Hope you have a change of heart regarding leaving UA-cam. I love watching you and Brandon. Both of you are very down to earth in your delivery. So many UA-camr’s like ‘act up’ and do stupid stuff. I dropped one of your UA-cam buddies. To self serving for me. Anyway keep at it and I’ll keep watching.
@N2MYGT hi, watching your channel here in Brazil, I have a s650 gt performance, and my project is very similar to yours, despite the difficulty in importing the parts and the high taxes charged, I have already managed to install whipple stage 2, kooks long tube, open air box, 20-inch wheels and tires, jlt oil separator in my car, in the next step I will do a suspension, in the end a project similar to yours!!! Congratulations on the car and the UA-cam channel, keep going!!
Can't wait to watch your Whipple journey man! We may end up going through it at the same time if your install is in April! Although, I'm going Stage 1 until the warranty on the DH is up then there is an upgrade kit that will go Stage 1 > Stage 2. I need to look up Oil Pump Gears as that is not something I have thought about.
I enjoy watching you and your son’s Chanel’s 👍🏻 it gives me Inspiration to keep enjoying my 2022 GT500 .I don’t post my car on Instagram or Facebook or go to mustang events because here in the San Francisco Bay Area they will target your car and steal it .Sadly it vary hard to share the car with other so I’m kinda a lone wolf just enjoying Everyone’s mustang here on UA-cam thanks 😊
Always a bittersweet feeling selling a vehicle you’ve had for a long time. Especially when you’ve build it over years, it represents a chapter of your life. I’m going through the exact situation now, payed off my fiesta st and I’m ready for a mustang gt. Every time I think of selling the fiesta, I come to conclusion I don’t think I could part with it. At least not yet. But I will get a mustang, any reason you skipped over the s550? Looking forward to the build on wasp!
I hope you have a change of heart about the videos. I think we are a lot alike with our hobbies and age. I love my 2016 GTPP and have done most of what you did for part 1 suspension wise + cold air kit, tuned and a custom stereo with a single 10 in it. Not many miles and my wifes thinks I am just wasting money on it but I love driving it when I can. I only have 12k miles on it. I only tend to drive it locally so no chance to really put miles on it (I have a 21 tesla MYP to travel in and this is also fun to drive since it has so much torque). I hear ya on the h-pipe. I don't like the raspiness of the x-pipe. I wish it sounded more like one of my old foxbodies with an offroad h-pipe and flowmasters but oh well. I have been contemplating getting an SC of some type so I am looking forward to your install.
I have an S650 MT with active exhaust and it also ran 417 on the dyno when it was OEM. Sounds like we both got a car that they made on a Tuesday. My build is pretty close to what your doing, too. People tell me I'm dumb for building this car instead of buying a C7 Z06. It was a tough call, but at the end of the day I want what I want. I tell people I don't care how they spend their money but they don't get to spend mine.
Joel, I have a s550 PP1, I replaced my center gauge cluster with a cluster from the eco-boost and everything works great. I don’t know if this is still the same with the s650’s, but I would assume it is. Good luck.
@ I wouldn’t say you lost your mind lol. You did about all you could do to it, kinda like you raised it from a child and now it has moved on. I can’t wait to see all that you do with Wasp, you have good taste and do things right the first time, glad you share the build with us.
@N2MYGT it's pretty much double the price for anything. My whipple cost me around 19k usd here in the UK. I'm gonna go on hols to florida anyway this year with the kids etc and bring back a whipple in my luggage to avoid all the taxes 🤣😅 The small wins my man you know how it is with a family dynamic
Joel, you taked about adding a boost gauge. My car is procharged, could I add a boost gauge on that? Lol I'm not familiar with it, but like you, id like to see how much boost I'm pushing.
@N2MYGT lol, I looked it up and basically all I THINK???? I have to do is find the vacuum line coming off the procharger and run it to the device. Lol that's what I gathered from American Muscle installation manual for the Raxion kit
@@11B_GRUNT The problem that I am having is because everything is digital in the new cars so I don't know where to put a boost gauge without tearing something up. I might analyze it for a little while and see if I could come up with some custom fix for it
Thanks for pointing that out! The guy I got to put it on must have done it wrong and it's been like that for over a year. I will put it on my things to do list.
@@N2MYGT I can tell that you’re very particular about your cars. I’m the same way. That’s the only reason I mentioned it lol. Car looks great and it’ll be a beast once you get all the other stuff installed. 👍🏻
Hope you have a change of heart regarding leaving UA-cam. I love watching you and Brandon. Both of you are very down to earth in your delivery. So many UA-camr’s like ‘act up’ and do stupid stuff. I dropped one of your UA-cam buddies. To self serving for me. Anyway keep at it and I’ll keep watching.
Thank you for that we shall see how things work itself out
Excited to see the build. I understand if you’re tired of the UA-cam thing, but you still have a good handful of us that still watch.
I appreciate your support for real
@N2MYGT hi, watching your channel here in Brazil, I have a s650 gt performance, and my project is very similar to yours, despite the difficulty in importing the parts and the high taxes charged, I have already managed to install whipple stage 2, kooks long tube, open air box, 20-inch wheels and tires, jlt oil separator in my car, in the next step I will do a suspension, in the end a project similar to yours!!! Congratulations on the car and the UA-cam channel, keep going!!
It's kind of cool I got people watching me from over there. Definitely appreciate it
I promise I won’t make it ugly!
I'm sure you won't
It’s all about being happy, keep doing you. Keep the content coming.
Thanks
Looking forward to watching the build!
Looking forward to filming it for you
Sweet!!! Awesome list 😎. And I know what you mean about the anxiety!
Right
Can't wait to watch your Whipple journey man! We may end up going through it at the same time if your install is in April! Although, I'm going Stage 1 until the warranty on the DH is up then there is an upgrade kit that will go Stage 1 > Stage 2. I need to look up Oil Pump Gears as that is not something I have thought about.
You and me both
Projekt WASP super czekam na kolejne video pozdrawiam 😊
Thank you
Is going to be a great build 👍👍
Hope so
I enjoy watching you and your son’s Chanel’s 👍🏻 it gives me Inspiration to keep enjoying my 2022 GT500 .I don’t post my car on Instagram or Facebook or go to mustang events because here in the San Francisco Bay Area they will target your car and steal it .Sadly it vary hard to share the car with other so I’m kinda a lone wolf just enjoying Everyone’s mustang here on UA-cam thanks 😊
That’s a bummer that you can’t enjoy it like that. Hopefully, the area gets better.
Always a bittersweet feeling selling a vehicle you’ve had for a long time. Especially when you’ve build it over years, it represents a chapter of your life. I’m going through the exact situation now, payed off my fiesta st and I’m ready for a mustang gt. Every time I think of selling the fiesta, I come to conclusion I don’t think I could part with it. At least not yet. But I will get a mustang, any reason you skipped over the s550? Looking forward to the build on wasp!
My son has a s550 so i jumped
I hope you have a change of heart about the videos. I think we are a lot alike with our hobbies and age. I love my 2016 GTPP and have done most of what you did for part 1 suspension wise + cold air kit, tuned and a custom stereo with a single 10 in it. Not many miles and my wifes thinks I am just wasting money on it but I love driving it when I can. I only have 12k miles on it. I only tend to drive it locally so no chance to really put miles on it (I have a 21 tesla MYP to travel in and this is also fun to drive since it has so much torque). I hear ya on the h-pipe. I don't like the raspiness of the x-pipe. I wish it sounded more like one of my old foxbodies with an offroad h-pipe and flowmasters but oh well. I have been contemplating getting an SC of some type so I am looking forward to your install.
We shall see where this road will lead us
I have an S650 MT with active exhaust and it also ran 417 on the dyno when it was OEM. Sounds like we both got a car that they made on a Tuesday. My build is pretty close to what your doing, too. People tell me I'm dumb for building this car instead of buying a C7 Z06. It was a tough call, but at the end of the day I want what I want. I tell people I don't care how they spend their money but they don't get to spend mine.
People do act like that for sure
Letsss gooo bad azzzz vid !!!!!!!!
Thanks
Joel, I have a s550 PP1, I replaced my center gauge cluster with a cluster from the eco-boost and everything works great. I don’t know if this is still the same with the s650’s, but I would assume it is. Good luck.
The 24's change totally to digital dashes so there is none of that going on in the middle
Joel can you get me info on the shift knob, I’d like to get …👍🏻✌🏻
You still got the jack rails on it?
I still think your crazy for selling that thing, may of been one of the cleanest S197’s around.
I know it seems that way. A lot of things people don't see in the background so I will let you assume that I am crazy and lost my mind.
@ I wouldn’t say you lost your mind lol. You did about all you could do to it, kinda like you raised it from a child and now it has moved on. I can’t wait to see all that you do with Wasp, you have good taste and do things right the first time, glad you share the build with us.
A whippled s650 with a manual is going to be so nice. Enjoy!
Thanks! Can't wait!
so im looking at the S650 now in place of my S550 ive just sold- im thinking a similar build / look - only issues the cost in the UK sucks
Is it that bad over there?
@N2MYGT it's pretty much double the price for anything. My whipple cost me around 19k usd here in the UK.
I'm gonna go on hols to florida anyway this year with the kids etc and bring back a whipple in my luggage to avoid all the taxes 🤣😅
The small wins my man you know how it is with a family dynamic
Joel, you taked about adding a boost gauge. My car is procharged, could I add a boost gauge on that? Lol I'm not familiar with it, but like you, id like to see how much boost I'm pushing.
Trying to figure that out myself. If I can figure out a way then I will let you know cuz it should all be the same
@N2MYGT lol, I looked it up and basically all I THINK???? I have to do is find the vacuum line coming off the procharger and run it to the device. Lol that's what I gathered from American Muscle installation manual for the Raxion kit
@@11B_GRUNT The problem that I am having is because everything is digital in the new cars so I don't know where to put a boost gauge without tearing something up. I might analyze it for a little while and see if I could come up with some custom fix for it
@N2MYGT the one I looked up was the Raxiom and it just installs into your air vent. Wire go through firewall and connects to procharger/supercharger.
14 weeks? How is that March or April? Isn’t that like 3.5 months? Maybe May or June-ish?
Yeah probably my math wasn't mathing. We can all hope right
Like wasp Joel i haven’t seen many yellow mustangs.
There's a few out here but that is mean if you pick it up
Just stopping in to say you have your camber plates installed wrong. That plate on the top of your strut towers is supposed to go below it.
Thanks for pointing that out! The guy I got to put it on must have done it wrong and it's been like that for over a year. I will put it on my things to do list.
Thanks again for that catch. It's been over a year that it's been like that and it was a line that way. We will get that corrected shortly
@@N2MYGT I can tell that you’re very particular about your cars. I’m the same way. That’s the only reason I mentioned it lol. Car looks great and it’ll be a beast once you get all the other stuff installed. 👍🏻
@@bpfishing19 Thanks again
Wish you’d be different and run the Roush / Magnuson kit
I never liked the sound of a roush exhaust. That's just my opinion for me.
@@N2MYGTI was referring to the supercharger
better put the beefier rear axel in it.
It is in my list of other stuff but I'm not going to be running radial .
Time for boost
Sooner or later
(⊙ _ ⊙ )
Stay Tuned
First
hello