how to change front brake pad on Toyota 4runner
Вставка
- Опубліковано 26 сер 2024
- This is showing you guys out there that thought changing your car's brake pads is very difficult. it might be true for some guys who had never gotten their hands dirty to do it. this was my first time to do a brake job for 4runner and I can do it too. I just want to help some guys who didn't have much money to let mechanics do the job. hope this video can help them and save their money.
this is all items that I choose
Toyota 4RUNNER brake pads amzn.to/3rTkxsu
toyota 4runner oem brake pads amzn.to/3lHYLa8
brake tool to press 4 piston amzn.to/3A9yky3
socket set 1/2 long amzn.to/3AbVqUY
jack floor amzn.to/37k0Dh1
sony A7c camera amzn.to/3yCLwvj
Safety first!!! First thing before removing the tire, place jackstand under vehicle🤔
He's just loosening the lugs, that tire isnt going anywhere
Very nice camera angle on the brake pad. Thank you for showing how!
Thank you, this video is very helpful. May God keep you and your love ones, very blessed.
You made that look extremely easy I guess I’ll be doing mine
Thank you very much!!! Your video was a huge help. 15 min brake job!!!
Mahalo braddah!🤙 did my breaks and everything went perfect. Thanks for the guidance . Aloha
Great video. Don’t forget to lube the pins.
Thanks for making the video, helped me out a lot!
Just changed out my brake pads today, thanks to this video. It was very helpful. Thanks for taking the time to make it.
I did it the hard way I took the caliper apart 😭 first time ever working on calipers like that
did you have jacks stands? pretty dangerous without Jacks stands
Great video bro appreciate it 💯✅
Thanks man. Good video
WHEN I get one-- I want to FIRST--- do a POWER STOP brake system upgrade. I've heard too many say the brakes aren't the best on these...
Thanks for the video, it was very helpful.
You’re welcome.
Good job man! Thanks or the video
You’re welcome
Good video
Sure it isnt 21mm?
I don't know too. However, my brother's car is a 22mm like the video showed you.
No cleaning….no lubing…..????
All that grease on those on those new brake pads. Wtf
It's not grease, its black overspray from the plates.
Hey did you end up using the "brake tool to press 4 piston" linked in the description? Skimmed the video twice and never saw it used
You put the anti rattle clip on backwards
😬
😬
. What is wrong
@@neverfinding2703he didn’t clean anything - he added a second shim plate for no reason, I bet there’s rubbing - he didn’t line the pins - he used a screwdriver against the rotors, and he’s keeping the rotors - he didn’t even seat the right side of the rattle clip..
that’s just a few notes from one pass through the video.
Will they work? Sure..
Is it right…?
Yea...you had an impact. Jack the car up first. Get it secured....then take the lugs off. If using a breaker bar you loosen the nuts slightly then lift it up. Do not do it the way this kid did. Very unsafe!
You are damaging your rotors that way.
How so? Curious so I don't do the same thing.
@@ellenmarie2079 using a screwdriver against the rotor to push the pistons back. Better to use the old pad and the pliers to push them in.
Dawg what ate you sayin
@@ellenmarie2079 in some cases prying against the rotor like that you could leave dents,cuts, or marks from the screw driver. If you were doing rotors then you don't need to worry about it because obviously you will have new rotors. But you were very careful you will be good. Also new pads with old rotors tend to wear weird on some cases, I've always either replaced rotors or turned them on a brake lay. But awesome video!
I had a tire fall off and took like 4 inches off of one side of my rotor from grinding on the concrete. Got everything back together and drove it the rest of the day like that. Would have never known anything was wrong it you didn’t see it. I promise you a tiny dent from a screw driver isnt going to hurt anything