Це відео не доступне.
Перепрошуємо.
Mora Garberg Carbon Review | 1 Year Of Use & Counting...
Вставка
- Опубліковано 15 сер 2024
- In this video I conduct a Mora Garberg Carbon review following approximately 14 months of usage.
I provide an insight into what has led me to using the Mora Garberg Carbon, what I've used it for and what I think of it...
If you're interested in buying a Mora Garberg and the price is right for you, then why not consider buying from my Amazon Affiliate store meaning that I earn a few pennies at no extra cost to you - www.amazon.co....
1. Watch the video.
2. Grab your gear.
3. Get outside, develop new skills, push your boundaries.
▶ I use a fantastic tool called vidIQ to help me grow this channel.
Sign up for FREE access here www.vidiq.com/#...
Seriously, try it out - you'll be glad you did!!!
▶ You can find out more about the Mora Garberg from Mora's own site morakniv.se/en...
#BushcraftPadawan #Bushcraft #GetOutside
That Aussie accent is so hard on my ears. 🤮👎🏾👎🏾👎🏾👎🏾👎🏾
And the stupid comment award goes to.... ☝️
@@chrisgibson2328 it still hurts my ears despite the location of the islands in question.
@@chrisgibson2328 that depends upon where I get started from.
And you?
@@chrisgibson2328 oh!😱
So you asked about my lineage, not my travel plans.
I am a wandering nomadic hermit by trade, so I must have be derived from a mix of ill smelly gypsies and hot tempered, cheese eating vikings.
Thats not aussie you clown, i am
The bit of full tang protruding from the pommel makes a safe bottle opener. Priceless for us beer drinkers! Thanks for the review. Great knife.
That's for that info, good to know 👍
Have a great weekend and don't forget to subscribe if you haven't already 😁
I currently have a few Mora knives; an Eric Frost classic that I was given new in the early 1960s, a carbon Companion, and a “Light my fire” Morakniv. I gave my wife and son Light my Fire knives, fat wood, and drier lint for one Christmas to include in their automobile emergency survival kits. Regarding the leather sheath for the Garberg carbon, I personally wouldn’t use it in the field. Leather can absorb moisture and retain it for a good amount of time, which is bad news for a carbon blade. I would opt for the plastic sheath for rust avoidance. The only knife I have for which I have a leather sheath is my U.S. Marine K-Bar combat knife (a former Marine Infantryman MUST have at least one K-Bar), but I store the knife outside of the sheath to ensure it doesn’t rust. I keep all my carbon knives with a VERY light coat of oil on the blade. I use a vegetable oil on the Companion because I also use it for food prep. I love all my Mora knives.
Hey Charles, thanks for sharing your own setup and perspective, it's really appreciated.
I also use food oil on my knives as I know it's always in plentiful supply in my cooking kit.
If you enjoyed this video and like the look of my channel it would be great if you'd consider subscribing 😁
Stay safe 👍
The knife with no name, name it! It is learning in that too. ;-) (and I do have several customs which gives me little joy) Never used the Garberg, but bought a dozen of the Mora2000 about 99/00, I ended up giving away 8 to friends and colleagues, kept 4 for myself for rather varied tasks, including rust scraping on a diversity of Sollihulls finest 4x4s, one as a field knife for my professional pursuits and two beaters. Still have them but 3 has broken at the tip, after serious abuse. As for my own personal go-to woods knife, I have been using the Fallkniven F1, one of the early ones in ATS34 steel since around 1995 and a second one in VG10, for everything from cleaning fingersized perch, and batoning firewood to grallocking, skinning and butchering Roe deers and Elk. Cant really fault it in anything other than the grip being somewhat on the small side for my rather large hands for wood working. I am finally about to test out the Sissipuukos M95 and M07 and both sizes of the Jakkari Puukos, may very well throw the Garberg into that mix as well, based on your review, even though I hold the Moras to be "the best knifes in the world without any pride in owning".
Hey Jens, thank you so much for offering such a detailed response and insight into your own clear experience in this area too, it's really appreciated 👍.
Did you pick up a Garberg in the end?
If you like the look of my channel it would be great if you'd consider subscribing.
Stay safe 👍
I’m using the mora garberg carbon on my deployment, not interested in a crowbar with an edge although I love my BK2. I think the garberg will suit my needs well after field testing it. Have to stay the field for extended periods. I’ve really got my eye on a fallkniven f1 pro one day. Great video on a great knife brother 💪. Cheers from Canada.
Thanks for the feedback T and also for sharing your own thoughts and experiences, it's really appreciated.
If you have the time and like the look of my channel it would be great if you'd consider subscribing and sharing to a wider audience.
Stay safe and look after yourself 👍
I've gone the other way with regard to the blades i use, rather than upgrade, i've downgraded, for many years i used some beautiful and expensive high end knives from makers like Stewart Marsh as well as Woodlores, Woodlore clones and some other lovely bespoke knives, but for the past number of years i've reverted to Mora 510, 511 (with the guard cut off), my original Mora Clippers, Mora Classics and Hultafors HVK's, bear in mind that before i fell ill i was out in the woods & countryside working, teaching and practicing/honing my skills at least 4-5 days a week and used my knives every day, sometimes hard work other days, just cutting a block of cheese for lunch, but they all got used. I don't know why i reverted back to basics, but it felt and still feels right for me, i'm not bemoaning anyone who uses high end tools, use what you are happy with, if it works for you it's great, like the knife that you don't mention, i think you mentioned it in a previous video a long time back that you didn't get on with it, but i know a few people who swear by them and won't hear a word said against them, just one of those things, there is no one size fits all, as i sit here typing this, on the desk is an old Frosts Mora Classic and an Opinel No8, can't get much more basic than that, but they work and suit what im doing today. I still take my bespoke tools out and about but mainly they are all drawer queens these days, shame in some respects, but it is what it is.
That is the same as me. I used to use really expensive knives... trc, chris reeve, lionsteel etc. But now I prefer to get as much knife as I can for the least money possible. When you get an expensive knife it very rarely does such a better job than a garberg, or any mora really. The garberg is all the knife a bushcrafter or camper will ever need. And when it comes time to finally get another knife I will just be getting another garberg. For the money its simply the best option on the market today.
Glad you're enjoying using the Garberg too Darren, "if it works, it works", right?!
Thanks Craig. Great video. Explanation for the tang at the butt of the knife. This is so you can make fire with one hand, if you have one arm injured you can still make fire. If the knife is placed at the rear of your knee joint and then kneel down, the knife is held firmly with the butt poking out for you to strike against with your good arm.
Love mine. Got the stainless and carbon and both seem as capable as each other imo. I don't see any need to spend more on a bushcraft knife either. All you'll be paying for is 'pretty' or 'i like to waste my money on impractical luxuries'. It's a tool. And i like the fact you don't have to be all precious with it.
Wow! Really enjoyed “finding your channel. Audio, your organizational thoughts, video and information was PERFECT.
Appreciate that you do not come across like some retired Warrior know-it-all that believes his way is the only way and who hasn’t smiled since....well, a long time.
Subscribing and looking forward to watching your bushcraft skills.
Take care.
Thanks ever so much for your positive feedback of me and my channel, I'm really pleased you've spotted those traits as I think there are enough "know it alls" on UA-cam as it is 😉
Much as I love Mora and I have many, the Varastuleka Jakkarai Pukko is a far better value for money package as the Garberg. Thanks for sharing and being honest in you long term review. All the best from Scotland. Garry
Hi Garry, many thanks for sharing an insight into your own knife choice and rationale, much appreciated 👍
I just happened onto your video. I recently purchased a Garberg stainless. It has become one of my favorites. I can really appreciate a review by someone that has obviously used this knife for an extended period of time and become very familiar with it. Very well thought out and informative. I normally take two or three knives when I go into the woods. You the old saying....two is one etc. and this on will be at the top of my list. So far a stropping has broufght the blade right back to shaving sharpness. Great video.
Thank you for your feedback Steve, I'm glad you appreciated and enjoyed the video.
Please consider subscribing to the channel if you'd like to see more in the future.
Thanks, I certainly will.
Very glad you are happy with your Garberg, personally I approached bushcraft from a more survival based point of view, and as such I believe that plastics or rubber are a bad handle choice, I have dropped my knives in the camp fire numerous times over the last 50 years but as they all had wood/horn/antler handle slabs there was no damage, also everyones hands are different so I prefer a knife that I can sand or grind the grip to fit my hand, also perhaps a somewhat old fashioned viewpoint but I believe the adage "your knife is your life" as such I prefer a heavier beefier blade that can be used abused and suffer no harm, finally I don't really need a knife for very fine carving because I lack the patience and the inclination, as long as my knife can featherstick, carve a seven notch, baton, and make a decent fireboard and spindle I'm happy with it; you have though almost convinced me that the Garberg is a good knife even though it looks like my mums old veggie peeling knife :)
Hi Sean and once again many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
Thanks for sharing an insight into your own knife choices and rationale 👍
The Garberg handle is actually insanely tough, it would not melt, ...well unless you take 5 minutes to fish it out😉. I think you would end up liking the knife its very comfortable esp in cold weather . The grip isn't a rubber style its very tough dense plastic and at first it feels cheesy but after good use it warms up and becomes very comfortable and more grippy.
I modify knives and add my own wood handles but the Garberg I left it alone, its a knife you never have to worry about breaking.
Great video, as usual. Since getting my Mora Garberg, my L.T. Wright GNS has sat on the shelf, almost completely unused. Nothing against the GNS-I absolutely love the knife (although it does require more maintenance against corrosion), but the Garberg is perfect for what I want out of a knife. I’m never looking back.
Hey Jonah, it's good to hear from you. I hope you're keeping safe and well? It's great to hear that you're enjoying your Garberg too 👍
Stay safe.
In response to hot spots on your hand from the handle. You can always use a fine grit sandpaper and smooth out where it is not comfortable for you! I do this with every knife I own! Just makes it custom for me! You should try sanding a little think you will be pleased with the outcome! Stay safe!
Hi Craig,
Thank you for sharing your experience with your garberg knife. It seems like the way you use your knife is very similar to how I use mine so your opinion carries weight with me. Thank you again!
Keep up the great work! Always love watching your videos!
PS: the audio was great!
The Bushcraft Padawan,
Just watching your 13 month review of the Garberg. I'm genuinely surprised that you haven't tried even in preference to the Garberg; the Taraava Jakaaripuukko 110. Under £70 delivered from direct from Finland.one of the hardest on the Rockwell scale, definitely worth a shout. Full tang and superb quality.
You won't regret it.
McMillans Bushcraft There are lots of finish knives that are really good. It's like one of their things. It's just Mora made a name for themselves outside, and built up production. I'm thinking about getting a slightly shorter blade, because the long blade actually takes more force to use.
Thanks for the info on the microbevel. Just ordered a Carbon today! Audio loud and clear. Funny jokes about your hands! 🤣 Enjoyed your video.
Hey Roger, thanks for watching and for the positive feedback, it's really appreciated.
I really hope you enjoy using the Garberg.
If you like the look of my channel and would like to see more then please consider subscribing 😁
Stay safe 👍
I did not read through all the comments, so I might say something that someone allready said. The mini bevel serve the same purpose as a mini bevel on an axe. It protects the edge from chipping and rolling. Shaving sharp or paper cutting sharp is great for precise carving but for most outdoor work not needed.
I own 10 Moraknv knives, 4 of them Woodcarving ones. Plenty other survival/military knives. Also have 65 Axes/Adzes. I do everything from felling to carving and mostly very hard woods since I live in South Africa which have the same type of wood then Australia.
As far as handles that cause pains...use pottery clay to shape a knife handle, then grip it so that it takes the shape of your grip. You can bake the clay if you want, but then you have a "image" of what your grip is and can shape your knive handles to that with knives/sandpaper etc.
You can do that for every handtool that you use for an extended time. I did it even on screwdrivers...no more blisters!
I have LOTS of Moras,well,i have ONLY Moras,simply because they in my mind are the best,loved this vid,and LOVE my Garberg,i have a stainless one...a bit harder to sharpen,but never any danger of it rusting...as soon as i got rid of that microbevel,this knife will forever be my fav...i simply love it so much!...new sub here!
Hi Vegard, thank you for sharing your own insights into the Garberg, I'm glad you're enjoying using it too.
The sub is much appreciated, 👍
Thank you for the very thorough and honest review. I love hearing from people who have a lot of time on something before they review it.
Hi Mark, thanks for the positive feedback on this video, it's really appreciated. I'm also not a fan of "out of the box" reviews either.
I hope you'll consider subscribing if you'd like to see more in the future.
@@TheBushcraftPadawan Done. Have a happy, healthy, and safe New Year.
In case of injury or whatever, you can use the pommel for one-handed ferro rod striking by basically sitting on the knife / clamping the handle with the backside of your knee.
When I first read your post I thought you said "clamping the handle with your backside or your knee"!!!!! 😂😂😂
Rereading it a second time made more sense, but was far less fun 😉
😅
Fusilier Vet here just re-entering the World of Bushcraft. I grew up doing the things I'm now relearning. Knives have come on a fair bit since my old bowie style blade as a teen but are basically the same. I was a keen outdoorsman & still am. We're now doing what countless generations of of forefathers did every day so I normally go for the kind of camp knife thats been proven for generations.. This time round I decided to try something a little different & bought an amazingly cheap Mora Companion. I find it a very good knife that I just couldnt get a spark off (until youtube gave me the answer. I ground down the spine & now have a decent spark with a ferrrel rod. The knife is ok but not quite long or wide enough for my taste. But for the price its great value. I have looked at both the Garberg and Kansbol but the only thing putting me off is the handle. I'm quite keen on wooden handles & may go down that route in the future. I have recently discoverd a veterans woodland retreat about 30 minutes away on the banks of the River Ribble that I can access any time i want along with other military veterans. I am about to continue the bushcraft journey I began nearly 45 years ago. I like your channel & your style btw. Keep em coming.
Hi K.D.S and many thanks for supporting my channel by taking the time to drop by, watch and comment, it's really appreciated.
I'm glad you're enjoying the channel and thank you for the positive feedback, cheers! Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
nice review Craig. I have never used or owned the the Mora Gargberg my self , but have used other Mora knifes which i enjoy using , so would be very tempted to try the full tang version, this may be a purchase in the future, as the saying goes " you can never have too many knifes" but for now imreasonly happy with current go to knife.
My go to knife that i use at the minute is a slight larger full tang blade that i made my self , which works surprisingly well for saying it was my first attempt. I normally accompany this with smaller caving knife like the 106 for finer carving work.
Exposed tang use - one handed firesteel striking. Pinch it behind your knee while kneeling, pull firesteel across tang over tinder. Not my idea, but a good one.
Hi Evan and thanks for watching and commenting it's really appreciated 👍.
I did use the exposed tang for some firelighting in this video
ua-cam.com/video/10KvmWx4wmI/v-deo.html
but not in the exact same way that you describe (it's an interesting idea though!)
Thanks again for dropping by my channel, if you'd like to see more and aren't yet a subscriber don't forget to hit that sub button 😀👍
In addition to all your precise assessments I wish it was about 10 millimetres longer. Got mine yesterday and removed the bloody micro bevel last night.
Let me know how you get on 👍
I think the Garberg is outstanding. If it was made by any company other than mora people wouldn’t have a negative say about it. But, because a knife maker known for budget blades (Mora) builds a top tier knife, it gets shunned. Can’t they make both? At $70-75 ish , it is not going to empty your wallet.
Hi Alex, it seems like you and I have very similar outlooks on knife selection 😉
Thanks for taking the time to drop by my channel, watch and comment, it's really appreciated 👍.
Don't forget to subscribe if you'd like to see more from my channel.
Such a gentleman. Keep up the great work!👍
Thank you for your kind feedback, I'm glad you enjoyed the video. Don't forget to subscribe if you haven't already 😁👍
Great video Craig, my first knife was the bushcraft black stainless, took a while to sharpen of the micro bevel off but once done it was razor sharp. I now have a Garberg stainless which I have yet to take the micro bevel off but fully intend to.
Hi Andrew and thanks for sharing your own bushcraft knife evolution, let me know how you get on with removing that micro bevel.
Fantastic review sir! The Garberg is the knife I have been planning to purchase since the carbon steel version was released. Thank you SO MUCH for explaining the micro bevel issue from the factory. My heart wouldve broken if I got the knife after waiting for so long and it wasnt razor sharp when I got it and tried it on a piece of paper immediately lol.
Brilliant and I appreciate your perspective and method of analysis very very much sir!
Hi AG Survival and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
I'll let you know when mine gets delivered tomorrow. I own a Mora HD too, and happy with it.
I hope you enjoy using it too 👍
I need to watch more of your videos, this is some really great information.
Hi Keith, be my guest!
Thanks for the feedback 👍
I absolutely LOVE my Garberg Black, not keen on the standard plastic belt holder but I am getting a custom leather sheath for sure...regarding the blisters, you need to use it more! hehe.
Hi Martin, yeah I definitely need to get out more!!! 😉
I am not sure if you upgrade your sheath yet. I got the plastic one too. What I did is add a Ferro rod and a tube to hold stuff. One on each edge. Then I wrapped it in #36 bank line. I love the set up. I am glade I went that way.
Hey brother about hot spot try to grab your handle with index and thumb with firm grip first...then the middle..ring..and pinky...way more confidence I’m grip...and helps prevent hot spots
Hi Nick D and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
Another good video. I own and use a Mora Companion and have found it everything you said. I’ve not bought a Garberg due to having other full tang knives. That said, I’ve wondered if there were any differences between the two and you answered that question very well. The areas that I tend to camp have a mix of foliage so the Companion is truly that. I carry a kukri or machete with the Companion (as well as a saw and occasionally I bring a hatchet or forest axe as well). I find that combination covers all the cutting needs I have when In the woods. Thank you again for posting this video and keep up the good work. I’ve enjoyed and learned from your videos.
Hi there and thank you was always for taking some time out of your day to drop by my little old channel, it's really appreciated.
Thank you also for sharing an insight into your own gear and rationale behind it. I was interested to hear that you utilise a machete and kukri, may I ask what part of the world you operate in?
The Bushcraft Padawan I live and usually camp in the southeastern USA. The reason for using a machete or kukri has to do with the vines and undergrowth in some of the areas where I camp (they’re great for clearing briars when cutting a trail or clearing a camping spot). This can be especially true on less frequented islands. I’ve also found the kukri to be a good substitute for a hatchet. I first learned of the kukri when I was in the military, the machete we called a “corn knife” and used for farming.
If you are carrying all that weight, perhaps a cordless chainsaw would be a good addition!!!😀😀😀
So good a review I had to subscribe to your UA-cam channel. 🔪
Waiting for my (two) Garberg, though not a Carbon, but the stainless ones.
I'm new into this with knives, so *a (real) review was of **_necessity_** to me.*
The sound is extremely good! Heard everything, no background disturbances.
I'll come back later when knowing better:
Thank you, Bushcraft Padawan! 👍👍👍👍👍 Loved this!
(I'm a Swede, not good in English, so, keeping this as short I can :)
Hi D. Lind and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
The micro bevel is to make the blade edge stronger
Thanks buddy, it's long gone now that I've sharpened and stropped it! Appreciate your input 👍
I can think of a real world situation where you would need to strike a ferro rod off the heel of the mora. If you have injured a hand/arm out in the field and only had 1 working hand you can hold the knife in the crook of your knee and light a fire 1 handed if needed and it’s a skill worth practicing just incase.
Also can be used for scraping the inside of say bark to process tinder.
Good suggestion David, thanks for sharing it.
Please consider subscribing if you'd like to see more from my channel in the future.
The micro bevel is there on many mora knifes, since reviewers complained about micro chips after abusing the knife.
Before that, they came shaving sharp.
The carving knifes still have a zero grind though.
Usually you can see the micro bevel with the naked eye. Especially on the garberg with dlc. That part is not black.
Excellent video Craig, very well done!
Glad you enjoyed it Daniel, thanks for the feedback.
Love my Mora Garberg Carbon
Good to hear!
Thanks for dropping by, don't forget to subscribe if you'd like to see more from my channel.
I recently used both of these knives on a course. We were issued a companion but I had a garberg of my own. The Garberg was much much much more powerful, especially for our Australian hardwoods. In that respect, I think it's much safer. That said, if you're backpacking and the knife is more of a fallback rather than a feature of your experience out there bushcrafting, the companion weights a fairly substantial amount less, especially with a polymer sheath. About ~135g difference. Doesn't sound like a lot I guess but it's close to the weight of a whole laplander saw.
Hi Dave, thank you for dropping by and providing your own insights and perspective on the Mora Garberg. It's really appreciated.
I have a habbit of buying knives all the time so mine will get a year of use and i have 3 new ones to try, but now im on a mora kick, ive got marttiini knives which i love!! got the great opinel 08 which is my lunch knife for work, and quite a few custom knives, the mora basic which has been great for little woodcarving jobs, now i just bought the mora garberg carbon with the farro rod attachment and a diamond sharpener , cant wait to try that out, with marttiinii and moras ive only needed a strop and compound though
Totally agree in regards to the sharpness. I thought it was a knife that had slipped through quality control as I have a few Moras that all came razor sharp.
The knife I use most often is the Mora Bushcraft Black and I just wish Mora would make that knife full tang.
Thanks for the info.
Hi George Dunn and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
The Garberg is a full tang version of the bushcraft black
A great review that's comes from experienced use thanks Craig
You're very welcome Steve, I hope you're keeping well?
Micro-bevel. Cool, I didn't know this. I am getting this knife from Amazon tomorrow, but mine in in stainless. I'll check for the micro-bevel. This video, although old at this time, has been very informative. All the bush craft/ survival knives I own have in one way or another have something that bothers me and I own a lot of them. I am thinking that this knife might be the closest to perfect for me. Thanks brother.
Thanks for the feedback on the video. I'm glad you enjoyed it and hope that you're getting to grips (no pun intended) with your new Garberg.
Please consider subscribing to my channel if you'd like to see more in the future.
Most knife makers put a micro bevel on their scandi grinds because it adds a little extra strength to the apex compared to a true v-grind scandi, it's a geometry thing.. Some people like it, some don't. It boils down to personal preference, and it will disappear the first time you sharpen it anyway, unless you deliberately put it back on..
I use my Garberg a lot. I used to use the Mora Bushcraft Black, which is another great knife, which cost about half of the Garberg. I wish I could have a Garberg with the Bushcraft Black handle..it's a more comfortable handle, at least for me, but I like the extra confidence that the full tang Garberg gives me for harder tasks. Either one is a great option though. Other than that, I'm a knife junkie, so I have quite a few different knives, and the Bark River Bushcrafter is probably my favorite for bushcraft or general wood craft. It isn't cheap though..it runs about $240 for a basic black micarta handle, and a fancy wood or other material options can put it close t or even above $300, so it definitely isn't for everyone. It's made of 3V steel, which holds an edge much longer, but it's also harder to sharpen, so not recommended for novice sharpeners. It's also a convex edge, so that adds even another difficulty to the task for beginners, so I would only recommend it for people who are very well experienced at sharpening.
Hi Timbo437 and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for sharing your own experience and insights.
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
Hi Craig! About 2 months ago I bought a Garberg (Stainless Steel) for my brother in law. It is his first bushcraft knife and he is absolutley happy. We already made a kydex sheath, because the multi-mount we get with the knife is .... not so good. :-)
I am acutally using a LTWK GNS with a scandi grind (also with a homemade kydex sheath) and it is my latest and probably my last knife I use. But we will see.... For the moment I am absolutley fine with it.
Thank you for your thoughts about the Garberg and have a nice week. By the way: I didn't noticed you got a new microphone. :-)
ATB André
Hi Andre and thanks as always for sharing your own insights, it's really appreciated.
I must admit that the park where I was recording was somewhat sheltered, so I'm hoping that I get more value from the microphone when I'm in more wide-open, windy areas.
A mora companion and pocket ref make superb gifts. Every guy should have these two items in their glove box or go-bag.
Hi joseph mathis and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
I live on the east coast of the United States in the foothills of Western North Carolina, I'd be happy to subscribe. Thanks for the reply ; )
Nice review, nice clip overall.
Allow me to give you a scenario in which you can and should (if you need a fire) use the but end of the knife to strike a ferro rod.
Hypothetically speaking you're out camping, you brake/dislocate/injure your dominant hand, you need fire for warmth/signal/comfort. You get some flamable materials, you get on your knees, put the tinder on the side of your knee (on the intact arm side), the knife in its sheath, put it in the back of the knee, tinder under it, scrape the fero one handed on the tinder. :p (yes i have seen it done and practiced it myself cuz i'm a hardcore lefthanded)
Hey Calin, thank you for dropping by my channel, it's really appreciated 👍.
That sounds like a great channel and one I'm going to attempt the next time I have an open fire in the woods.
If you like the look of my channel and aren't yet a subscriber it would be great if you'd consider hitting that subscribe button.
Stay safe.
I just received my first Mora Garberg... This knife is EPIC !!! Build quality is superior. The one thing I really like about this knife that no other knife has is that it has a short drop at the point allowing this knife to be extra strong. Other knife makers tend to make a false blade on top in taper it an inch back. This knife does not. The taper is less than 5 mm, which gives the knife a whole lot of strength up front. For 70 bucks this is the best knife there is... This is not an entry knife by any stretch of the imagination. Show me a better knife....
Enjoyed your video and how you point out the different parts of the knife. Keep the videos coming they look very good 👍👌 Gingdah
Been watching survival Bushcraft prepping survival videos for about 4 years. I enjoy this 1
You can get some Chicago screws to replace those lost rivets, and it will look less tacky that those zip-ties. Then you could use that sheath for another knife, or as a backup. Nice review and the Garberg is on my next to buy list for my kit. Also I have a cheap stainless Mora right now, and it's got that micro bevel that I need to remove after watching this video.
Nice and honest review , wish I would have seen this before I got my condor bushlore. Now I have a garberg & I wish I could go back a year and gone for the mora.
+Armando Mota Hi Armando Mota and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
Thank you for your review.
02:35 Behind you (7 o'clock) a rabbit wants to join your video. 😀
+TGNP Hi TGNP and many thanks for taking the time to drop by my channel, watch and comment - it's really appreciated.
Once the honeymoon was over for me I found the Garbergs edge to be to small for the thickness. The belly portion curves up way to fast for the thickness of the blade. This causes the belly to be to thick for thumb push cuts imho. Still overall it's a great survival bushcraft knife but for me I'd rather use the Bushcraft Black.
I've always wondered if the carbon edition has the same feel as my stainless. I've had identical knives in different steels feel very different before
The Garberg does have one of the best handles I've ever used, it gives you amazing power amd control.
Hi Airik's knife reviews and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
I own many moras and have to say they make great knives , I dont have the Garberg but recently got the orange bushcraft and fire steel very happy with it, and have beat the crap out of it and its solid as a rock in over a years use now . I have had many knives over the years and my 2 go to's are the openiel number 8 for food prep and the moras , Next purchase I think will be the Garberg , a great review. Oh and ref the rivets I would just take an awl push through some holes and sew it in tight right round with 1000 lb nylon sewing thread , I use that stuff all the time when i make pouches and sheaths etc strong as hell and a roll lasts forever.
My Garberg Carbon was exactly the same as yours, it was shockingly blunt (until I sharpened it) the reason it shocked me so bad was because of how sharp my companion was when it arrived and then I expected the upgrade to be even sharper. Anyway I am knew you knives and bush crafting and so I had to learn how to sharpen as well. Thankfully I had practice with my companion and that prepared me for the Garberg. Btw I live on the west coast of Scotland 🏴 and would love to join a bushcraft club but I don’t know where to look tbh. One more thing is that lots of people complain about the plastic handle, but I actually love it, it has a quality plastic feel (if you know what I mean 😂) I love it.
+Alexander Carder Hi Alexander Carder and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for sharing your experience of sharpening / using the Mora Garberg, cheers!
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
Just ordered my carbon Garberg and I’m looking forward to playing around with it. Should work as a pretty nice companion blade to the kukri I carry as my large blade.
I hope you enjoy using it as much as I do. Don't forget to subscribe if you'd like to see more from my channel.
Thanks for the 'micro bevel' information. I will remove it from my new Garberg.
You're very welcome. Please consider subscribing if you'd like to see more from my channel in the future.
Just sold me on this knife, order is made and thanks for the review!
Hi First Blood Bushcraft and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I hope the Garberg serves you as well as it has me. 👍
The Bushcraft Padawan - well I received the garberg carbon and it’s amazing, hair plucking sharp out of the box. Well worth the money and a big thanks for pointing me in the right direction. Cheers and stay safe. Vancouver Island.
Hey, best Review to the Garberg here on UA-cam, thanks a lot for that! Great Channel as well, absolutely love your honest way to make your videos.
All the best
Sven
What are your thoughts on stropping knives with scandi grinds? I’ve always stopped all my knives trying never to resharpen them unless they absolutely need be. But some knife producers say you should never strop scandi grinds because it rounds the grind over time instead of keeping the edge perfectly flat
I must admit that I've never really given it much thought if I'm being honest. I was taught to always strop after sharpening and as part of maintenance (by Paul Kirtley) so have always done it that way.
Love my mora companion, mora make great knives and for the money can’t be beat them in my opinion.
Glad you’ve found a knife happy place Craig! The mora BCB was my first and only “bushcraft” knife for over 2yrs. Recently upgraded to a Broc Horseman. Reason for the upgrade wasn’t due to dissatisfaction with the BCB, it’s a great knife and I love it still. But the horseman is for most of my camps completely doing away with the need for an axe. As a general rule, if it’s wood of a dimension you’d tackle with a Laplander, then you can comfortably and easily process it all the way down to feathers. The horseman is heavier than my BCB, it’s true. But significantly lighter than BCB + Hultafors classic
G'day and almost happy new year to you in the UK. I enjoyed your video alot, it was honest and imformative. I'm stoked to hear that you're happy with your Garberg, I could take an educated guess as to what the other knife may be and I could understand why you would have troubles with it. Stainless has it's advantages but is so much harder to sharpen..
Now, in regards to your questions at the end I'd like to share my answers. I grew up in Yorkshire, but left around 10 years ago and have lived mainly in Austrilasia ( South east Asia, Australia, Japan, The Phillipines, New Zealand to give a general geographic area. ). I was ' bushcrafting ' in the UK before I left and had the Mora's and usually a Laplander or an Axe for heavy work and this worked great. However, after leaving, I discovered the Malay Parang and I tell you, it changed things for me in a big way. Parangs are so effective in the areas that I've lived that I've done away with the Laplanders or Silky, I never carry an axe and all I ever carry are my Duku Chandong Parang and a small cheap Mora. At current I have the bushcraft black but it hardly does any work. The Parang is my go to 97% of the time. So I really have no reason to buy an expensive knife. Anyways, what I'm saying is, before you think about throwing more money at another knife, look at Parangs...
Regards
Hi Matthew Batison and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
I too have spent a little time in jungle and tropical regions and fully agree with your observation around using the right tool for the job/area 👍👍👍
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
Superb knife own the same one. Just bought a Casstrom no10 swedish forest knife. Recommend it to (more traditional nice look) thx for the clear video!
Hi Jordy and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback as well as sharing your own setup, cheers!
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
Great review Craig! Thanks brother!
Hey fella, long time no speak! I'm glad you enjoyed the video, thanks for taking the time to watch and comment it's really appreciated 👍
I've never bought a garberg, the looks put me off, I do have a bushcraft black but like you I have never had real confidence in hard use due to the partial tang so I treated myself to the R.M. Woodlore Pro which came sharper than any other knife I've ever bought. Full tang with a 5mm distal taper it handles anything I can throw at it. If there is one thing I would change its the leather sheath. The blade is 01 tool steel and will rust if left wet , a sheath like Fallkniven make would give me more confidence in bad weather, but I could say the same for my Adventure Sworn or Bayleyknife.
Hi Howard, thanks for sharing your own insights and experience in this area.
Much appreciated 👍
Thanks for the video👍.Going to order this soon just not sure if I should go for the leather or multi mount sheath.
Hi John Regan and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
Hello there never noticed any difference in sound but that could be down to me.
To the knife subject I have the mora companion hd and I find this does everything thing I need I did have to grind the spine to put a edge on for a fire steel but for a £10 knife it does the job the only thing I would change is the sheath as I now starting to crack thanks for the video 😎😎
Hi stephen oglesby and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the feedback on the audio, cheers!
Excellent review!
+Keith Hi Keith and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
I use my garberg to strike my fires on the pummel ONLY. Another muscle memory but no marring on the blade itself.. other than batoning! 😝😝😝
Good review.
+Paul Smith Hi Paul Smith and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
im trying to decide between the stainless and the carbon advise please ! i aleeady have a bushcraft black in carbon and a kansbol in ss
I too have a Companion, take it on every fishing trip, its ace.
It's TBS, innit?
I couldn't possibly say! 😉
As soon as you started talking about your previous knife I was thinking TBS...😆 great video dude!
I ordered one and am expecting its delivery today. I have a tops brakimo and love it.
Hey Scott, I hope you've received your Garberg by now. How are you getting on with it?
Unfortunately I've been working so much that I haven't made it out to play with it yet. Hopefully I'll get out soon
I was considering this knife for some time. However, the fact it has a micro-bevel is a turn-off for me. So it is off my list. I do not want to have to sharpen a knife right out of the box.
Great review keep up the good work Craig
Hi Mike Krzyzkowski and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
Thanks for that man,,Great Video
Hi Scott Pancher and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
Very in depth opinion piece, after lots of thought. Only thing I don't get was your comment about the protective coating. I'm not sure how you sharpen it, but that whole flat edge without coating is what should lay on the stone, right? I mean that flat edge makes it easy to find the angle. So if the put a coat on it, it could gum up the stone, but more importantly it would come off the first time you sharpen it. So what would the point be? A hollow ground may keep the coat longer, but not a Scandinavian grind.
I suspect you're putting your own bevel?
Btw, I tried the companion for a short while. Found the blade good, until someone stole it from our site. I kinda grew up with hollow grinds though, so I may replace it, but I camp and hunt, and am not really into "bushcraft", so I'm in no hurry.
If you had to make the purchase again would you still get the leather sheath given the malfunction, or get the plastic multi-use as it straps to Molly plus belt loop. Thank you! Great video!
Hi Tony, I hope you're keeping well? Despite the flaw, I would still purchase the leather sheath, however I'd probably replace the pop rivets with cable ties immediately (as they're still holding strong).
Stay safe 👍
The Bushcraft Padawan Advice taken. Thank you!
You're very welcome.
I would prefer if they would make a 5 inch Garberg with micarta handles.
Why is that?
@@TheBushcraftPadawan I prefer a longer blade and like micarta handles, like the handles on my ESEE 4.
I actually really enjoyed watching this I used my mates stainless version & hated it.
However I think that's because I'm not a fan of stainless so I'm going to buy the carbon version after watching this
I hope you are well Craig your channel is getting better & better 😊
Hi Lee and many thanks for taking the time to drop by my channel, watch and comment - it's really appreciated.
Good luck with the Garberg Carbon. This is quite an old video but I'm very happy to report that I'm still using mine (as recently as last night to process some hand drill spindles) and remain a big fan!
Don't forget to subscribe and hit that notification bell if you haven't already.
Did you buy one and like it?
I no longer use my stainless version, the knife feels to thick around the belly area imo.
I'm trying to decide which version to get why did u hate the stainless version ? do u like your carbon better ? and why ? thanks
I assume you are talking about the TBS Boar, I have hear quite a few people complain about it. The company seem goad though.
Hi Shelley Raskin, it was indeed a TBS knife I was referring to (can't remember the specific model though). The Bushcraft Store were very good at organising an exchange for me though, so full kudos to them on that front.
Do please consider subscribing if you'd like to see more from my channel.
Great job! -Stephen, Ohio U.S.A.
Thank you Stephen, I really appreciate your feedback and taking time out of your weekend to watch and comment.
If you're not yet a subscriber it would be great if you'd consider becoming one in the future, have a great week 👍
I'm about to order one from the US. Did you have any problems ordering this or using it outside as the blade length is illegal in the UK ?
Hi there and thanks for dropping by. The blade length isn't the issue as such, it's the blade length + where you're carrying it / using it that can catch you out.
@@CraigTaylor74 Thanks for the quick response. I know you need a good reason for carrying, just curious if you had any awkward run ins and what happened. Cheers mate, great review.
Sir, very much enjoyed this video! I enjoy all of your videos, but as you said as well, this one was different. Keep'em coming!!
Hi A. Todd Moore and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video (albeit it a slightly different subject) and thank you for the positive feedback, cheers!
Very nicely done.
Hey Snowman, thanks for watching and commenting it's really appreciated 👍.
I'm glad you enjoyed the video and hope you found it useful? If you did, if would be great if you'd consider subscribing to my channel so you don't miss any future videos.
Great video and review!
Thank you Ralph, I'm glad you enjoyed the video and thank you for the kind feedback, it's really appreciated.
I'm not sure if you're a subscriber or not, but if you're not it would be great if you could check out the rest of my channel and if you like what you see, perhaps you could consider becoming one?
Have a great week!👍
Very good, Thank you very much
Glad you enjoyed it Thomas, thanks for watching 👍
I love the mora carbon garberg....but I had all the same problems, lost a rivet 2 days after I received it, as for the coating and micro beveled edge, it was some work to correct it
Hi Jay and thanks for watching and commenting it's really appreciated.
It's interesting to hear that somebody else has had a problem with the sheath rivets, did you contact the retailer for a replacement?
If you're not yet a subscriber and like the look of my channel it would be great if you could consider hitting that subscribe button so you don't miss out on any future videos 👍.
@@TheBushcraftPadawan I didn't send it back, I just went to the hardware store purchased a new fastener.
I too bought a nameless knife, so I had to wait awhile before I got the Garberg and was not going to let it out of my hot little hands :)
Subscribed
@@jaybaughn8090 You're a 🌟, thank you 👍
Has Mora fixed these issues ?
I'm unsure Mark, I'm still using the cable ties sheath and it's holding up well.
Thanks for dropping by and commenting it's really appreciated.
Don't forget to subscribe if you'd like to see more from my channel 👍
Great review brother!!
Hi Garland Thomson and many thanks for taking the time to drop by my channel, watch and comment, it's really appreciated.
I'm glad you enjoyed the video and thank you for the positive feedback, cheers!
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
thank you it was very helpful!!
You're very welcome Julius, thanks for dropping by my channel, watching and commenting it's really appreciated.
If you like the look of my channel and would like to see more then please consider subscribing 👍
The Bushcraft Padawan thanks, I’ve joined to your channel. Did you try the Mora Kansbol? One of my friends Kansbol’s point has been bent while carving a spoon and mine has started to rust at the choil despite it is a stainless steel blade. It seems to me that the Garberg is much more durable and your experience has reinforced my opinion.
Hi Julian, it's good to hear from you I hope you're keeping well?
I've no experience of using the Kansbol I'm afraid, but am still loving the Garberg.
If you lost the Garberg, would you buy it again? Great review Craig
Good question and absolutely I would but it again, no doubt whatsoever.
The Bushcraft Padawan thank you Craig. Top lad
Here’s my list of Moras. Companion and HD version, 120 wood carver and the wood carving basic, Kansbol, Eldris, and Garberg Carbon. It’s like I just have to have all of them, silly me 😜
+Alexander Carder Hi Alexander Carder and many thanks as always for supporting my channel by taking the time to drop by, watch and comment, it's really appreciated.
Don't forget to subscribe if you haven't already, I'd really appreciate it, cheers! 👍
From what i can tell the Garberg is an all around go to knife. I might just have to get one .. J
The hilt edge is useful for fine shavings
Mora better step up their game. After using the jakkari puukko 110, and the quality and price has just crushed Mora. The garberg is over priced and needs a steel upgrade. I just dont see how mora will compete.
Thanks Joshua, I appreciate you watching and commenting. I'm hearing more and more people mention the Jaakari Puuko, one to keep an eye one in the future!
The jaakaripuukko doesn't always come with good quality. Lots of complaints on the bevels being off etc. But the sheaths are good.
@@JordanMac79 Sheath also is cheap thin leather. It gets damaged really easy if you hit branches etc as you walk into the woods.
Jakkari puukko 110 is hardened at 59 and that steel holds it's edge a bit longer but it also takes much more to take an edge, while the Moras, can become scary sharp in a couple of minutes. Also the apex and the edge, is the worst I had on any knife, whle on Moras are always the best I had on any scandi knife. The handle ergos also make my hand hurt, after a couple of minutes of use, while any of my Moras has exellent ergos and thick enough handles. Also the leather on the sheath. is much better quality on the Mora! That being said, Garberg is more expensive than it should be, but also, Jaakari Puukko's only advantage, is a bit more edge retention.
Perhaps the micro bevel was to maintain the protective coating of the blade
Supposed to make the edge sturdier for batoning people said...I can't see how...😂
@@tikkidaddy it adds a different bevel angle. A true scandi is thinner behind the edge, which does make it cut into the wood better, but also makes it easier to chip or roll. It's not a huge difference, but it is there none the less..it's all a geometry thing. A wider bevel angle makes it less fragile, but also reduces the efficiency of the way in which it digs into the wood. Most experienced bushcrafters prefer the true v-grind scandi, with no micro bevel.