Це відео не доступне.
Перепрошуємо.
How to change your rotary cutter blades & proper disposal~Replace your rotary cutter blades!
Вставка
- Опубліковано 31 тра 2020
- Learn how to change your rotary cutter blades for both right and left handed people.
Rotary cutter blades assembly can be tricky to put back together.
I give you some tips and tricks to know if you have your rotary cutter blades on right!
Learn how to replace the blade safely.
I will also show you how to dispose of your rotary cutter blades safely.
Panasonic 360 Ceramic Cordless Freestyle Metallic Red Iron
Click this link for exact iron I'm using- amzn.to/3f2Riwo
Here is my exact iron in red! amzn.to/2Z1abdw
Here's the link to the 60mm OLFA rotary cutter I use - amzn.to/3f5fRsx
Here is link to my exact ROUND cutting/ironing mat/board that I use- amzn.to/2ZGWgs5
Link to the 45mm rotary OLFA cutter I use- amzn.to/2Z1AJv9
Click here for the exact Yeti you always see me drinking my coffee out of :) amzn.to/38u1Q5c
Link to my BIG SULLIVAN'S craft/hobby table-amzn.to/2O2ER7I
Link to the clear/white Sullivan's cutting mat for my craft table- amzn.to/3f62mZE
Buy the absolute best BBQ sauce / Flame Shack BBQ sauce here: www.flameshack.com YOU WON'T BE DISSAPOINTED!
LET ME KNOW....LET ME KNOW......are you right or left handed????????????????????
I'm right handed :)
Right handed. Love your channel.
Thank you!!!!
Left! And I didn’t know it was interchangeable! It explains why I struggle to cut! 🤦🏼♀️
You and so many others - that’s why I had to do a video on it ✂️❤️✅
Best video for left handed folks! Great tips! Thank you
Right handed and this was so helpful. Another tip, some municipalities require special sharps disposal. Mine does so I save old blades in a glass container until I can take. And out of sight of little hands looking for sewing snacks.
Best explanation I’ve found, thank Tracy. I use both hands so I was confused. Needed this video,!
concise and well explained for all components an excellent guide.
Love this demo! I failed to pay attention to how the bolt is positioned. This is the only video I've seen that explains how the hollow part of the bolt goes on first. Thank you, thank you, thank you.
You’re welcome Gayle 💜
Thank you so much for clear instructions. I was literally in tears trying to change blade.
Thanks for the info re cutters. I knew mine wasnt working properly and Ive lost the yellow washer. I’ll have to buy a new one.
Just for information. I had my husband change out my rotary blade. I found that it was not cutting really for a new blade but we were in a hurry to get out to the airport…I just grabbed the piece of fabric to go to the store. The next day, I am trying to cut fabric to make placemats for a friend only to notice that he had inserted through error as they are very thin…TWO blades. In my rush to separate the 2 blades I had to refer to a video to do it right! Thank you! Experienced quilters, please forgive me….
Thank you! I had put my cutter back together all wrong! I'm good now!
As a lefty, I really appreciate this! Going to look for my 1st rotary cutter. Thanks!❤️
Thank you! I’m left handed.
You're welcome!
Thank you! I was placing the washer in the wrong position.
Thank you. Found out I had it put together incorrectly. BTW-rt handed.
Very good instructions, thank you
You are welcome!
Thank you. I’ve ch trouble it’s my rotary cutter. Probably because they are not put back together properly. So frustrating. I’m buying a new one and following your instruction. What is the safest cutter in your opinion?
Thanks for good instructions.
You’re welcome 💛
Thank you, thank you! Helpful visual.
Thanks so much for the help - that solved my issue. Just FYI I purchased a needle disposal box from amazon (about $5). The lid is wide enough for the blades to fit and Ive had it for a year now and still filling. I also toss in old needles... anything sharp. The thought of someone accidentally cutting themselves after tossing troubled me to know end.
You’re welcome! That is such a great idea getting a puncture resistant box. ✅🤓 Happy 2021🎉🥳
I'm left handed and would love to know where to purchase this rotary cutter. I tried to change my blade last week and I forgot to lay the pieces out in the correct order. I finally figured it out but, wished I had seen your video first. Thank so much for sharing this info.
You can buy it anywhere that sells sewing gear! Joanns has it. Or online anywhere. It’s an olfa 45mm disc. Be sure that it looks identical to mine- make sure it retracts when you release. ✂️✅
@@TheSewingChannel Thank you so much for letting me know where I can purchase this rotary cutter. Stay safe!
I use the plastic holder the blade originally came in when it’s time to dispose of the blade. I then wrap that with some tape. It is really hand for when you are at a class and need to transport the bad blade.
Great thinking! I buy mine in bulk on eBay… So it only comes with one case. So I have to get imaginative to get rid of it!😀
I put a "P" on my old blades and use them for paper. Works great when wrapping gifts!!!!! Then i put the old ones in a small box and when i have to go to the doctor i ask if they mind if I put them in there sharp container. they almost always say yes. or you can by a sharp container and then see if the doctor will take care of them. just don't ask if its a new Dr.
Found you channel when looking for a face mask pattern and have just watched this video about rotary cutters as I’m relatively new to quilting. Discovered my blade was on the wrong side, definitely wasn’t helping my cutting technique.
Many thanks.
many have had it on wrong and never even knew it! I'm so glad you have it on right now :)
Me too!
How do you push out the blade because I can’t get mine to do that and I’ve watched so many videos yeah I just bought and I’m really not sure how to use it
There is a button where you push the blade out.
my blade is very loose should it be tighter.
*_Your'e bolt that holds your blade should be snug/tight but don't "over tighten".✅_*
My 60mm Olfa cutter doesn't have the yellow guard part. Can't remember if it came with it & I lost it or, if I never had it in the first place. Is it necessary?
Hhmmmm well all the parts are definitely necessary. You could have a different model. Not sure without seeing it. Look online and compare yours to some other pics and see if it matches. ✅
@@TheSewingChannel mine don’t have yellow part either…. Thought I may have lost it.
Should the blade wobble, mine does and
No Sharon. It should not wobble. You may not have it on correctly or there could be a piece missing. Double check to make sure✅
Hello, Thank you for your video. I have a question. Well, its more of a dilemma. I did this exactly how you did it but my blade is wobbling when I use it to cut. I have the nut tightened as far as it will fo, I wrote to the company asking for advice but they never responded. So now when I cut with my rotary cutter my cuts are crooked because the blade wobbles around. I just don;t understand. Any advice or thoughts?
Hmmmm interesting. Are you sure you have all the pieces? Is the metal disc placed in cupping position?
@@TheSewingChannel Yes I did it exactly how you did it in the video. I know its hard to try & diagnose a problem site unseen but I thought I would take a shot lol. THank you for replying to me
It is hard to say without seeing. Try turning the last bolt(the thick one) around. See if it will thread on that way. Ya never know. Let me know.
@@TheSewingChannel OK I will try that. Thank you!
@@lostosbourne I just now turned my big outside bolt around and threaded it on “backwards “. It threads on for sure but makes my blade wobbly if I try to cut. I bet that’s it! Let me know🤓✅
What kind is it?
Olfa ✅
@@TheSewingChannel
I thought so but wasn't sure, do you like it, does it cut easy I have arthritis so I want something easy, I saw the Olfa Splash but it has no type of grip even though the reviews are good..what do you think?
Really do like this one that’s in the video… I have two other ones but I so much more prefer this one. I have arthritis as well. It retracts when not in use on its own and I really love that feature!❤️✂️✅
@@TheSewingChannel
Oh ok good point Thank you. I saw 45 and 60 I believe im not sure which one to get. Im tired of scissors though :)
@@TheSewingChannel
I think that's the blade type
I am left handed.
They say left handed people are smarter.... so we are glad your here then!!! 😃😷