Hello! My blades do not seem to come close enough together. They are raised and lowered as far as they go and they just don’t match up. It was working fine and then randomly stopped because the knives don’t reach each other. Any assistance would be greatly appreciated! 🙏🏻
There are different ways depending on the make and model. See the video at about 2:30 on to see about moving the upper knife. On this machine you would loosen the screw on the left of the upper knife, slide the knife out, slide the new one in and tighten with the upper knife in the correct position.
Hello sir how to replace the upper knife?please help me so i can replace it coz its already dull i have already the new one but its very hard to remove the old one how to remove it?
A 10mm ratchet worked for me. I will note that the manual states that the lower knife should not have to be replaced as it is made from special materials. However if it is damaged, it should go to dealer. I was able to replace mine. My serger is from the 90's. You will need to exercise care about where the stop is on the round knob to the right. You may have to use your ratchet to spin the bolt so that the blade aligns correctly and the stop allows the blade to spring flush left to the lower knife if something gets rotated out of line (as mine did).
could you demonstrate how you loosen the upper knife?
After 100 vids watched I find a clear explanation about the position, adjustment and work of the knives. THANK YOU SO MUCH - from Argentina.
I just fixed my machine kinfes using this video!! Was having a problem adjusting it and your drawing made it clear thank youuuu!!!
Thank you! You saved my frustration on my serger not cutting correctly. This totally fixed it!
Excellent video with great closeups of the blade, thanks!
Thank you got me to fix my problem searched many sites but you where the best in explaining clearly thank you again your awesome
Thank you so much! I've been struggling for over an hour. You helped solved my issue.
Thank you for this great video! Very clear and concise instructions that are easy to follow.
I'm also grateful for your tip. My problem is finally solved.
Omg I know this is an old video but I appreciate this video so much Thank you, kind sir!!!
Thanks for this informatieve video.
Could you pls also show how to change, adjust the upper knife?
Thanks in advance
any tips for getting stubborn screws out to change the blade?
Thank you,I will try my best. I don't bknow why the upper knife keep hitting on the middle and refused to go down as usual. ❤❤
This was soooo helpful. That you for making just the video I needed.
Thank you very much! Very helpful video!👍
Thank you, I was going out of my mind about why my new blades still sucked.
Ahhh you are a life saver, thank you!!
Hello! My blades do not seem to come close enough together. They are raised and lowered as far as they go and they just don’t match up. It was working fine and then randomly stopped because the knives don’t reach each other. Any assistance would be greatly appreciated! 🙏🏻
Excellent explanation, thank you!
Please I need help on How can I change the blades on white super lock electronic 1934D?
Thanks 😊 🙏
Thank you so very much for posting this! I was able to do this repair myself, thanks to you. God bless you!
Thanks for this needed information🙏
But how do you lift it up so high?
how do you change the upper knife?
There are different ways depending on the make and model. See the video at about 2:30 on to see about moving the upper knife. On this machine you would loosen the screw on the left of the upper knife, slide the knife out, slide the new one in and tighten with the upper knife in the correct position.
How to slide the upper knife?i tried so hard but its too tighten to remove the screw😭😭😭😭
Why isn't my knife moving at all? Please help
Super helpful, thank you!! :)
Hello sir how to replace the upper knife?please help me so i can replace it coz its already dull i have already the new one but its very hard to remove the old one how to remove it?
A 10mm ratchet worked for me. I will note that the manual states that the lower knife should not have to be replaced as it is made from special materials. However if it is damaged, it should go to dealer.
I was able to replace mine. My serger is from the 90's.
You will need to exercise care about where the stop is on the round knob to the right. You may have to use your ratchet to spin the bolt so that the blade aligns correctly and the stop allows the blade to spring flush left to the lower knife if something gets rotated out of line (as mine did).
That is y I was having a problem I had the lower knife up high like a dumass wondering why can’t I do this
Thanks for the info it did the job
So so helpful thanks so much
Why wont any of you show the UPPER KNIFE??????
Brilliant!
That serger needs to be cleaned sir
Thank you!