Where is the electrical part? I just see you putting parts in a box. but what about wiring them up.where the wiring schedules and the cable lengths. How do you know what wire lengths you need and where to route them.
البرنامج إصدار 2021 ولكن كافة العناصر تم تصميمها بشكل شخصي وهي غير متوفرة في البرنامج ، للحصول على بعض الأجزاء بشكل مجاني من خلال الرابط التالي : grabcad.com/ahmed.farawi-1
Can you upload the library you have somewhere? I'm looking in grabcad and other websites but can't find some of the things you seem to have there! If that wouldn't be a problem, it'd be great. Thanks for the video!
Sorry lockdown bored but This is a mechanical engineer attempting to design an electrical panel So apart from the issues I have with the presentation This has virtually no value for an electrical engineer as all the important information does not exist Where is the wires and cables ? 1) First two minutes wasted designing a box of indeterminate dimensions instead of downloading the stp model from a cabinet manufacturer 2) Next minute and a half using pre set lengths of cable trunking and din rail how are you going to get the correct cutting lengths? 3) Spent time putting electronics board inside a component why? 4) Spent long periods of time modifying parts pasting jpegs onto them why this should already be done in the inventor part 5) At about 6 mins an aerial magically appears on the side of the panel bit of bad editing there 6) Time spent creating screws from scratch (what happened to the standard components library supplied with inventor) 7) Good one here looks like a solid-state relay being fitted onto a din rail, but the relay pack does not have a clip to mount it on the rails 8) Time spent duplicating and fitting terminals (now its noticeably clear it’s just a mechanical package all electrical design packages that have 3-d modelling capabilities would place the whole terminal block down in one action) 9) School boy mistake how are you going to tighten the glands in the middle of the array of glands 10) Where the contacts on the switches the clues there the emergency stop has contacts? If your going to do something like this make sure your doing it right Look at these proper 3d panel designs ua-cam.com/video/42Ls1V3aWD0/v-deo.html ua-cam.com/video/ziJWyf7VRP8/v-deo.html
Thank you for your notes and i am sorry for the wasting time . really this design is my first design and I will work to learn the notes that you mentioned to me and thank you very much ^_^
Winner of a video, been searching for "mit free engineering courses" for a while now, and I think this has helped. You ever tried - Senarper Salient Secret - (just google it ) ? It is a great exclusive product for discovering how to have free power in your home minus the hard work. Ive heard some interesting things about it and my cousin got amazing success with it.
Congratulations on showing that it is possible to create an electrical board in Inventor, but we start with an electrical scheme first and then the board information is generated ... Example Eplan!
@@FlyWithElectricity I mentioned or Eplan that in my opinion, it is one of the best and most expensive! But, I also work with AutoCAD Electrical and I know that electrical schematics are performed by Inventor. Because I know SolidWorks in mechanical parts, if I have both, I prefer to migrate to SolidWorks Electrical. Develop cool videos between the two platforms (AutoCAD Elctrical and Inventor)!
This was great, thanks, I have been researching "free wiring schematic software" for a while now, and I think this has helped. Ever heard of - Senarper Salient Secret - (just google it ) ? It is an awesome one of a kind guide for discovering how to have free power in your home minus the headache. Ive heard some great things about it and my buddy got amazing success with it.
donde consigo toda esa libreria? genial!
x2
absolutely amazing. is it an easy software to work with?
Great job Muhammad, how can I get the library where you use electrical items?
يعطيك العافية .بعد تصميم اللوحة كيف يمكن اجراء التوصيلات الكهربائية ومحاكاتها للتاكد من صحة العمل.وجزاك الله خيرا .
Assalamualaikum..Mr.Ahmed F, how do you get simatic hmi or cable duct??
Thx..
you can find it in in GrabCad
@@FlyWithElectricity thx broo
شكرا على الفيديو ، هو حضرتك الخطوه التانيه بعد التصميم ، ممكن يتربط مع توصيلات ازاي
Which software it is .
Autodesk Inventor
amazing, i'm happy to see the result finally finished, this program is really impressive. 🇧🇷
grabcad.com/ahmed.farawi-1
@@FlyWithElectricity hello how to get the files like cable duct and other electrical components
ممكن اسم البرنامج المستعمل .. عمل راقي مبدعين ما شاء الله
Autodesk Inventor
Hi friends, my Inventor don't have theses electrical components, could you please tell me how can I find this ?
In fact, these elements are not included in the Inventor , you can find them in my GrabCad account
grabcad.com/ahmed.farawi-1
Where is the electrical part? I just see you putting parts in a box. but what about wiring them up.where the wiring schedules and the cable lengths. How do you know what wire lengths you need and where to route them.
Thank you for watching the video. In fact, this is a presentation and marketing video rather than an engineering video.
@@FlyWithElectricity your marketing to engineers...
May i know the name of the software and its a free version
Autodesk Inventor
wow it is nice work! how can i get the libraries
hey.i like your video.but im am intern at electric factory.can u send me this video has more detail version.or can u help me to find this?thank you...
grabcad.com/ahmed.farawi-1
جزاك الله خير الجزاء اخي الكريم
هل توجد مكتبات جاهزة للانفيرتر مثل الكيبل تري و السيركت بريكرز وما شابه ذلك
للأسف لا يوجد مكتبات
@@FlyWithElectricity
الاخ الكريم احمد
اين يمكن ان نجد الكمبوننت لاجل تطبيق الدرس جزاك الله خيرا
@@hayder.ismael من الممكن أن تجد بعض العناصر غلى موقع GrabCad تحياتي أخي الكريم
Doesn't show all the step on order to replicate this design
grabcad.com/ahmed.farawi-1
اي اصدار البرنامج ٢٠١٩بيشتغل هيك ولازم نزل كل ملحقات البرنامج أثناء التنصيب
البرنامج إصدار 2021 ولكن كافة العناصر تم تصميمها بشكل شخصي وهي غير متوفرة في البرنامج ، للحصول على بعض الأجزاء بشكل مجاني من خلال الرابط التالي :
grabcad.com/ahmed.farawi-1
@@FlyWithElectricity تصاميم روعة والقطع باينة حقيقة
للأسف الموقع مافتح في غير طريقة احصل عليها وشكرا الك مهندس
@@آيةعزالدين-ش7ظ grabcad.com/ahmed.farawi-1/models
its amazing my brother nice working i like it very much
Thank you muhammad
Which are you used program for this writing box
Autodesk Inventor
Is this autocad?
Autodesk Inventor
hi bro. how can we get the online training for this soft where .
محتاج برنامج يصمم شغلات ميكانيكيه يعني عندي فكره اريد اصممها ولكن لا اعرف ماهو البرنامج المناسب يعني أستطيع من خلال البرنامج احرك الاجزاء وارسمها 3D
Autodesk Inventor
which software
Autodesk Inventor
Which application are you use for editing UA-cam videos?
adobe premiere pro
which software used
Autodesk inventor
is it autocad elctrical 2019?
Autodesk Inventor
What is name of this software plzz anyone can tell me
Autodesk inventor
Software name please.
I desperately want to learn this
Autodesk inventor
Which Software is this?
Autodesk Inventor
Superb video. You are a Designing Rockstar.
Thank You 🌹🌹
@@FlyWithElectricity Do you also have skills in Electrical automation designing in AutoCAD?
هذا الشغل ببرنامج autodesk inventor ??
صحيح أخي
@@FlyWithElectricity اخوية ممكن ادخلنه دورة يمكم او اتعلمنه كيف واحد يوصل هكذا مرحلة في هذا البرنامج ....
إن شاء الله أخي، تابع الفيديوهات التي يتم نشرها على القناة
والله يااخي احنه في فارغ الصبر نتمنى كل يوم اتنزل حلقة
How can i get these blocks
you can find it in GrabCad
Wich is this software
Autodesk inventor
Can you tell me how did you get the components?
grabcad.com/ahmed.farawi-1
excuse me but is the file in this application , can be opened in autocad?
grabcad.com/ahmed.farawi-1
where can i download this programme ?
from Autodesk website
Can we chnge schematic to 3d panel
What is Softwar name ?
Autodesk Inventor
@@FlyWithElectricity Thank You Sir
Can you upload the library you have somewhere? I'm looking in grabcad and other websites but can't find some of the things you seem to have there! If that wouldn't be a problem, it'd be great. Thanks for the video!
afarawi97@outlook.com
Excusme sir. Can you send the library to my email?? sholehenginerindonesia@gmail.com
Thank sir🙏🙏
@@FlyWithElectricity please send it to me too🙏🙏
@@mhdrezza4607 grabcad.com/ahmed.farawi-1
Software names please
Software name pls bro
Autodesk Inventor
can u tell me the name of this software
Autodesk Inventor
Que programa es?
ما شاء الله تبارك الرحمن، شغل فخم جدا
شكرا جزيلا
Sorry lockdown bored but
This is a mechanical engineer attempting to design an electrical panel
So apart from the issues I have with the presentation
This has virtually no value for an electrical engineer as all the important information does not exist
Where is the wires and cables ?
1) First two minutes wasted designing a box of indeterminate dimensions instead of downloading the stp model from a cabinet manufacturer
2) Next minute and a half using pre set lengths of cable trunking and din rail how are you going to get the correct cutting lengths?
3) Spent time putting electronics board inside a component why?
4) Spent long periods of time modifying parts pasting jpegs onto them why this should already be done in the inventor part
5) At about 6 mins an aerial magically appears on the side of the panel bit of bad editing there
6) Time spent creating screws from scratch (what happened to the standard components library supplied with inventor)
7) Good one here looks like a solid-state relay being fitted onto a din rail, but the relay pack does not have a clip to mount it on the rails
8) Time spent duplicating and fitting terminals (now its noticeably clear it’s just a mechanical package all electrical design packages that have 3-d modelling capabilities would place the whole terminal block down in one action)
9) School boy mistake how are you going to tighten the glands in the middle of the array of glands
10) Where the contacts on the switches the clues there the emergency stop has contacts?
If your going to do something like this make sure your doing it right
Look at these proper 3d panel designs
ua-cam.com/video/42Ls1V3aWD0/v-deo.html
ua-cam.com/video/ziJWyf7VRP8/v-deo.html
Thank you for your notes and i am sorry for the wasting time .
really this design is my first design and I will work to learn the notes that you mentioned to me and thank you very much ^_^
Download untuk wire ductnya dmn ya?
Can you help me 3D cad library?
thank you
As far as I know there is no electric library in the inventor but you can find some things in GrabCad
Winner of a video, been searching for "mit free engineering courses" for a while now, and I think this has helped. You ever tried - Senarper Salient Secret - (just google it ) ? It is a great exclusive product for discovering how to have free power in your home minus the hard work. Ive heard some interesting things about it and my cousin got amazing success with it.
what is the software s name?
Autodesk Inventor
name of software?
Is this revit
Autodesk Inventor
Please!name program?
Software name please
Autodesk inventor
Interesante...
Congratulations on showing that it is possible to create an electrical board in Inventor, but we start with an electrical scheme first and then the board information is generated ... Example Eplan!
As me
But I use autocad electrical. I would prefer Eplan...
There is a way to link it with the AutoCAD Electrical Program I will explain it later Thank you for your interest 🌹
@@FlyWithElectricity I mentioned or Eplan that in my opinion, it is one of the best and most expensive! But, I also work with AutoCAD Electrical and I know that electrical schematics are performed by Inventor. Because I know SolidWorks in mechanical parts, if I have both, I prefer to migrate to SolidWorks Electrical.
Develop cool videos between the two platforms (AutoCAD Elctrical and Inventor)!
can you share library ?
Can someone tell me how to make this using revit ?
grabcad.com/ahmed.farawi-1
please give me this drawing file download link ty
grabcad.com/ahmed.farawi-1
الله يزيدك من علمه
ماشاء الله
تبارك الله
شكرا جزيلا
This was great, thanks, I have been researching "free wiring schematic software" for a while now, and I think this has helped. Ever heard of - Senarper Salient Secret - (just google it ) ? It is an awesome one of a kind guide for discovering how to have free power in your home minus the headache. Ive heard some great things about it and my buddy got amazing success with it.
Soundtrack name?
Autodesk Inventor
استاذ ممكن شرح مع الفيديو او تقليل سرعه الفيديو من اجل التطبيق لان سريع جدا
Thankអរគុណ❤
Super
Thank you !
شوووو اسم هاد البرنامج ؟؟؟؟؟؟
Autodesk Inventor
☘️
جزاك الله خيرا
مرحبا شو اسم البرنامج لو سمحت
Autodesk inventor
Name de logiciel
Autodesk Inventor
Solidworks Electrical is far more streamlined.
ما شاء الله فخر العرب
can you give me this file
grabcad.com/ahmed.farawi-1
Еба ты крут чувак. Я охренел
grabcad.com/ahmed.farawi-1
اذاى انزل البرنامج ده
من موقع شركة Autodesk
Nama aplikasinya apa
Autodesk Inventor
This video is very we cant get benefit from
I’m sorry that you didn’t benefit from the video, which is a project I recently made.
In the coming days I will present a detailed design method
@@FlyWithElectricity you made this video very fast because of this i cant get benefit
انا اورید هذا فايل
grabcad.com/ahmed.farawi-1
Which software is this?