FUEL PUMP REPLACEMENT ON MAZDA 3

Поділитися
Вставка
  • Опубліковано 12 вер 2024
  • In this video, we are going to detect and solve the rough idling issue caused by a bad fuel pump on a Mazda 3. If you are having issues with your 04-09 Mazda 3, this video could help you to fix it on your own.
    Special thanks to Weston Heisey from Pueblo Small Engine Repair for fixing this problem. Make sure to check out his repair shop using the links below to contact him regarding repairs or maintenance on any particular engine.
    pueblosmalleng...
    pueblosmallengine@gmail.com

КОМЕНТАРІ • 15

  • @nimavnv6447
    @nimavnv6447 9 місяців тому +1

    Exactly what I needed, Thank you

    • @navidsh8195
      @navidsh8195  9 місяців тому

      Glad it helped! Thank you for your feedback!

  • @oscaryanez8680
    @oscaryanez8680 4 місяці тому

    Friend, I see that the old pump you had has a tab that sits on top of the tank, that can be seen, and the new one that you put in is even with the rubber without protruding tabs. In other words, it doesn't sit on top of the tank.???

  • @dannyb5863
    @dannyb5863 6 місяців тому +1

    I just cut a square hole on my speed 3 when my fuel pump failed…….just fabricated a sheet metal cover with short self tapping screws when I was done to cover it back up……..wasn’t about to drop my tank after I had just filled it all up…….

    • @oscaryanez8680
      @oscaryanez8680 4 місяці тому

      Did you remove all the gasoline from the tank before digging the hole or did you remove the pump with everything and a full tank.? Its no dangerous?

    • @dannyb5863
      @dannyb5863 4 місяці тому

      @@oscaryanez8680 na I didn’t remove any gas. I just cut very carefully and removed the pump and installed the new one. I put some sheetmetal over the hole I cut. Simple.

    • @Icepressa
      @Icepressa 3 місяці тому

      @@dannyb5863did you weld it in? That must be super unsafe to do, I’d just bolt it in! What a stupid design in my BMW I pull up the seat and I can replace the pump within 15 minutes!,

    • @dannyb5863
      @dannyb5863 3 місяці тому

      @@Icepressa na no welding. It’s to close to the fuel tank to weld. Just cutting and drill some holes for the sheet metal after you put it in the pump. Just drilling the holes carefully so you don’t puncture the fuel tank.

  • @alvinaquino2841
    @alvinaquino2841 6 місяців тому +1

    how much is the fuel pump assembly for Mazda3 and where can i order ? thanks

    • @navidsh8195
      @navidsh8195  5 місяців тому

      Depending on your location, the part itself could cost around $200. Feel free to contact us for more info@ navid335@gmail.com

  • @mlamlilizo9342
    @mlamlilizo9342 8 місяців тому

    My mazda 3 , 2005 is giving me problems when you accelerate it doesn't pick up its lazy, it's got rough idling, it loses power when you accelerate

    • @navidsh8195
      @navidsh8195  8 місяців тому +1

      I had the same exact issue with mine. It could be so many different things. I recommend going through the entire air flow system, which includes checking MAF sensor, o2 sensors, airbox, and your throttle body. Also make sure your fuel system is working properly. Check fuel lines and fuel pump.
      Coils and spark plugs could be checked as well.

  • @Icepressa
    @Icepressa 3 місяці тому

    Stupidest design! Might be reliable but i still rather drive my BMW and pay $50
    More for the part and actually be able to install it within 10 minutes not the whole day 😂😂😂

  • @edmondpecotjr.8888
    @edmondpecotjr.8888 3 місяці тому

    umm..
    bahahhahhahaha

  • @bulldozer99
    @bulldozer99 2 місяці тому

    Hi guys guys guys guys guys guys guys guys guys guys guys guys...