15 Suzuki Samurai Front Knuckle Rebuild Part 5 - Assembly
Вставка
- Опубліковано 20 сер 2024
- After cleaning and replacing all the races, bearings, bushings and seals, we are going to finish the rebuild process of the front knuckles on our Suzuki Samurai with all new parts and bolts.
The complete list of bolts and washers needed for the front knuckle rebuild can be found at
1:01:46
Part 5 of 5.
patreon
/ supplementaryservicema...
buymeacoffee
www.buymeacoff...
reddit
/ supplementarysm
twitter
/ supplementarysm
mastodon
mastodon.social...
instagram
/ supplementaryservicema...
discord public invite
/ discord
Thank you for making these videos. Cute couple, enjoy the commentary. Also, learned much from your vids.
glad that the videos help! and thank you :).
Thanks so much for taking the time to posting these videos 😊. Always enjoyed Suzuki Samurai’s.
even though the filming and editing prolongs everything a lot, we like making videos about how to fix or make something yourself.
thank you for watching! :).
Thank you now I can complete my build !!
we are glad that our video helped!
share the word :).
Where did you get that tool to push down the races?
we made it ourselves. some more details in video number 10, at around 15min mark.
What torgue did you use for the nuts om the bearings, also the secure nut?y problem is, that the wheel gets blocked....
tighten the main nut to 75Nm while sniping the hub to make it all seat in its place, then loosen all the way, then preload it with 10Nm. and the locking put the nut on with 75Nm.
i did not understand the rest of the comment, but i hope this helps.
Hi, what sealing compound are you using at the minute 24.19? thank you
if i remember correctly it is loctite si 5910. you can get it in large tubes or in smaller pressurized tubes like you see in the video.
Are those regular springs or are they lifted front springs?
smallest lift we could find, around 50mm. with regular spring we had around 20mm of travel before hitting the bump stops because they were collapsed.