Hightadustable and turnable arm, Temperatur, and many other things.... Höhenverstellbarer Arm, Drehbarer Arm, Deine Werkzeuge zum direkt einsetzen in das Gerät, z.B. wie an einem Schweißtisch über Bolzen (welding table), Temperaturkontrolle, vergrößerbare Arbeitsfläche, Beleuchtung an der Spitze, evtl. ein laser wie bei einer Kappsäge, Luftabsaugung (für die Dämpfe)....
I love the jigs you make for this cutter the guider Pro has long replaced the factory fence. I would suggest to find a way to put the guide on and have a way to lock it down I use a paper towel to make the fit tighter so the precure does not move the guide back
Hello Gerard, found you first at tabletop basement TV, but love your Videos, Tutorials and tipps! Merry christmas to you and your beloved people. Stay healthy Michael from Saarbrücken, Germany.
great vid m8, just liked and subscribed... looking to get my very first proxxen machine and came here for some much needed valuable info...didnt even know what a guider was lol, such a noob, cheers tho..
Is het nog van belang hoe strak de draad is? Met een blok snijden gaat het prima, maar ik merk dat als ik bv de pilaar tool gebruik, dat het heel lastig is om de uitsteeksels precies te volgen. Of is dat gewoon kwestie van vaak doen en wordt je er vanzelf handiger in?
Thanks for the vids Gerard, its whether you know tips like these ones that can make or break your enjoyment of this hobby especially if you are time poor and are unable to experiment to find out what may be wrong with the machine or the technique you use. Thanks for sharing and I'm really looking forward to the next vids, Merry Christmas!
On my Proxxon thermocut there is a sticker on the dial whit numbers painted in white, so it is easy to set the temp, probably they added it on newer batches.
We really need an open source alternative to this tool. It's ridiculously overpriced and proxxon don't improve the design over the years. The community need to create its own alternative to the proxxon.
great video. Very good explanation of the basics. Thanks very much
Great Series Gerard. Your fences are superb.
Gerard, I'd be first in line if you designed a better hotwire table compatible with all your tools. Maybe a kickstarter?
Second☝🏻
Hightadustable and turnable arm,
Temperatur, and many other things....
Höhenverstellbarer Arm,
Drehbarer Arm,
Deine Werkzeuge zum direkt einsetzen in das Gerät, z.B. wie an einem Schweißtisch über Bolzen (welding table), Temperaturkontrolle,
vergrößerbare Arbeitsfläche, Beleuchtung an der Spitze, evtl. ein laser wie bei einer Kappsäge, Luftabsaugung (für die Dämpfe)....
I liked and subscribed. I’m happy with the tips again and yes, my wire went bzzzzzzzzz when I took the tape off.
Dir und deinen Lieben ein Frohes und Besinnliches Weihnachtsfest und ein Tolles 2023.
Gruß Detlef
Excellent primer, Gerard. Nicely done
Great tips, great viedos
Another very informative video, Gerard! I've had my Proxxon for a good few years now and it is such a great tool.
I love the jigs you make for this cutter the guider Pro has long replaced the factory fence. I would suggest to find a way to put the guide on and have a way to lock it down I use a paper towel to make the fit tighter so the precure does not move the guide back
If foam gunk builds up in the little hole, you can also just put a few drops of acetone in there to clean it out.
Hello Gerard, found you first at tabletop basement TV, but love your Videos, Tutorials and tipps!
Merry christmas to you and your beloved people.
Stay healthy
Michael from Saarbrücken, Germany.
I hope someone from Proxxon is watching..........
Hello Gerard, Thanks for the video!
Merry Christmas to you and your family🎄
great vid m8, just liked and subscribed... looking to get my very first proxxen machine and came here for some much needed valuable info...didnt even know what a guider was lol, such a noob, cheers tho..
Disculpa vivo en Colombia está cortadora se consigue acá en Colombia junto con las plantillas?
Nice GERARD! Fijne feestdagen, je ter apel maat!
Do you think you could make a video explaining how to use Tool No. 5? I nearly bought it today but was cautious bc I’m not sure what all it can do.
Only in german, but I hope it helps anyway :
ua-cam.com/video/bNcWjjuHx8I/v-deo.html
Is het nog van belang hoe strak de draad is? Met een blok snijden gaat het prima, maar ik merk dat als ik bv de pilaar tool gebruik, dat het heel lastig is om de uitsteeksels precies te volgen. Of is dat gewoon kwestie van vaak doen en wordt je er vanzelf handiger in?
Thanks for the vids Gerard, its whether you know tips like these ones that can make or break your enjoyment of this hobby especially if you are time poor and are unable to experiment to find out what may be wrong with the machine or the technique you use. Thanks for sharing and I'm really looking forward to the next vids, Merry Christmas!
On my Proxxon thermocut there is a sticker on the dial whit numbers painted in white, so it is easy to set the temp, probably they added it on newer batches.
yes I can imagine they done so. Certain I am not the only one that has a hard time reding these numbers.
@@Shiftinglands The angle of the wire on the side is slightly off on my though, I noticed after watching your video, probably the arm is bent :(.
We really need an open source alternative to this tool. It's ridiculously overpriced and proxxon don't improve the design over the years. The community need to create its own alternative to the proxxon.
Surely we can bribe some electrical engineering students or design students to tinker with this idea...
Does this have the regular plug for USA