In general... your right that XOOT_Pro can not adjust the screen's height as easily as monitor arms. You can adjust the screen height by changing the spacer under the arm per you work setup. See the "Leg Spacer Kits" at xoot.pro/product-category/modifiers But that's more of a one time adjustment....
Is the Xoot ever going to be available to buy? This is the only question that matters. I think you proved (a long time ago) the advantage of the Xoot but, at this point it feels more like a myth.
Hi John. Yes! XOOT will be available to buy in 2023, we're launching a pre-sale campaign (for long time followers) to purchase XOOT at a discounted rate. We're currently looking at a mid-2023 delivery. Once we identify the exact timeline, we'll share it on our website and on social media.
thank you very much for this video! very helpful. regarding the Cintiq pro 27 stand: does it wobble with normal use? (as in when handwriting really fast on the cintiq pro 27?) When do you expect to release your Xoot arm for the 27? I like the aesthetic of the cintiq stand, I hope newer Xoots will have that modern monitor stand aesthetic
Yes the Cintiq Pro 27 Sand does wobble. However, if you keep one hand on the side of the screen while drawing with the other it helps to control the wobble. Yes we're looking at making a second version of the XOOT arm for smaller screens. That will have a different look.
I had 3 generations of Cintiqs by this time. While other ergo stands were very good, this one is TERRIBLE and a dealbreaker for the new model until I have a good solution. It doesnt even let you adjust the display so that the bottom edge of it rests on the desk (what the actual f....? how did they green light this design???)
Since the launch of the new Wacom DTH-271 stand, I've been sceptical about that Wacom BORROW your team's design of stand due to the similarity of the two stand. Wacom should be shamed on that. I do understand that the two stands are not exactly the same but I do believe that Wacom BORROWed your ideas. (you probably get my point of "BORROW"). and I'm wondering when will be the date that our customers can buy your stand? we just can't wait! Wacom always asks some manufacturers in China to make OEM production. Will your team consider to find a factory in China to do mass production since materials and labors in China are much cheaper than developed countries? I'm looking forward to your reply, sir!
Good news, for you then. ---- We expect the store at xoot.pro to go live in January 2024 ---- I've been VERY quite the last year and a half. This was intentional, I was tired of always posting "We're getting close!" only to have to roll back my statement the next day. The manufacturer and I thought it would be a 6 months to have units ready. The real time was almost 2 years. I'm Sooo glad I did not try and crowdfund this! It would have been and endless chain of disappointment emails. This also allowed time to ensure things were done right. It should be reflected in product quality. Overall, I quite proud of the final product. Now it's up for others to judge...
Hi Kelvin, XOOT_PRO will be available for pre-sale in the upcoming months. We're estimating to start delivering to customers in mid-2023 (dates could move up or back, so follow us on social media to stay in the loop!)
I like you're unbiased approach within this video. Really trying to be objective and honest. Kudos for that!
Keeping it real!
Glad you liked it tho!
the xoot makes the cintiq stay too low near the table. People want to use cintiq as a regular monitor need the ability to set it up higher.
In general... your right that XOOT_Pro can not adjust the screen's height as easily as monitor arms.
You can adjust the screen height by changing the spacer under the arm per you work setup.
See the "Leg Spacer Kits" at xoot.pro/product-category/modifiers
But that's more of a one time adjustment....
wondering if there is a way to convert the new cintiq stand to be used on a 24 - seems like such an obvious courtesy they could have provided
Is the Xoot ever going to be available to buy? This is the only question that matters.
I think you proved (a long time ago) the advantage of the Xoot but, at this point it feels more like a myth.
Hi John.
Yes! XOOT will be available to buy in 2023, we're launching a pre-sale campaign (for long time followers) to purchase XOOT at a discounted rate. We're currently looking at a mid-2023 delivery.
Once we identify the exact timeline, we'll share it on our website and on social media.
is xoot compatible also to huion?
Sir, I really doubt that the design team of the new Wacom Cintiq Stand "BORROW" ideas of your XOOT, how do you feel about that? They look so similar!!
I doubt I show up on Wacom's radar.
I think it's more function dictates form.
I notice there was no price point comparison for the consumer to decide which best fits their budget. Do you have that information?
thank you very much for this video! very helpful. regarding the Cintiq pro 27 stand: does it wobble with normal use? (as in when handwriting really fast on the cintiq pro 27?)
When do you expect to release your Xoot arm for the 27? I like the aesthetic of the cintiq stand, I hope newer Xoots will have that modern monitor stand aesthetic
Yes the Cintiq Pro 27 Sand does wobble. However, if you keep one hand on the side of the screen while drawing with the other it helps to control the wobble.
Yes we're looking at making a second version of the XOOT arm for smaller screens. That will have a different look.
@@xoottube Thank you! looking forward to your creations! with all the support and respect there is!
I had 3 generations of Cintiqs by this time. While other ergo stands were very good, this one is TERRIBLE and a dealbreaker for the new model until I have a good solution. It doesnt even let you adjust the display so that the bottom edge of it rests on the desk (what the actual f....? how did they green light this design???)
Since the launch of the new Wacom DTH-271 stand, I've been sceptical about that Wacom BORROW your team's design of stand due to the similarity of the two stand. Wacom should be shamed on that. I do understand that the two stands are not exactly the same but I do believe that Wacom BORROWed your ideas. (you probably get my point of "BORROW").
and I'm wondering when will be the date that our customers can buy your stand? we just can't wait! Wacom always asks some manufacturers in China to make OEM production. Will your team consider to find a factory in China to do mass production since materials and labors in China are much cheaper than developed countries?
I'm looking forward to your reply, sir!
Good news, for you then.
---- We expect the store at xoot.pro to go live in January 2024 ----
I've been VERY quite the last year and a half. This was intentional, I was tired of always posting "We're getting close!" only to have to roll back my statement the next day.
The manufacturer and I thought it would be a 6 months to have units ready. The real time was almost 2 years. I'm Sooo glad I did not try and crowdfund this! It would have been and endless chain of disappointment emails.
This also allowed time to ensure things were done right. It should be reflected in product quality.
Overall, I quite proud of the final product.
Now it's up for others to judge...
I should also state the the Cintiq Pro 27 Kit is done!
See: xoot.pro/product/xoot-system-with-wacom-cintiq-pro-27/
Where to buy how much
Hi Kelvin, XOOT_PRO will be available for pre-sale in the upcoming months. We're estimating to start delivering to customers in mid-2023 (dates could move up or back, so follow us on social media to stay in the loop!)