Scrap Mechanic Craslander Mod Battery Generator

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 19

  • @Clone_L
    @Clone_L 11 місяців тому +3

    This was actually useful. I thought the bearing had to be physically connected to the alternator. Thank you brother

    • @WillR21
      @WillR21  11 місяців тому

      Happy to know this! I'm glad

  • @Mr_A1R
    @Mr_A1R 11 місяців тому +4

    thank you so much, I was trying to do this and failing for about 2 hours then I saw your video and it helped me so much. You are a legend brotha

    • @WillR21
      @WillR21  11 місяців тому

      Ma hart, ma soul... Hahahaha, thanks for this comment, I feel rejoice that it help you

  • @mrdirtydeedz2873
    @mrdirtydeedz2873 11 місяців тому +1

    Be aware that this free energy machine can very well take off into space and glitch through the world mesh.

    • @WillR21
      @WillR21  11 місяців тому +2

      yes, that happened to me, till this day i don't know if I'll see my prototype again, I only know it's out there and maybe looking for vengeance

  • @MrTechblackdog
    @MrTechblackdog 11 місяців тому +2

    Mind if I ask? Is there a "Best Block to use with the bearing?" is lite better or heavier better? like large tires or pipes?
    I know 11 bearing {10 on controller} with copper blocks. when chunks is reloaded, turns into Death Storm!!! 'O.K.ed' me 3 times, before I got to pulled the controller. to stop Death Storm.

    • @WillR21
      @WillR21  11 місяців тому +1

      I have test it with a few blocks, I get with some pipes that are call generator rods (if I remember correctly) also I used reinforce concrete, both of then works great, the deal here I guess is not having the generator on all the time, the alternator puts a lot of resistance in the bearing and they go wild if they are left loose, you could go for a good friction block or a heavy one, avoid pipes.... I... It send me to another realm... Let's keep it that way

  • @robtheking8316
    @robtheking8316 11 місяців тому +2

    Wont it be better to use the loop setting on the controller?

    • @WillR21
      @WillR21  11 місяців тому +2

      They loop is made to work as a bottom being push from time to time, the only reason to have is because if let loose the bearing could turn into a deadly trap, so is like a "safe" mechanism, but not a foolproof one 😅 that's a hard learned lesson...

  • @Roboman5e15
    @Roboman5e15 11 місяців тому +2

    i had to turn up my speakers to 75%

    • @WillR21
      @WillR21  11 місяців тому +1

      Sorry for that, I'm new to editing so I'll have it in mind the next time, thanks for the comment

  • @jamesbardwell1955
    @jamesbardwell1955 11 місяців тому +1

    i cant get it to work :(

    • @WillR21
      @WillR21  11 місяців тому +1

      Thats weird, another thing you can try is to put the controller in loop and put turning it on with a switch, also be in mind that all the bearings must turn in the same direction, try to play with that it must work

    • @martinfortin720
      @martinfortin720 11 місяців тому +1

      i built it too and all the bearing does is slow down after you connect it to the alternator

    • @WillR21
      @WillR21  11 місяців тому +1

      Yes, when you attach the alternator is going to slow down, what you need to check is that the controller is at max velocity, also that you have the 4 bearing rotating in the same direction and last but not least that the bearing of the alternator is at the end of the setup, if you put it in between or less than 4 bearing you won't generate enough force

  • @stepankrustunuch3744
    @stepankrustunuch3744 8 місяців тому

    Можна силку на мод

  • @Roboman5e15
    @Roboman5e15 11 місяців тому +1

    i cant hear you at all

    • @WillR21
      @WillR21  11 місяців тому

      Thanks for the criticism, I'll try to correct that in the coming videos