great tools!

    • @ryanschultz6633
      @ryanschultz6633 Місяць тому +1

      @@MorleyKert Gotcha. Either way, I was just happy you got to that point. Well deserved.

  • @stanwiggins3423
    @stanwiggins3423 Місяць тому

    I wonder if this would be an opportunity to put the squares in a larger bag like a vacuum bag you put steaks or a woodworking vacuum bag, liberally coat each square with a flood of the dye, then apply the vacuum to suck the dye into the wood at a greater depth?

  • @mylastlight
    @mylastlight Місяць тому +1

    I'm spray glue is like a contact cement, you spray 2 items wait till it's tacky and glue them together, that's probably why it didn't work

  • @ivan_pr
    @ivan_pr Місяць тому +3

    Commenting for the algo, glad to see this kind of videos back !

  • @Lou13Cyf3r
    @Lou13Cyf3r Місяць тому

    cherry usually has orange. i made bar top with a live edge cherry.

  • @ezforsaken
    @ezforsaken Місяць тому

    the problem I see with the pallet wood money-making is that people use them to make nice stuff (like this chessboard which looks amazing!), but you have to spend time to make palletwood look nice, by that standard just buy good wood. Palletwood can make well rustic looking stuff; rustic desks, decor, shelves, boxes, and so on; but mind you those won't sell for a high price.
    I make things with palletwood but just for myself and they are "good enough" but I don't take that long and you know it's free wood; if you work it as little as possible and rush it as much as you can, for projects that don't need to be very pretty, it's amazing.

  • @masterfranco1991
    @masterfranco1991 Місяць тому

    Nice project! i hope wood movement was taken into consideration.

  • @OoPp-rl4gp
    @OoPp-rl4gp Місяць тому

    The only thing that i feel is off, is the green instead of red underneath the chess pieces, but overall really clean! well done

  • @mikej557
    @mikej557 Місяць тому

    Should have set strong magnets under each square and piece. But remember to get the polarity correct.

  • @ConstantXplorer
    @ConstantXplorer Місяць тому

    Environmentally conscious people appreciate and understand the time, effort, and artistry of upcycled furniture/fixtures. Even though it's slowly becoming a trend, it's well worth the money despite people's reluctant response. I dig it myself and would love to buy unique pieces... with an environmental thought in mind.

  • @sportsbank8428
    @sportsbank8428 Місяць тому +6

    You can always count the video views as part of the profit though. Which makes creating the chessboard recurring income.

    • @Zachattack0_0
      @Zachattack0_0 Місяць тому +1

      These videos are tailored to people interested in woodworking, and the profit is showing what they could similarly make. Sure he benefits from the UA-cam revenue, but that isnt what the point of the video is.

  • @NonyaBuzinezz
    @NonyaBuzinezz Місяць тому

    Why not use a sanding sealer instead of sanding? It would level the surface and is a great primer for almost all finishes.

  • @Vhez5
    @Vhez5 Місяць тому

    i love the smell of plywood after its in the laser cutter 🤤

  • @AZbone
    @AZbone Місяць тому

    Fill a large tote with the solution and place the pieces into it to soak for a minute or so then remove them. It will soak deeper

  • @kenney8656
    @kenney8656 Місяць тому

    Great project! You did good!👍🏻

  • @justcars2454
    @justcars2454 Місяць тому

    I dont know but i think if this video reaches at least 200k(166k) views of this video will make arround 2000 dollar it would be good. Its a good idea where making videos can cover a lot of expences, like you sell it for 400 dollars, and this video will make 2000, maybe another 500-1000 from the links and refferals on this exact video, its good in the end. While if its about someone who just sells his products without social media, its kinda hard i think, i dont know anything about wood, i just watch for entertainment, so maybe iam super wrong

  • @PitchBlackCat
    @PitchBlackCat Місяць тому +1

    why, my guy, do you not test stuff on some scraps? xD i'm glad you were able to salvage both the sanding slip up and the flocking fiasco. The result really slaps 👏

  • @KegaB3
    @KegaB3 Місяць тому

    as someone who recently found out that it would be a long time until i can work a conventional job again, this looks like a whole lot of fun for 13 an hour

  • @bsharpmajorscale
    @bsharpmajorscale Місяць тому

    AND you get a bonus set of chess pieces from the cut-outs for the drawers!

  • @rossmurrayfam1568
    @rossmurrayfam1568 Місяць тому

    awesome video buddy, very well done

  • @erikleorga
    @erikleorga Місяць тому

    That 2nd pallet you were looking at was likely a hardwood, possibly ash.

  • @rinkeydinkey
    @rinkeydinkey 25 днів тому

    Chess pieces should always be on the board they look beautiful

  • @Viken43
    @Viken43 Місяць тому

    Do not see buying chess pieces as a weakness, most of us do not have the time or tools let alone the skills needed..... total win in my book!

  • @GOBINDOS
    @GOBINDOS Місяць тому +4

    7:17 just dip that wood for some time, you fool 😂😂😂😂😂😂

  • @glengoesthere
    @glengoesthere Місяць тому

    I love chess, and I love the look of this chessboard...nice job!

  • @jennaelizabeth3980
    @jennaelizabeth3980 Місяць тому

    Love love love this kinda stuff!

  • @buckykattnj
    @buckykattnj Місяць тому

    Those greenish boards remind me of mulberry. I don't know if that would end up in a pallet, though.

  • @djmdog8754
    @djmdog8754 Місяць тому +2

    Nice to see you back doing woodworking projects

  • @InternetLoreTruth
    @InternetLoreTruth Місяць тому

    I used that box website in my course work for school

  • @SparkTools
    @SparkTools 17 днів тому

    Love this! Great video