Noctua 140mm NF-A14 PWM and 120mm NF-A12x25 PWM (Meshify C Case)
Вставка
- Опубліковано 21 жов 2024
- Click "Show more" to see the entire description.
I did not disable comments. My Daughter has CP and years ago I documented her progress with walking. Since I have some videos with a minor in them, youtube disabled all comments on my videos for now. I don't know when or if they will ever be enabled again. For now, please feel free to reach me on Twitter or Instagram.
At full speed, the Fractal Design fans were loud! And a higher pitched loud than I could stand! So I replaced the two Fractal Design 120's for two Noctua NF-A14's 140's, put two of those at the top as well, and replaced the stock back fan with an NF-A12x25 PWM fan.
PWM (4 pin) fans are better than non PWM fans. They can be controlled via the computer! It knows when you're taxing your computer (so it turns the fans up) and it knows when you're just browsing Facebook... (so it turns the fans down).
VS having them at one speed and having to reboot to BIOS to change the speed. PWM is awesome! Noctua is awesome!
Get yours here: amzn.to/2IzjYyM
If you'd like to support my channel, my Amazon Affiliate links are directly below. By using my links, you'll be helping me out. I'll get a bit of kickback from each purchase.
US: www.amazon.com...
UK: www.amazon.co....
CA: www.amazon.ca/...
Please Subscribe to my UA-cam Channel.
You'll get notified as soon as I upload a new video!
Please Click Here: tinyurl.com/wwj...
Second Channel: bit.ly/wwjoshdu
Gaming Channel: bit.ly/wwjoshdo
Follow me on Twitter: goo.gl/wE3vF
Watch me Live Stream: goo.gl/fx1ZnI
Follow me on Instagram: goo.gl/ojTFn
If you’d like to donate, click here:
www.paypal.me/wwjoshdew
I have this case. I love it. My favorite case I've ever owned. This thing has so much venting I only have 3 intake fans and no exhaust fans. I took the mesh off the top. The 3 intake fans at 1000 rpm is enough to flow air through the entire case, I can feel a breeze coming out of the back and at the top. And everything stays very cool.
hi this is an interesting idea, can i ask what CPU and GPU you have, along with typical temp at idle and under stress. Love my fractal but quite warm at mo with 2x 140mm in front 1x120mm at rear cheers
I’m also interested in this. What kind of fans?
So it work better without exhaust fans?
To get an idea about how much fans you can connect to one header on the motherboard, it's just a matter of current the fans draws. The maximal current consumption of a fan is normally printed on the label, sum all fans up which you want connect, and be sure you stay below the maximum allowed current. This you can find in the manual of the motherboard, it's a round 1 A for the most. But good practise will be to separate the fans by location if you have enough headers on the board. This gives you more control over the system pressure.
you can also solve with a pwm hub, I got all my intake A14 to the pwm hub that comes with my case (a phanteks full tower) and I've to say it's really handy
Literally stumbled across your video. I have the Meshify C case too and just bought the same noctua fans. Great stuff. Helped me a lot.
Nice comment section, very silence here👌🏼
so I have a daughter. she has a disability. I shared videos of her progress and since she was a "Minor", UA-cam disabled comments across MANY channels 2 years ago. Mine included. They just let me have them back 3 weeks ago. So it reset ALL comments across my channel.
@@wwjoshdew that's sad. I wish u a and your daughter a wonderful life🕊️
Wish you luck man!
Noctua fans have a deeper hum than regular fans. They can be loud for sure, but it's much more enjoyable. It's weird :)
Best air cool setup I've seen!
So "cool"!
You shouldn't optimize you fan curv when your side panel is off. This kills the airflow, and static pressure these fans deliver. If it only was for filming purposes I get it.
good and really informative vid man,thanks for sharing,im replacing all my bequiet fans with noctua's nf-a14,hoping better airflow and qieter too:)
Doing this in 2024 with 7 120m noctua fans. The meshify C case is still so good so long later!
Thanks for the video! Direct, precise, clear!!!
One question, please: can I use them both for fan or exhausting, just by iverting mount position? Or are they designed for just one of the options?
Thanks!
The top right fan isnt doing anything apart from pulling cool air back out the case. Turn it off, you want that cool air being pulled directly into the cpu cooler.
No it creates a more powerfull airflow, even if there is loss of cool air, but yes it's probably the least usefull fan from the case
@@simon_roy so should you take it off ?
@@sodenoshirayuki4288 Depends, if you want to save money don't buy this one, but if you already have one spare go for it, it looks nice
I have this case. There is so much venting in this case you don't even need a fan on the top at all if you take off the extra mesh pad that lays on it. I took the pad off and I can feel a nice breeze coming out the top just from the pressure of my intake fans at the front of the case. Everything stays super cool too. Been running like that for two years now.
@@VROOOOOOOOOOOOOOOM So you're saying two 140mm front intake and one 120mm rear exhaust is good enough if you take the dust filter off.
Hi wwjoshdew! I also have a meshify c with two 120 noctua a12s on the front and one in the back. But mine are INCREDIBLY loud even when I set the fans to silent in the BIOS. I'm not sure what's happening to them. It's been like this for a year now and cooling is fine. Just super loud!
Haha, and you just did suffer it through for a whole year without troubleshootin? But dig deeper in the BIOS, and try and set the RPM manually to it's lowest, also make usre they are set to PWM. Then the classic: check what pin you put that fan in the back on, did you put it on radiator pump pin? If so you must set it to PWM so it doesn't go 100% all the time :D
@@laggmonstret I did troubleshoot a fair bit over time but couldn't find any solution so yes I have just got used to it haha. Thanks for the info I'll look into these
what programs are u using to configure fans
Hello, the frontal coolers in this case can be put on the back side, they will fit, the grid will not interfere?
Hello! Please tell me what you would recommend to me for the front panel: Noctua 120mm (3) or 140mm (2) ?? I will be grateful for your answer!!
Definitely 2 140mm. More air plus less noise
Man I bought the chromax version and it doesn't have all the cool stuff like splitters and rubber cover, it has only the spare corners of different colors D:
It's like Noctua sells the black version but hates you for not chosing their beige brown signature colors lol
😂😂😂😂😂that seems true
You have created a negative-pressure situation with a sub optimal airflow. To fix this you should either swap the front-top exhaust fan to intake or turn it off altogether. Both the CPU and GPU will appreciate that.
Would switching the front-top exhaust to intake make the airflow kind of weird since it would suck in some of the hot sir as well as an intake right next to an exhaust? I have the same case and looking to buy new fans
I have the same fan but I'm using it as an extra cooling fan. If I want heat going out of my pc, label should be down?
If you have 2 120mm on top to push air out, 2 140mm in front to suck air in and one 120mm on back to push air out, you are having negative pressure if i understand how all that works? So dust can be sucked up trough cracks without filter in case and with time have worse cooling?
You don't have to match it. There is so much mesh in this case and venting it will either pull or push any extra air through the many mesh venting areas of the case. You really only have to worry about matching flow rates if you have a very tight and sealed case.
The fans on the top are 120mm? The 12x25 versions?
No, they are 140mm A14 fans.
@@mgoogyi I see, thx!
yo bro amazing build, im 34 now and built my first PC when I was 14 after a while you kind of give up on cable management as long as it look good from the front and the back panel goes on then its all good 😉😂
Noctua is just Fan Porn. Put the 140mm in the back, two on my 240mm radiator in pull configuration and two on the front in push. It even stopped my Strix from coil whining on maxed out settings with rt high.
What were the temperatures before and after fan swap?
u can remove the psu shroud and have 3 120mm fans
Would the cpu cooler be able to fit in a micro tower case i dont wanna buy it with making the mistake of buying it then not having room
I don't know how in the hell did you install 2 140mm fans in the front, could you pls explain? Cause the noctua included fans are too short and too thick, there is no way to screw those in. 2x120mm is the only option. I got a fractal design r5
good video 👍🏻
HOW you connect them tell me ???
Depending on your motherboard, you may need PWM fan splitters to connect more than one on the same header. You may also need an actual fan hub for more precise fan control.
hi where do i install the software
Noctua os melhores fans da atualidade, não teem comparação com rivais, que não copiam os noctuas.
219,001views (yay, I'm the "1" in that =) and 1 comment? weird ...
since this video is more than two years old you've probably figured it out by now,
but for anyone else who watches this: *-never-** generally don't put more than 3 fans on 1 header!!!*
if the headers don't die immediately they will over time once the fans pull > 0.3 A
okay so I randomly stumbled across your other video where you mentioned that all of your comments got removed ...
that really sucks man, have never heard of something like this before :O
thanks for the comment. UA-cam reset comments on my channel. so everyone gets to be first on a ton of videos.
@@wwjoshdew apparently you didn't notice the reply above your reply? :>
@@misatzu oh snap. I clicked from my notifications and only saw the current one. My apologizies.
was looking to answer this very question. I just installed new fans in my tower... and I'm debating how best to wire them. All my motherboad chassis fan ports are open. I have 1 4 pin, and 2 3 pin connections. the current fans were all daisy chained to the front of my tower, I have no idea how they are connected, it's difficult to get to them. I think I'll just route the new fans to the motherboard. But will split them, 2 and 2 so I don't have 3 to 1 header.
needs more fan
agreed!
THE up fan can be the UPPER position the down fan can be the down as posible possition !! cold air INTAKE !
I'm gonna buy a beautiful Lian Li dynamic xl case and uglify it with Noctua fans.
Real men dont care about look man, all i want is performance and those noctua products nailed it
I use only proffessional Noctua fans.Iam their biggest FAN.
Wondering how much more real performance you can buy instead of wasting money on such overpriced fans
Because cooling isn't important? Lol
@@DrakonR cooling is important, but you can cool perfectly well with fans that cost 1/3 the price and work just as well as Noctua like the Arctic P14, plust they don't look like crap.
@@v0ldy54 sure sure. We could all use cheap loud fans, but choose quality over quantity.
@@DrakonR Arctic fans are just as good as Noctua, and they actually offer longer warranty ua-cam.com/video/rv1S9RhABa8/v-deo.html
You can get 5x140mm fans for the price of 1and1/2 Noctua, that's how stupidly overpriced Noctua fans are.
@@v0ldy54 Arctic fans have an annoying noticeable humming.