Ebay remote how to reprogram or clone - 4 Channel RF Key Remote Control 315/433MHz
Вставка
- Опубліковано 23 кві 2019
- One of three types of re-programmable fob from ebay/china. These are great little devices usually cost €1.5 - €2 Delivered! Batteries last 1+ years too which is awesome!
- Наука та технологія
this saved me. Instructions that it came with had no mention of needing to reset the buttons first. Once I did, programming it worked instantly
I had no idea you had to reset it. I thought my 2 yr old had drained the battery so I got new ones and still wasn’t working. Turned out he had just pressed all the buttons at once and reset the thing. I feel a bit thick now but thanks for this video big help 😊
The solution for me was:
hold C and D until the flash
hold A and B until the flash
KEEP HOLDING A (this bit is missing in instructions below) AND RELEASE B THEN PRESS B THREE TIMES
the keys are now clear and there is no light when you momentarily press A, B, C or D
Hold down the letter button you want until it flashes and activate the key you want to clone.
Thanks that was the important bit
BROO THANKS SO MUCH IT WORKED BROO I TRIED SO MANY TIMES ON OTHER VIDEOS AND IT NEVER WORKED BUT YOURS WORKS!!
Thanks yours was the correct way for me. I got miner from Amazon and it has a blue backing on the fob
Thank you so much, this worked a treat. The included instructions were absolutely useless and none the tutorial videos worked either.
Just one question.. On the original garage key, my garage door lift button somehow got reprogrammed and I have to hold down the button constantly to raise the door, the lower button only works with one click.. How can I fix this?.. Does anyone know? someone
Thanks from Hungary!!!!!garage key cloned!
Nice one, mate.
Legend, worked a treat
Thank you
Thanks for that mate
Is the Genie GM3T or the ACSCTG Type 1 remote considered as 315/433MHz remote and can use this method? Thanks!
Thanks
Perfect 👌👍
How can i add new device and not clear previous ones (on A and B I already have two devices, but I want to ad on C and D 2 more new devices). I want to keepA and B, jut want to add to C and D without reseting A and B (don't have option to clone A nad B again)
Hi. My remote is continuously flashing and no combination of keys can stop this. Do you know what i can do?
I can clear them no problem. But after programming working earlier with button flashes I can’t get it to work again
I have tried many methods on youtube. The biggest unknown is if remote has fixed code or rolling. If this is rolling type of code you may not clone remote settings sadly.
0:37 - So what are the instructions for the OTHER two types ? I must have one of those because this instruction to reset codes didn't work.
I have a xtreme garage door opener and did I not work.
Hi, not sure if someone has the same issue. I have the same garage fob, but a few weeks after programming it's not working and I have to do the programming again. I even bought two and they both lost programming at the same time. Does anyone know what could be the reason?
thx works for me
Used the press B 3 times method and the copy code sets. But then it only works once, as if it loses the code as soon as you use it. Any ideas?
Battery might be dead or loose .
Just one question.. On the original garage key, my garage door lift button somehow got reprogrammed and I have to hold down the button constantly to raise the door, the lower button only works with one click.. How can I fix this?.. Does anyone know? someone
I have tried a few of these on my garage key remote but have not found one that will actually do it.
Same, I suspect the cheap 433mhz remotes are not compatible with my Chamberlain
Edit: Upon further research, I believe I need 390mhz
@@Angultra I have never found a result for this and I am still looking for one that will work, if my remote stops working I will have to buy a new garage door motor. I hope that you have more success than I have.
I bought the same control. I did everything you said and didn't worked! Do you have any suggestions? My original key is a pujol vario
mine also didn't work
Buy 380 MHz, 433 MHz is not compatible with your device.
On part 0:50 you said "gone" but the lead light flashed once the same as in part 0:30. I did exactly you showed. But nothing works. 😞
Hold A press B 3 times
Make sure it was reset
Press any key and the light not on
If the light when you press is on
It must be the reset fail
Then do copy
Hey, I have cleared the codes but the programming will just not sync! Any help here?
Most of these scams show the device cloning a garage door opener remote that looks like a car key fob. It is not for cars and doesn't even work on most modern American garage door openers.
Works well for me ;) check the frequency of your original garage remote before you buy.
It work with me only for one hour than I need to reprogram again 😅 can you suggest me.
That is annoying, sometimes the battery connect separates on them as they are cheaply made and that happens
Works for me, keys are programmed, but when I try it on garage doors, does not work. Any suggestions??
Your garage door opener probably uses rolling code technology. The code is scrambled and changed every time you press the button. The ebay listings for these specifically mention that they don't work with rolling code systems
@@trekgod3 is there on ebay/aliexpress keys with this rolling code function to order?
@@denis8321 nope. You need to look up the make and model of your opener and find a specific replacement
Hi, can you send us the link from where you get it?
bought the same control. I did everything you said and didn't worked! Do you have any suggestions? My original key is Hormann Promatic
You have to reset first
Press A + B till light blink
Hold A press B 3 times
Make sure it was reset
Press any key and the light not on
If the light when you press is on
It must be the reset fail
Then do copy
Double check the guide from the seller they all have ever so slight differences in the coding
Pressed the button at the same time but still all buttons lights up
Hi Any solution to your problem?
Hold A press B 3 times
Make sure it was reset
Press any key and the light not on
If the light when you press is on
It must be the reset fail
Then do copy
Can this mess up the original
Ok I I am ok
I have 2 alarm fobs for my jeep and 1 of the 2 remotes doesn't work . If I was to buy these universal remotes would they copy onto my jeep remote .
I've liked and subscribed to your channel . Can you put up a video on how to pair to a jeep / car alarm remote and show it with the vehicle before and after please . Thanks . That's a good Dublin accent . Keep up the good work pal .
haha! So funny I made this video ages ago and never checked the channel gas that is has this many views. Unfortunately I have a bmw and wife has a mini(also bmw I suppose) and I don't have any fobs that will pick up those freq. Might try finding one!
Didn't work for me it only reset
Cuz it may not be same mhz
I copy the code exactly as you did, the lights are exactly as yours, but then... doesn't work.
Same here very frustrating. I have looked at several videos on remote that looks identical but cant make mine work. Only get 1 blue flash. I can get fast flashing light by pushing both A&B or C&D but that’s it.
@@TomBTerrific yeh same result for me too. Product might be faulty.
Hold A press B 3 times
Make sure it was reset
Press any key and the light not on
If the light when you press is on
It must be the reset fail
Then do copy
Doesn’t work
Were you able to get this to work? I’ve had no luck.
@@TomBTerrific I have these notes in my phone. Have no idea if they’re the right notes or not though. Give it a try and let me know if it works.
New remote: Press and hold top 2 buttons until they flash a few times. keep pressing them and then press button 2 three times until lots of flashes.
Press and hold lightning (or button that opens the door) of current remote.
Press and hold button 1 of new remote until both flash lots. They are now paired.
Yeah I bought one but the lights don't flash on mine when I push the bottoms don't buy shit from China
It does not work Bác your sy.stem I’d not 433mhz. Buy 380 MHz to try.
How come does work for me? I reset everything cloned it. It picks up the new cloning, But it doesn’t work. HELP