Looks great. I enjoy your videos and dedication to updating boards to keep a competitive product. Also glad to hear you mention that the evolve used on comparison video before needs to go to customer service. My gtr works great and doesn't get very hot so I knew something was wrong. If I didn't have a gtr already I would probably get one of yours!
I need to see the belt board with the new rubber compared to Evolve GTR. I like your board a lot but the issue is I have 4 boards already and a OneWheel XR. Need to unload the old Boosted....
I don't know how youtube knew but I was looking for a very similar video to this. Thanks for making Esk8 direct drive AT tire uphill test with temperature analysis.
I’d like to know the temp after a hill climb vs Revel. Looks like the temp reading was still going up, after you read “49!” Why not have a 4x4 DD option, for those that live on Streep hills? Less strain on individual motors + higher hill climb %. Plus, with AWD, you can use Janux Quattro for 6” or 7” air filled, comfortable tires.
Yup , the rubbr wheels are def. Soft and strong at the same time . I didn‘t even note that they are with Aluminium core when i ordered them 🤣 . The range might be a little less than the cloudwheels but when i wanna ride more like allterrain i def. Switch to them . They are almost noisy like the 97‘ ... cloudwheels are way louder but not that much . Got 43km/h with rubberwheels (on 10S BC) . You rock buddy
@@Triall00 i guess you mean the black rubber wheels with aluminium rims , they are strong and soft at all terrain but they will def reduce the range a bit ,but its ok . I prefer to ride the cloudwheels and not faster than 30km/h ,its really dangerous stuff and ain t worth it to end up in hospital or 6feet under ,even a protection kit will not provide a safe way of elektric skateboarding .
Hey Fabi! I weigh 190lb or 86kg and I really like direct drive over belts (in my mind it seems like less maintenance) but like the ability to use AT wheels with belt drive. What setup would you recommend?
The direct drive motors are so close to the ground. I don’t see them being less maintenance. If a motor goes bad it will be easier to replace a outrunner motor vs a direct drive imo.
@@enjoyesk8978 Being low to the ground is both exaggerated (that only meant something back when boards were often running smaller wheels under 90mm). Clearance hasn’t been an issue for awhile now. As for maintenance - it’s hella easier. I’m constantly keeping crap out of my belts. Also I love the absolute quiet of dd.
So which one climbs better? Which one goes faster and has better acceleration? We saw just a temp comparison and it gives 0 information regarding specs of the board..
It is direct drive not hub, they are both good. direct deive requires less maintenance, they are way more silent and they are less hot but they have less torque and if you change wheel size you will not be able to change gear ratios while the belt have more torque and you are able to match the power with any wheel size by changing the gears but they are loud, high maintenance and hotter. also you can see that the deck of the belt is longer, wider and more flexible while the direct is the opposite. hope I answered yout question.
Noisy skateboards have good points and bad points. They sort of ruin the ambiance of the trail... But in crowded situations boardwalks in town. They work to let people know you're coming up on them... Instead of ringing a horn or Bell... I scored a very cheap brand new electric skateboard. Super stoked. I almost bought your (fab board). It's a good deal on a stronger better board...but I so low on cash.to replace my blinkS2... So went for 200$ board.
The Rubber wheels just give you an even better riding feeling depends a little where you ride. 115mm wheels are currently sold out. Next stock should be here in two weeks
Fabi hey Fabi. I just ordered the belt driven version of the black carve with the rubber wheels but I think I want to use the cloud wheels. Can I just take off the rubber wheels and put on the cloud wheels or would I need different pulleys etc?
so the BELT drive. changing the smaller rubber wheels to the AT wheels doesnt need to adjust the motor position when switching the gear/pully????? pls confirm. if so, THATS AMAZING
good lord it's beautiful there. I'd be out cruising every day. Around 6 min you say "It's a carbon fiber board, I know the difference". What do you mean by that, is the ride smoother? rougher?
keep up the good work ! i just bought ONSRA BLACK Carve direct drive 12s3p and i cant wait to have it xD do the 12s3p have the same range as the 10s4p ?
Just using math I'd guess the 12s3p would have roughly 10% less range than the 10s4p pack with the same cells. Your acceleration and climb will be out of this world though!
Hey Fabi, i just got a vestar mini after watching your review! im in love with the board but its really hard on my feet when im not on super smooth roads. I was wondering if its possible to change the wheels on it and what wheels you would recommend.
I really like that you start your Video normally now not with those Skipping in the middle of a video and then going back unrelated and back and forth.. New Style is better for sure
Love the direct drive, but belt driven just seems more maintainable. Those motors are going to get knock out of balance and chewed up. Maybe ok with big off-road wheels
Sorry for quality just wanna show the cloudwheels on AT at speed of 28km/h . Better dont drive faster on stuff like this 😉 . ua-cam.com/video/NT1V3gIr04w/v-deo.html
Everybody please please please wear a full faced helmet when using an electric skateboard. This should be standard. Half helmets are not enough. Please upvote this so everybody sees!
Why should it be standard? Not everyone is speeding along at 25+ mph. If you made people wear a full face helmet it will stop people wanting to ride e-boards in the first place.
Looks great. I enjoy your videos and dedication to updating boards to keep a competitive product.
Also glad to hear you mention that the evolve used on comparison video before needs to go to customer service.
My gtr works great and doesn't get very hot so I knew something was wrong.
If I didn't have a gtr already I would probably get one of yours!
Working on a lot more videos! Sorry about that 🙈
I need to see the belt board with the new rubber compared to Evolve GTR. I like your board a lot but the issue is I have 4 boards already and a OneWheel XR. Need to unload the old Boosted....
Yeah good video but we want the onsra AT board vs the carbon/ bamboo GTR fabi :)
I love Fabi's honesty. His reviews are the BEST. HONESTY in a review is EVERYTHING.
I don't know how youtube knew but I was looking for a very similar video to this. Thanks for making Esk8 direct drive AT tire uphill test with temperature analysis.
It’s fun to watch your videos for so many reasons, thanks for the great info!
Will you be making a board that’s 41-42inches (1066mm-1070mm)? Please please do, especially for these boards with wider trucks.
If fabi didn't have that beautiful background I wouldn't be so hooked on his stories
Just ordered the belt drive onsra black carve with the 115mm rubber wheels and eagerly awaiting for its arrival 🙌
did u get it yet?
did you get it??
g4hardcore I did. If you check out Ramatorix channel I’ve commented on most of his videos with my experience with the board so far.
That scenery is beautiful
I’d like to know the temp after a hill climb vs Revel. Looks like the temp reading was still going up, after you read “49!”
Why not have a 4x4 DD option, for those that live on Streep hills? Less strain on individual motors + higher hill climb %.
Plus, with AWD, you can use Janux Quattro for 6” or 7” air filled, comfortable tires.
Hey fabi, can you make a video about the final version of the onsra blet?
just from my experience riding rollerblades, wheel materials can make ALLL the difference! Cool Vid!👍😎
Yup , the rubbr wheels are def. Soft and strong at the same time . I didn‘t even note that they are with Aluminium core when i ordered them 🤣 . The range might be a little less than the cloudwheels but when i wanna ride more like allterrain i def. Switch to them . They are almost noisy like the 97‘ ... cloudwheels are way louder but not that much . Got 43km/h with rubberwheels (on 10S BC) . You rock buddy
What are the black wheels ??
@@Triall00 i guess you mean the black rubber wheels with aluminium rims , they are strong and soft at all terrain but they will def reduce the range a bit ,but its ok . I prefer to ride the cloudwheels and not faster than 30km/h ,its really dangerous stuff and ain t worth it to end up in hospital or 6feet under ,even a protection kit will not provide a safe way of elektric skateboarding .
Hey Fabi! I weigh 190lb or 86kg and I really like direct drive over belts (in my mind it seems like less maintenance) but like the ability to use AT wheels with belt drive. What setup would you recommend?
Have you gotten an answer to this question yet? I'm torn between belt or direct drive lol
@@nuur2825 haven't yet!
The direct drive motors are so close to the ground. I don’t see them being less maintenance. If a motor goes bad it will be easier to replace a outrunner motor vs a direct drive imo.
@@enjoyesk8978 Being low to the ground is both exaggerated (that only meant something back when boards were often running smaller wheels under 90mm). Clearance hasn’t been an issue for awhile now.
As for maintenance - it’s hella easier. I’m constantly keeping crap out of my belts. Also I love the absolute quiet of dd.
So which one climbs better? Which one goes faster and has better acceleration? We saw just a temp comparison and it gives 0 information regarding specs of the board..
More info os coming soon. Overall the Belt board has more power though
3 years ago he said that he would never become a longboarder but now that’s all he dose 😂
Same story here :D Now I am addicted :3
So you mentioned a lot of differences with the wheels you use, but to go back to the title: what is better? Belt or hub drive?
It is direct drive not hub, they are both good. direct deive requires less maintenance, they are way more silent and they are less hot but they have less torque and if you change wheel size you will not be able to change gear ratios while the belt have more torque and you are able to match the power with any wheel size by changing the gears but they are loud, high maintenance and hotter. also you can see that the deck of the belt is longer, wider and more flexible while the direct is the opposite. hope I answered yout question.
Always a thumbs up for me bro, nice video to love your new boards🤙🤙
🙏🏼🙏🏼🙏🏼
Noisy skateboards have good points and bad points. They sort of ruin the ambiance of the trail... But in crowded situations boardwalks in town. They work to let people know you're coming up on them... Instead of ringing a horn or Bell... I scored a very cheap brand new electric skateboard. Super stoked. I almost bought your (fab board). It's a good deal on a stronger better board...but I so low on cash.to replace my blinkS2... So went for 200$ board.
Great Video, great Landscape, great new dual belt 🙃
Hi Fabi, könntest du das Onsra zusammen mit den grünen Cloudwheels, wie auf dem Thumbnail, nä. Frühjahr liefern ? Gruß, Mike.
You guys live in heaven...
Great video!
I know this is quite an old video but for the direct drive,
Is there a difference in range between the two wheel options?
Thank you
can you use a d shaped motor shaft so the pulley won't slip? Most pulleys start to slip on round motor shafts after some hard riding.
We use Metal pulleys this won’t happen at all..
Hi Fabi, what Adidas shoes are those you are wearing and those Onsra airless rubber wheels sound sweet😍
Which wheel has the longer life cycle? Cloud vs Rubber? Great video bratha.
I believe Cloudwheels will hold up longer but i have to do some more test definitely
So should I get the rubber wheels? The cloud wheels are really nice for the city!
The Rubber wheels just give you an even better riding feeling depends a little where you ride. 115mm wheels are currently sold out. Next stock should be here in two weeks
Fabi hey Fabi. I just ordered the belt driven version of the black carve with the rubber wheels but I think I want to use the cloud wheels. Can I just take off the rubber wheels and put on the cloud wheels or would I need different pulleys etc?
How long does it take to charge battery on board?
I have the Onsra belt-drive....and it takes about 3-4hours. 4 hours if it's totally dead
so the BELT drive. changing the smaller rubber wheels to the AT wheels doesnt need to adjust the motor position when switching the gear/pully????? pls confirm. if so, THATS AMAZING
good lord it's beautiful there. I'd be out cruising every day.
Around 6 min you say "It's a carbon fiber board, I know the difference". What do you mean by that, is the ride smoother? rougher?
It’s a lot rougher.. Also you hear the carbon during your rides i personally don’t like it. The wooden deck + carbon enclosure is much much better
Think you ever do pneumatic ATV wheels? Like the evolve ATVs
Yep coming soon 😁
Fabi will those AT wheels compatible with both direct and belt drive boards? Or do i even have to buy a new board, for those AT wheels?
Can direct drive with 115mm runber wheels handle dirt road?
I just ordered it. Also any maintenance or reliability issues?
Fabi! We are of the same weight, how many turns do you give the bushings nut?
keep up the good work ! i just bought ONSRA BLACK Carve direct drive 12s3p and i cant wait to have it xD do the 12s3p have the same range as the 10s4p ?
Just using math I'd guess the 12s3p would have roughly 10% less range than the 10s4p pack with the same cells. Your acceleration and climb will be out of this world though!
@JustTrying just bought the same setup last week,was hoping to find an answer for the🔋difference. 😂
Hi fabi....!!! Belt skateboard better or without belt sketeboard better ???
Belt motor bords are more versatile as you can change the gear ratio. Can tell you even more: ESK8europe@outlook.com
The real question is do you want to have to continue to buy belts and replace them when they go out. Now tell me which is better?
@@fabiandörig thanks fabi
Hey Fabi, i just got a vestar mini after watching your review! im in love with the board but its really hard on my feet when im not on super smooth roads. I was wondering if its possible to change the wheels on it and what wheels you would recommend.
Cloudwheel 105mm or TB 100mm. But you would need to consider if the wheels are too big if there is wheel bite.
What city is that ride in?
Hi Fabi! Quick question. How do I get my remote to display mph from kph?
You have to reconnect the remote to your board. You should find it in your manual
I really like that you start your Video normally now not with those Skipping in the middle of a video and then going back unrelated and back and forth.. New Style is better for sure
Hi Fabi, I just bought the b-side board! The Rocket Pro. Spec 50 km/h,50 km range!! You must test this board Man!!!! Its pure adrenalin!
Love the direct drive, but belt driven just seems more maintainable. Those motors are going to get knock out of balance and chewed up. Maybe ok with big off-road wheels
@mike h Ive bent many shafts on many motors
What? Why would they be any worse than hub motors, which would get knocked around WAY more and are considered reliable?
Nice!
can your wheels CARVE well?? enough hill tests lol
its hard to dump this money without anyone elses input. however, ill buy it if u provide me a decent coupon code
Nice one. Wish I can afford one 🛹🛹🛹 awesome review guys. Always wanted an electric. Amazing views. Great place👍
no one stoppin ya from earning more 💴💴💴
👍
When's flex comin
I have some issues with it. It’s overheating and not sure if i can release the video ^^
Sup fabi
gamezmeow what’s up 😎
Sorry for quality just wanna show the cloudwheels on AT at speed of 28km/h . Better dont drive faster on stuff like this 😉 . ua-cam.com/video/NT1V3gIr04w/v-deo.html
deutsch wer mir schon reichen :)
Everybody please please please wear a full faced helmet when using an electric skateboard. This should be standard. Half helmets are not enough. Please upvote this so everybody sees!
Why should it be standard? Not everyone is speeding along at 25+ mph. If you made people wear a full face helmet it will stop people wanting to ride e-boards in the first place.
@@christophermaitland4818 it's all fun and games until your face lands on the hard surface. It can happen to anyone.
@@mcul3474 agreed, that does not mean everyone should be forced to wear them though.
@@christophermaitland4818 for sure not forced but the culture of electric skateboarding should promote this.
Good luck with the girlfriend. 💐🍺🥨🍰
No luck needed it’s already over..
@@fabiandörig sorry to hear that.
I really like this board but the price keeps going up. Im trying to save for it dude. Stop raising the price please.
Hi fabi pls can you maybe gift me a skateboard my birthday is in a couple days😁
Hey Fabi what your take on the cloud wheels go
how's the grip on them?
I use cloud wheels and it's so much better than street one. Very good grip.
Nice!