Hi, I’m using Andy 3” siding snips amzn.to/3QD05Zv these are my go to snips for vinyl siding. And yep I cut out the trough of the side j-channel sometimes before I put it up. Sometimes I run them long and leave the top not nailed so I can cut it out when I finally get up there.
Hi Jesse, they are made by Malco and they are called “Andy snips”. I pinned a comment that has an Amazon affiliate link directly to the snips I use, but feel free to shop around.
Good sharp snips make for a cleaner looking job! I use the Andy Malco 12” snips, but I’ve seen people use the shorter Wiss snips and those work well too. I just prefer to have less weight in my bags so I stick to one set of snips. Most brands make lefty and righty snips which can be helpful in different situations.
i do a lot of my own home stuff repairs and what not...and just had my house resided in the last year ...and my best friend he owns elk county contracting so he did it and did a great job... but there is some things that i want to cover with siding that he did not manly because they were not the way they are now when he did the job... but now that i have got them in the almost finish scenario...i wanted to finish them off with some siding ...and i am doing it myself with some extra vinyl siding that was left over ...so having someone who has great ideas and breaks it down in a manner that i can easily replicate is awesome! i can ask my friend but he already gave me a great deal and then he put my roof on for free i just had to buy the metal so i dont want to think i am taking advantage of him or not appreciative of everything he did for me...i value my friends too much...so i Appreciate ya man I live in Kersey PA Elk COunty PA! High wind area so this way of 45 ing j channel works for my area and purpose times a 100! THanks man!
Amazon affiliate links to the tools I use:
Fat max tape measure amzn.to/3ZF9ROI
(Expensive but nice) Stiletto hammer amzn.to/3waImyV
-or-
(More affordable) Estwing hammer 16oz
amzn.to/3QCKKrX
Carpenter pencils amzn.to/3QEO4T8
Sharpie markers amzn.to/3IKxG1H
Empire speed square amzn.to/3kmDxQo
Irwin chalk line amzn.to/3iyfRbD
Andy 3” siding snips amzn.to/3QD05Zv
Malco siding removal zip tool amzn.to/3COkLrw
Malco snap lock punch amzn.to/3Ws0f7r
Malco trim nail punch amzn.to/3XxU6ra
Malco nail slot punch amzn.to/3ZzKxtr
Malco hand seamers amzn.to/3COWhhT
(A little pricey) Occidental tool belt I use amzn.to/3QD0lYs
-or-
(More affordable) AWP Tool belt amzn.to/3XtstiS
Empire 10” Torpedo Level amzn.to/3GK9nhx
Lenox Gold utility knife amzn.to/3CO4L94
Buck Brothers chisel set amzn.to/3IM6Bez
OMG -- clap you off on that technique, sir! Simple, yet professional. Thank you!!
You’re welcome! Glad you find it helpful!
Great Process, Great Demonstration, Thank you for sharing.
No problem! 😊
Love this video- straight to the point and shows exactly no extra words and great tech- thx!
No problem! And yeah I try to skip the 4 minute intro lol. Glad you like it!
I got all my guys making sure they do this!
That’s Awesome!
amazing, simple as that, you are the best, thanks a lot
You’re welcome! 👍🏼
Trying this in the morning
Thanks
No problem! Hope it works well for ya!
Very nice 👍
Thanks!
Ahh, ok thanks for the tip. I do some stuff at my top corners but I like that extra part to hold the mitre tight
You’re welcome!
Clean work sir🤘
Thanks!
I found that the big cutters make it crack the little ones not so much. I actually tested that one day.
I’ve never tried that. I wonder if it has something to do with the smaller snips being more curved.
@sidingschool , Sir, I think it is because the small snips cut slower, so the material has a chance to "warm" up a little, by the way great video!
Interesting.. and thanks!
Looks good 👍
Thanks!
I like that my brother i always cut it
You betcha!
Is this for all corners?
In this video I do use that method on all corners: How to install J-Channel around an opening
ua-cam.com/video/vsPlNPjci8A/v-deo.html
Damn, what are you using for cutters? Cutting like paper. Also did you precut channels into side pieces. Bottom piece?
Hi, I’m using Andy 3” siding snips amzn.to/3QD05Zv these are my go to snips for vinyl siding. And yep I cut out the trough of the side j-channel sometimes before I put it up. Sometimes I run them long and leave the top not nailed so I can cut it out when I finally get up there.
Had the same question . About trimming vertical piece. Thought I was missing something
Smooth!
Thanks, many years. Lol
HEY - *I LIKE THAT* Just found, liked & SUBSCRIBED! (Everyone should - IT'S FREE!!!
Hey welcome aboard! 🛳️
Who's the manufacturer of those shears
Hi Jesse, they are made by Malco and they are called “Andy snips”. I pinned a comment that has an Amazon affiliate link directly to the snips I use, but feel free to shop around.
@@sidingschool
Just bought them, thank you for the link.
The technique is great but without the right snips, your results won't be nearly as clean.
Good sharp snips make for a cleaner looking job! I use the Andy Malco 12” snips, but I’ve seen people use the shorter Wiss snips and those work well too. I just prefer to have less weight in my bags so I stick to one set of snips. Most brands make lefty and righty snips which can be helpful in different situations.
FUCKIN GENIOUS BRO!
i do a lot of my own home stuff repairs and what not...and just had my house resided in the last year ...and my best friend he owns elk county contracting so he did it and did a great job... but there is some things that i want to cover with siding that he did not manly because they were not the way they are now when he did the job... but now that i have got them in the almost finish scenario...i wanted to finish them off with some siding ...and i am doing it myself with some extra vinyl siding that was left over ...so having someone who has great ideas and breaks it down in a manner that i can easily replicate is awesome! i can ask my friend but he already gave me a great deal and then he put my roof on for free i just had to buy the metal so i dont want to think i am taking advantage of him or not appreciative of everything he did for me...i value my friends too much...so i Appreciate ya man I live in Kersey PA Elk COunty PA! High wind area so this way of 45 ing j channel works for my area and purpose times a 100! THanks man!
You have a great friend! I’m glad you’re finding these videos helpful!
Thank you Mr thank you
No problem!
Impressive
Thanks!