Surprisingly useful technique! Tight gap pipe TIG welding process
Вставка
- Опубліковано 12 вер 2024
- For information on welding machines and peripherals, you can get more accurate answers by contacting the manufacturer.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
When welding stainless pipes, there are cases where welding is done in tight gaps for high production volume.
In this case, we will introduce a technique that can be useful.
In the future, we will also introduce the application to pipes of other sizes.
Thanks for watching and have a nice week.
#tight
#stainless
#pipe
#TIG
#welding
#test
#factory
#machine
#steel
#crafts
#tips
#secret
#trick
#amazing
#DIY
#idea
#future
#technology
#technique
#HAGOJIBI
#video
As usual good job. Show us overhead position technic root feeding please.
the job is perfect but usually there are no turn tables and you cannot rotate your pipe, can you show us how to make great root pass when the pipe is fixed in place? :D
No it's impossible.
cause he is a handyman Not a pipe weldsr at all
5g position also can be welded like that in narrow gap. X ray is passed.
6G would be better
I've used this same technique in the field, my root comes out more flush. Would work great to if you can get the whole plant to rotate for you.
Walking over the wire for the root pass is good. I always, from the beginning, fed the wire from the inside, so I didn't have to be concerned over suck back or lack of penetration. No failed x-rays, maybe a spot every now and then. Hey, I'm only human. But, to each their own.
Good job, looks good. Nice video. 👍
Espectacular trabajo maestro, no hay más palabras.👍🤓😜
Nice root, not all the welders can do that can of weld in the turn table. Good job.
Congratulations very good job 👏👏👍👍🔝🔝🔝
Bravo, vous envoyez quel gaz dans votre tube pour isolé votre fusion interne,
Argon pur comme celui dans votre torche ?
Thank you.MASTER.
Mejor que un robot.
Ну как всегда красота 👍
Hello friend, you have videos of titanium pipe welders with gas purge, thank you very much for your videos and sharing your knowledge✌️✌️✌️👋👋👋🙌🙌🙌🙌
Спасибо Вам! За очень полезные видеоуроки . Всё понятно без слов . Применял ваши способы не раз , всегда работают.
Very nice👍👍👍👍👍
저도 독학 이라서 항상 유용하게 시청 잘하고 있습니다.
Super.
Merci
오늘도 아름다운 영상 감사합니다^^~
Sim mestre observei bem essa apresentação de passe de raíz na plataforma giratória com a configuração da amperagem boa se faz um passe bem carregado formando uma bela raiz bem carregada e uniforme o vídeo ficou muito bom também obrigado pela apresentação 🇧🇷🙏
That is true...but is little bit a different and difficult with free hands.
How many years have you been welding?
I did not have a turn table and had to do it freehand .....sucks not having that type of equipment when you're doing a job on the fly.
1빠에요...
👌
👍
80 Amp.?
What was that black cable in this pipe?
LAN for IP camera.
Joke. Purge gas.
The tube is to feed argon gas into the inside of the pipe. It keeps oxygen out so that the weld stays clean and doesn't oxidise.
@@colintinker7778 Salut, l'introduction d'argon à l'intérieur du tuyau se fait avec quel moyen ?
@@woomdader The argon gas comes from a high pressure cylinder. The pressure is regulated to a very low pressure and fed to the welding torch and inside the pipe. The flow of the argon over the weld is about 15 litres / minute. This blows away the oxygen that will otherwise cause a bad weld and rapidly deteriorate the welding rod.
Yes thank you I meant the argon inside the pipe for the protection of the weld inside the pipe.
Do you need an argon diffuser pipe at 15l/min and isolate the inside of the stainless steel pipes with tape?@@colintinker7778
с потолка уже сложнее так выводить будет
сделай титры на русском😢
Now do itbhpoo
Sir your first 25-35 (mm) are undercut
Bro, you are very good at welding metal, but the video is not very good. Go to the channel “100 amper” and see how the welding process was filmed there))
Excess panitration
5ú6 yn
그만 굴려때우고 전자세5g라도 올려보쇼