@@RanjakarPatel Hi and welcome to my channel. Do you mean we are from the same country or do you mean Christian Jenson is from the same village as you. Still, thank you for your feedback, greatly appreciated it. 😉
Wow! Great video you attention to detail and the in-depth explanation is extremely high quality. I was looking for a good AiO and i think i found it. Now i have to find a good case. Are you planning to check out the X870E Apex and Hero anytime soon ? Would love to get your opinion on these.
Hi JumperDynamix, welcome to my channel. For those boards, I have no access to them as they are meant for exclusive reviewers and I am not. So sorry about it. Thank you for your feedback and all the best with your build too. 😉
Hi Random Yooser, welcome back. Not really hitting, just happened that a series of sponsor I tried to seek and my dream come true.. except for Corsair and NZXT. tried numerous of times requesting but no response ... I guess my channel is still too small. Thank you for visiting.
Hi AbdulAziz AlShayji, welcome to my channel. This I have to apologize.. I have tried many times requesting from either NZXT or Corsair, they do not respond to me. I guess my channel is still very small. so sorry.
Hi! This is amazing video. I have a question, I saw on the site it seems like they were emphasizing the temps are cooler on intel new chip, doesn’t say much about the zen 5. Do you notice any difference comparing to the ryujin 3 non extreme?
Fantastic review again Kleo. Not finished watching yet but can you tell me if the new Emma Gen 8 v2 pump is noisy. The pump on the non extreme is a disaster so hoping Asetek have addressed it. Thanks
Hi Keith Flanagan, welcome to my channel. Regarding about the noise. If it's inside the case, I doubt it's going to be noisey for this Gen 8 V2 pump. As I did experience with the original Ryujin III, at first, it's quiet but later on when using it for sometime, I notice the noise to be louder, for this I can't tell you if it's going to be noisy after sometime, as I have tested only for about 2 weeks.
@@flaccus123 If between only the TRYX and this Liquid AIO, in terms of performance, I will go for the TRYX. but if for the LCD, I will still go for the GA II LCD.
What's your recorded liquid temp? I hate the fact that the fan curve is based on CPU temp and not liquid temp, since it does ramp up when a short load hits the CPU.
@@KleoYan Thanks for the reply. Did you encounter issues to return it? My coolant temp seems to be (42-50*C) during load and (46-39*C) idle, this is with push pull config at low fan rpm of 900-1050 and 1700 pump speed.
@@saadhero9107 Hi, when I mentioned about returning the unit.. it means that for review item are on loan from Asus SG. Thats why returning them is of no issue. As for the unit itself. I have run it for almost a month before I create this content and I prefer to run pump at 100% full speed. having pump to run befow 2500rpm defeat the purposes of this unit. you might want to set it to to pump at 80% instead of 100% , which is around 2880rpm.
@@KleoYan I bought the ASUS Ryujin 3 360. Model with Asetek Generation 8 version 1 pump bundled with Noctua fans. Ryujin 3 Extreme is Asetek Generation 8 Version 2 pump. I haven't found an answer if a significant difference between the newer Versions. From what information is available, the emphasis of version 2 is better intel ultra series cold plate coverage and easier mounting. Doesn't appear version 2 has done anything for amd
@@birdsoup777 Hi and welcome back. I can't answer on behalf of others and I do apologized that I can't answer to Intel either too. I hope I can test between the Ryjin 3 360 vs Ryujin 3 Extreme on both AMD and Intel platfrom but I have limits on the processor I have. So sorry about it. Just my experience. I do have the 9950X which runs cooler compared to this 7950X. Therefore this Ryujin 3 Extreme does perform which landed on rank 3rd.
Hi One Off, welcome to my channel. If there is a prepaste. I will use the prepaste. Asustek Liquid AIO thermal paste are as good as Arctic MX6. but if you do clean it out and repaste. It is as good for me too as I apply thermal paste this way. Timestamp 02:20 of this conntent ua-cam.com/video/xZ2R4roF1_Q/v-deo.htmlsi=bFAnHfLSPAFEgcZq&t=143
@@KleoYan that's great to know I understand it's all preference at the end of the day but with this expensive of a cooler would be cool to see you try self applied, cry sheets, maybe even Liquid Metal if possible? Thanks for response and I will give you a sub! Keep up the great work and thanks for engaging
@@1offparlay Hi ya and thank you for your reply. Honestly speaking, I got to disappoint you as these unit are loan set for reviews. I don't think I will apply liquid metal. Thank you for the suggestion though.
Hi Everything .5, welcome to my channel. I strongly not recommend to run two motherboar utltlity application in a system. what I did on this MSI B650M Mortar board is to unistall the MSI Center fully, using revo uninstaller, then install armoury crate. This way it will work, as I have tried using MSI Center together with the Asus Armoury Crate. that's where the issue is. my display on AIO is either black out or pixilized heavily. If you are are using gigabtye control center to control your mobo argb, rams argb. I advise you not to use this liquid cooler on your system.
@@vanik6639 is not LCP 9 is Liquid Crystal Polyermer material on the blade and it's of a 9 blader.. meaning to say, it has 9 blades which will draw more air.
@@vanik6639 I believe I have answered your question but you can have a closer look at the TL Wireless, not TL LCD ya.. the fans without the LCD.. they are stronger in airflow. ua-cam.com/video/EONzSLw9HyM/v-deo.html
Asus HAS to sell these fans seperately and probably bundle them with a fan/argb hub, little is spoken about the fans asus have been including to their aio's, premium all the way
Hi Alvaro Correa, welcome to my channel. Yes this fans can be found and sold seperately but need to search for them. I was able to find the old ryujin III at amazon but for these fans. they are of improve version. am still looking for them too.
I bought the ASUS Ryujin 3 360. Model with Asetek Generation 8 version 1 pump bundled with Noctua fans. Ryujin 3 Extreme is Asetek Generation 8 Version 2 pump. I haven't found an answer if a significant difference between the newer Versions. From what information is available, the emphasis of version 2 is better intel ultra series cold plate coverage and easier mounting. Doesn't appear version 2 has done anything for amd
Hi birdsoup777, I believe I have answered your question on your previous post and will reply here too. I can't answer on behalf of others and I do apologized that I can't answer to Intel either too. I hope I can test between the Ryjin 3 360 vs Ryujin 3 Extreme on both AMD and Intel platfrom but I have limits on the processor I have. So sorry about it. Just my experience. I do have the 9950X which runs cooler compared to this 7950X. Therefore this Ryujin 3 Extreme does perform which landed on rank 3rd.
Hi Everything.5, welcome to my channel. It will be best to use back Asus motherboard as this liquid AIO make use of Asus armoury crate. Unless you do not use other motherboard bands utility, which is in your case MSI Center.
@@everything.5180 what I am trying to say is. Is best to use Asus motherboard as default is using armoury crate. But if you using MSI board, you too can install armoury crate. But MSI board requires MSI Center. So if you install both. It might have glitches.
@@everything.5180 ok then should not be a problem. In this illustration. I am using the MSI b650m mortar and have installed the armoury crate so that I can control the lcd of this liquid aio. 😉
Hey Ryujin III 360 or Panoramax 360? I know that the Lian Li Galahad II Performance is the best in your tests, I had it on my computer but a few days ago my pump broke and I don't want the Lian Li Galahad again because of the RMA process (I live in the UK). I'm thinking about buying a Ryujin III, Panoramax or Corsair Titan RX (but you haven't tested this cooling) and replacing the original fans with Phanteks T30 fans (I have them because I had them installed on the Lian Li Galahad cooling).
Hi Bart, welcome to my channel. So sorry to hear your GA II Trinity Performance gave way. In my honest opinion, I will go for the Ryujin III ARGB Extreme. it's well balance and the fact that the grills at the side are more efficient compared to the TYRX Panorama. The VRM Fan on the pump does make into full use. Also another fact that the Asetek Gen 8 V2 pump really does better. At least to me is abit more quiet as compared to the Asetek Gen 8 pump. As for Corsair Titan RX, yes I can't say anything about it as I have wrote in but no reply. same goes to NXZT.
@KleoYan I liked my Lian Li so much, but I will have to wait a long time for a replacement, so I have to buy another cooler, and this time I want to buy one whose repair, if broken, will be less complicated. So you're saying that Ryujin III Extreme is a good cooling solution? Currently I have 13900kf, but next year I plan to replace it with 9800x3d or 9950x3d depending on performance. If I decided to buy Ryujin III Extreme, do you think it would be worth replacing the original fans with Phanteks T30? I saw that Asus in the Extreme version has thicker fans that are as thick as the T30, but their specification is probably worse than the T30. I have them at home because I had them mounted on Lian Li. Thanks for your opinions and help
@@Modsyyyyy yup.. correct, judging on how it's build. I like the practical grills on the Ryujin III 360 Extreme.. it makes more sense as compared to the TRYX, TRYX only have one vent area at the back. Also to place the T30. I will give that a try too. but sad to say I don't have T30 hahahah
Hi Everything .5, welcome to my channel. I have no idea about the Kraken Elite 360 and this extreme is an overhaul of it's structure and pump .. it's using Asetek Gen 8 v2 pump which is stronger compared to the non extreme. plus the details they have put into the design and it performs much better.
@@everything.5180 to me. once pump block inside a case, I can't hear anything.. even running at full speed.. it also depends on individual sensitivity and tolerance of frequency.. I do have sharp ears but these pump does not aggitate me.. it only gives a hum noise and not hiss noise.
Hi Johnny B. Root, welcome back, yup the Liquid Freezer III has lower radiator fan rpm and it's advantage is due to the thickness of the rad which is at 38mm, more surface area. Thats why the cooling is ranking top 5 in my list.
Hi randola esquisito, welcome to my channel. I have only tested a handful of Liquid AIO and the results are at timestamp 54:03 . I will take this as it's a well balance Liquid AIO that no only cool the CPU but on other areas like the VRM Heatsinks, M.2 Heatsinks and the DDR5 Heat spreader.
@@KleoYan Why are the results so different between you and other UA-camrs or forums? I've been looking and I can't find a toilet that is common among the tests... and some have a totally different performance, I'm lost about which toilet to use on a 9800x3d, I'm currently with a 7800x3d + lt720 and I wanted to improve the bathroom but I'm lost.
@@TUB3R4FUN Could it be they are in cooler country, I will be honest with you. normally I don't really watch other UA-camrs or stats as I am from a Hot and Humid country. so I will only test based on my experience. as for your second question. it greatly depends on what kind of weather condition also the method on how you apply the pressure of the cold pate to the IHS. I have my own strict method to mount it. Even on thermal paste, I use this method most of the time (if there are no prepaste on coolers) watch timestap 2:20 of this content ua-cam.com/video/xZ2R4roF1_Q/v-deo.html
@@KleoYan I live in Brazil, and it's very hot here too, sometimes the daytime temperature reaches 36/37 degrees and that ruins everything.I currently have an lt720 but given the difference of 2 degrees, for me it's not worth it to leave it and go for a rog extreme, as the price of a rog is equivalent to 4 lt720... I'm just going to change the fans for some phantek t30 or noctua and I think I will be served. thanks for the response
Just watched the full video. That's one annoying pump just like the non extreme. Very disappointed with Asetek 8th Gen. Seems the Bequiet Light Loop and EK Nucleus are the only AIO's which have pumps with decent noise profiles. 46:20
Hi ya Keith Flanagan, welcome back. hmm. I guess it's up to individual or might be my mic is too sensative. Anyway I have replied to your previous post about my experience with this liquid AIO. Thank you for your feedback. Greatly appreciated it.
@@MilanB023 hi and welcome to my channel, while illustrated on the sound test. I can only hear the rad fans hum but not the pump. That’s my experience of it.
Hi Peter Ferguson, welcome to my channel. Yup there is a section where it says to plug Aida64, I've tested it. It does not work at the moment. I think Asus is still working on this. Anyway I have feedback to Asus SG. Thank you for your feedback too. 😉
try first to disable the display from armory crate then go to AIDA64, click on the 3 dots at the top right corner, click on LCD from the hardware monitoring on the right, check the Enable Asus ROG AIO LCD support and that should be it. next, you just make your own design in the LCD Items.
Nice cooler still awaiting for the white version to be available for purchase
Hi Robin Morel, welcome to my channel. Hopefully it will be out in the market soon for sales and all the very best too.
I really appreciate your reviews. You are the most thorough reviewer I’ve seen. Just ordered the AIO. Thank you!
Hi Christian Jensen, welcome to my channel and thank you for your feedback. All the best with your build too 👍👍👍
@@RanjakarPatel Hi and welcome to my channel. Do you mean we are from the same country or do you mean Christian Jenson is from the same village as you. Still, thank you for your feedback, greatly appreciated it. 😉
Wow! Great video you attention to detail and the in-depth explanation is extremely high quality. I was looking for a good AiO and i think i found it. Now i have to find a good case. Are you planning to check out the X870E Apex and Hero anytime soon ? Would love to get your opinion on these.
Hi JumperDynamix, welcome to my channel. For those boards, I have no access to them as they are meant for exclusive reviewers and I am not. So sorry about it. Thank you for your feedback and all the best with your build too. 😉
Wooo!! You are hitting us with great content! Thanks, Kleo! 🎉🙏
Hi Random Yooser, welcome back. Not really hitting, just happened that a series of sponsor I tried to seek and my dream come true.. except for Corsair and NZXT. tried numerous of times requesting but no response ... I guess my channel is still too small. Thank you for visiting.
@KleoYan you're doing a great job! Wish you the best.
@@RandomYooser Thank you for the support. I try to keep up. 😁
Excellent review as always. Would love to see a review on the Kraken Elite 360 RGB v2, and how it compares to the rest. Thanks.
Hi AbdulAziz AlShayji, welcome to my channel. This I have to apologize.. I have tried many times requesting from either NZXT or Corsair, they do not respond to me. I guess my channel is still very small. so sorry.
Hi! This is amazing video. I have a question, I saw on the site it seems like they were emphasizing the temps are cooler on intel new chip, doesn’t say much about the zen 5. Do you notice any difference comparing to the ryujin 3 non extreme?
Hi Mento, welcome to my channel. I can't answer your question as I have not test on any Intel platform. So sorry about it.
Was waiting for this one!
Do you know if the pre-applied paste is ROG RG-07?
hi sabishiihito, welcome back and thanks for waiting. Hope you did enjoyed this content. 😉
Such a fantastic aio, I also had the Ryujin 3
Hi Sinnermac, welcome to my channel. Infact what amaze me more is their Primce LC360 ua-cam.com/video/t2RvOj2Rubg/v-deo.html
Fantastic review again Kleo. Not finished watching yet but can you tell me if the new Emma Gen 8 v2 pump is noisy. The pump on the non extreme is a disaster so hoping Asetek have addressed it. Thanks
Hi Keith Flanagan, welcome to my channel. Regarding about the noise. If it's inside the case, I doubt it's going to be noisey for this Gen 8 V2 pump. As I did experience with the original Ryujin III, at first, it's quiet but later on when using it for sometime, I notice the noise to be louder, for this I can't tell you if it's going to be noisy after sometime, as I have tested only for about 2 weeks.
Thanks. Do you prefer the Tryx Panorama?
@@flaccus123 If between only the TRYX and this Liquid AIO, in terms of performance, I will go for the TRYX. but if for the LCD, I will still go for the GA II LCD.
Phanteks t30 360mm is much much better
@@bennibenni4347 Hi and welcome to my channel. Thank you for your feedback.
What's your recorded liquid temp?
I hate the fact that the fan curve is based on CPU temp and not liquid temp, since it does ramp up when a short load hits the CPU.
Hi SAAD HERO, welcome to my channel. I am so sorry as I've returned this Liquid AIO to Asus SG, not able to tell you the liquid temp.
@@KleoYan Thanks for the reply. Did you encounter issues to return it?
My coolant temp seems to be (42-50*C) during load and (46-39*C) idle, this is with push pull config at low fan rpm of 900-1050 and 1700 pump speed.
@@saadhero9107 Hi, when I mentioned about returning the unit.. it means that for review item are on loan from Asus SG. Thats why returning them is of no issue. As for the unit itself. I have run it for almost a month before I create this content and I prefer to run pump at 100% full speed. having pump to run befow 2500rpm defeat the purposes of this unit. you might want to set it to to pump at 80% instead of 100% , which is around 2880rpm.
Thanks leo,because you speak english and whole world understand.
HI Ion Cătălin Dragan, welcome to my channel. Thank you for your feedback but there are still some who will not understand though 🤔
Awesome video. Thank you for explaining this to us
Hi ya birdsoup777, welcome to my channel. I am glad you like this contnet 😁. Thank you for your feedback and all the best with your build too. 😉
@@KleoYan I bought the ASUS Ryujin 3 360. Model with Asetek Generation 8 version 1 pump bundled with Noctua fans. Ryujin 3 Extreme is Asetek Generation 8 Version 2 pump. I haven't found an answer if a significant difference between the newer Versions. From what information is available, the emphasis of version 2 is better intel ultra series cold plate coverage and easier mounting. Doesn't appear version 2 has done anything for amd
@@birdsoup777 Hi and welcome back. I can't answer on behalf of others and I do apologized that I can't answer to Intel either too. I hope I can test between the Ryjin 3 360 vs Ryujin 3 Extreme on both AMD and Intel platfrom but I have limits on the processor I have. So sorry about it. Just my experience. I do have the 9950X which runs cooler compared to this 7950X. Therefore this Ryujin 3 Extreme does perform which landed on rank 3rd.
What are your thoughts on removing thermal paste from cooler and adding your own? Would you see any improvements? Particularly the arctic 5 silver?
Hi One Off, welcome to my channel. If there is a prepaste. I will use the prepaste. Asustek Liquid AIO thermal paste are as good as Arctic MX6. but if you do clean it out and repaste. It is as good for me too as I apply thermal paste this way. Timestamp 02:20 of this conntent ua-cam.com/video/xZ2R4roF1_Q/v-deo.htmlsi=bFAnHfLSPAFEgcZq&t=143
@@KleoYan that's great to know I understand it's all preference at the end of the day but with this expensive of a cooler would be cool to see you try self applied, cry sheets, maybe even Liquid Metal if possible? Thanks for response and I will give you a sub! Keep up the great work and thanks for engaging
@@1offparlay Hi ya and thank you for your reply. Honestly speaking, I got to disappoint you as these unit are loan set for reviews. I don't think I will apply liquid metal. Thank you for the suggestion though.
nice video thank you 🙂
Hi FurioZa I, welcome to my channel and thank you for your feedback 👍👍👍
Now I have aours master motherboard and using gigabyte control center , Are there any problems if I put this cooler
Hi Everything .5, welcome to my channel. I strongly not recommend to run two motherboar utltlity application in a system. what I did on this MSI B650M Mortar board is to unistall the MSI Center fully, using revo uninstaller, then install armoury crate. This way it will work, as I have tried using MSI Center together with the Asus Armoury Crate. that's where the issue is. my display on AIO is either black out or pixilized heavily. If you are are using gigabtye control center to control your mobo argb, rams argb. I advise you not to use this liquid cooler on your system.
@
Thanks for reply, but who’s better , nzxt kraken elite or Lian li Galahad
@@everything.5180 I do not have a NZXT Kraken Elite to test with, am so sorry for this, can't answer to your question.
Amazing Review KLeo! Muchas gracias ❤
Hi Nap Oficial, welcome back. Don't mentioned it.. I am glad you like my content. 😉
I have an odd question regarding Lian Li fans. Outside of aesthetics, which is better in your opinion for these fans? TL wireless or SL wireless?
@@vanik6639 hi welcome to my channel. Definitely the TL wireless as they are of LCP 9 blader.
@ thank you. What is LCP 9?
@@KleoYan thank you. What is LCP 9?
@@vanik6639 is not LCP 9 is Liquid Crystal Polyermer material on the blade and it's of a 9 blader.. meaning to say, it has 9 blades which will draw more air.
@@vanik6639 I believe I have answered your question but you can have a closer look at the TL Wireless, not TL LCD ya.. the fans without the LCD.. they are stronger in airflow. ua-cam.com/video/EONzSLw9HyM/v-deo.html
Asus HAS to sell these fans seperately and probably bundle them with a fan/argb hub, little is spoken about the fans asus have been including to their aio's, premium all the way
Hi Alvaro Correa, welcome to my channel. Yes this fans can be found and sold seperately but need to search for them. I was able to find the old ryujin III at amazon but for these fans. they are of improve version. am still looking for them too.
If they make a white 420 I'd buy it.
Hi Rav_Enous, welcome to my channel. I will feedback to Asus SG, thanks for your feedback. 😉
I bought the ASUS Ryujin 3 360. Model with Asetek Generation 8 version 1 pump bundled with Noctua fans. Ryujin 3 Extreme is Asetek Generation 8 Version 2 pump. I haven't found an answer if a significant difference between the newer Versions. From what information is available, the emphasis of version 2 is better intel ultra series cold plate coverage and easier mounting. Doesn't appear version 2 has done anything for amd
Hi birdsoup777, I believe I have answered your question on your previous post and will reply here too. I can't answer on behalf of others and I do apologized that I can't answer to Intel either too. I hope I can test between the Ryjin 3 360 vs Ryujin 3 Extreme on both AMD and Intel platfrom but I have limits on the processor I have. So sorry about it. Just my experience. I do have the 9950X which runs cooler compared to this 7950X. Therefore this Ryujin 3 Extreme does perform which landed on rank 3rd.
I believe it’s because the Asetek V1 has a lot of complaints about pump noise. You can google it.
is better to use this with asus motherbaords? Will I lose anything if i use it with msi motherbaords or any brand
Hi Everything.5, welcome to my channel. It will be best to use back Asus motherboard as this liquid AIO make use of Asus armoury crate. Unless you do not use other motherboard bands utility, which is in your case MSI Center.
@@KleoYan
u mean i cant use armoury crate to contorl this aio if i dont have asus motherboards
@@everything.5180 what I am trying to say is. Is best to use Asus motherboard as default is using armoury crate. But if you using MSI board, you too can install armoury crate. But MSI board requires MSI Center. So if you install both. It might have glitches.
@@KleoYan
NO I dont use msi center at all
@@everything.5180 ok then should not be a problem. In this illustration. I am using the MSI b650m mortar and have installed the armoury crate so that I can control the lcd of this liquid aio. 😉
Hey
Ryujin III 360 or Panoramax 360? I know that the Lian Li Galahad II Performance is the best in your tests, I had it on my computer but a few days ago my pump broke and I don't want the Lian Li Galahad again because of the RMA process (I live in the UK). I'm thinking about buying a Ryujin III, Panoramax or Corsair Titan RX (but you haven't tested this cooling) and replacing the original fans with Phanteks T30 fans (I have them because I had them installed on the Lian Li Galahad cooling).
Hi Bart, welcome to my channel. So sorry to hear your GA II Trinity Performance gave way. In my honest opinion, I will go for the Ryujin III ARGB Extreme. it's well balance and the fact that the grills at the side are more efficient compared to the TYRX Panorama. The VRM Fan on the pump does make into full use. Also another fact that the Asetek Gen 8 V2 pump really does better. At least to me is abit more quiet as compared to the Asetek Gen 8 pump. As for Corsair Titan RX, yes I can't say anything about it as I have wrote in but no reply. same goes to NXZT.
@KleoYan I liked my Lian Li so much, but I will have to wait a long time for a replacement, so I have to buy another cooler, and this time I want to buy one whose repair, if broken, will be less complicated. So you're saying that Ryujin III Extreme is a good cooling solution? Currently I have 13900kf, but next year I plan to replace it with 9800x3d or 9950x3d depending on performance. If I decided to buy Ryujin III Extreme, do you think it would be worth replacing the original fans with Phanteks T30? I saw that Asus in the Extreme version has thicker fans that are as thick as the T30, but their specification is probably worse than the T30. I have them at home because I had them mounted on Lian Li. Thanks for your opinions and help
@@Modsyyyyy yup.. correct, judging on how it's build. I like the practical grills on the Ryujin III 360 Extreme.. it makes more sense as compared to the TRYX, TRYX only have one vent area at the back. Also to place the T30. I will give that a try too. but sad to say I don't have T30 hahahah
@KleoYan thanks for help 😉
@@Modsyyyyy You are most welcome. All the best with your future build or replacement too 😉
Thank you
Hi Rafal Poblocki, you are most welcome 😉
Is this better than kraken eltie 360 ? and wahts the Difference between the extreme and non extreme
Hi Everything .5, welcome to my channel. I have no idea about the Kraken Elite 360 and this extreme is an overhaul of it's structure and pump .. it's using Asetek Gen 8 v2 pump which is stronger compared to the non extreme. plus the details they have put into the design and it performs much better.
@@KleoYan
how about noises. its better than before
@@everything.5180 to me. once pump block inside a case, I can't hear anything.. even running at full speed.. it also depends on individual sensitivity and tolerance of frequency.. I do have sharp ears but these pump does not aggitate me.. it only gives a hum noise and not hiss noise.
@@KleoYan
Thanks a lot
@@everything.5180 You are most welcome.
55:06 Wow I did t realize the Artic fans were much slower than the competition.
Hi Johnny B. Root, welcome back, yup the Liquid Freezer III has lower radiator fan rpm and it's advantage is due to the thickness of the rad which is at 38mm, more surface area. Thats why the cooling is ranking top 5 in my list.
for a 9800x3d which aio you think is the best to perform?
Hi randola esquisito, welcome to my channel. I have only tested a handful of Liquid AIO and the results are at timestamp 54:03 . I will take this as it's a well balance Liquid AIO that no only cool the CPU but on other areas like the VRM Heatsinks, M.2 Heatsinks and the DDR5 Heat spreader.
@@KleoYan Why are the results so different between you and other UA-camrs or forums? I've been looking and I can't find a toilet that is common among the tests... and some have a totally different performance, I'm lost about which toilet to use on a 9800x3d, I'm currently with a 7800x3d + lt720 and I wanted to improve the bathroom but I'm lost.
for example, deepcool mystique appears well on some channels and on others it does not appear so well.
@@TUB3R4FUN Could it be they are in cooler country, I will be honest with you. normally I don't really watch other UA-camrs or stats as I am from a Hot and Humid country. so I will only test based on my experience.
as for your second question. it greatly depends on what kind of weather condition also the method on how you apply the pressure of the cold pate to the IHS. I have my own strict method to mount it. Even on thermal paste, I use this method most of the time (if there are no prepaste on coolers) watch timestap 2:20 of this content ua-cam.com/video/xZ2R4roF1_Q/v-deo.html
@@KleoYan I live in Brazil, and it's very hot here too, sometimes the daytime temperature reaches 36/37 degrees and that ruins everything.I currently have an lt720 but given the difference of 2 degrees, for me it's not worth it to leave it and go for a rog extreme, as the price of a rog is equivalent to 4 lt720... I'm just going to change the fans for some phantek t30 or noctua and I think I will be served. thanks for the response
great ✌️👌
Hi ya CGC, welcome back and thank you for your feedback.
Just watched the full video. That's one annoying pump just like the non extreme. Very disappointed with Asetek 8th Gen. Seems the Bequiet Light Loop and EK Nucleus are the only AIO's which have pumps with decent noise profiles. 46:20
Hi ya Keith Flanagan, welcome back. hmm. I guess it's up to individual or might be my mic is too sensative. Anyway I have replied to your previous post about my experience with this liquid AIO. Thank you for your feedback. Greatly appreciated it.
@@KleoYan Hi great video,is pump to lound while gaming? Or its okej? Thanks
@@MilanB023 hi and welcome to my channel, while illustrated on the sound test. I can only hear the rad fans hum but not the pump. That’s my experience of it.
@ That is normal right? Sry i never use aio before. Thank you for the answer!
@@MilanB023 yup, it's normal. no worries. but the hearing sensitivity is up to individual. For me it's not loud as I run the pump at full speed.
Easiest AIO I have ever installed. Only downside is I can't seem to use AIDA64 but have to use Armoury Crate which as we all know is a beast.
Hi Peter Ferguson, welcome to my channel. Yup there is a section where it says to plug Aida64, I've tested it. It does not work at the moment. I think Asus is still working on this. Anyway I have feedback to Asus SG. Thank you for your feedback too. 😉
try first to disable the display from armory crate then go to AIDA64, click on the 3 dots at the top right corner, click on LCD from the hardware monitoring on the right, check the Enable Asus ROG AIO LCD support and that should be it.
next, you just make your own design in the LCD Items.
@@KleoYanuse beta version of AIDA64
@Soulmare ok will give it a try.. thank you.. greatly appreciated your sharing of info.
@@majd00shka hi and welcome to my channel. that's good info. do pardon me of my ignorance ono this.. thank you for sharing.. greatly appreciated it.