BMW 335D Emissions Delete
Вставка
- Опубліковано 9 лют 2025
- Walkthrough on emissions deleting a BMW 335D
Things need just to delete the emissions components
DPF Delete- www.tunemyeuro...
EGR cooler delete-www.tunemyeuro...
Swirl Flap Delete kit-www.tunemyeuro...
Things recommended to replace if you are going to tune it for more boost and hp
Charge air hose at throttle body-www.tunemyeuro...
Charge air hose between turbo and intercooler-www.tunemyeuro...
Things recommended to replace as maint. around 100k
Glow plug controller-www.tunemyeuro...
Glow plugs-www.tunemyeuro...
Thermostat-www.tunemyeuro...
Crankshaft pulley-www.tunemyeuro...
Fuel filter-www.tunemyeuro...
Serpentine Belt-www.tunemyeuro...
A/C Belt-www.tunemyeuro...
They also sell a kit for 100k maint. that is a little more extensive
www.tunemyeuro...
Dude, thanks for listing all the parts! Saves me a lot of searching.
Best video yet on intake manifold removal!
BY FAR THE MOST DESCRIPTIVE VIDEO LIKE THIS SO PEOPLE SEE
The harmonic damper is fitted free by BMW as it has a Recall on it
You deserve more subscribers just for this video, amazing work and well explained
Thank you so much 😀
I did the same to my 635d results were amazing
Huge resource 335d
No throttle body on a Diesel. Probably an anti shudder valve to prevent dieseling after engine is shut off. Good video so far.
Diesels with emissions use a throttle body that is opened all the time and is gradually closed to create vaccuum in the intake to suck up more EGR, diesels need this since turbo boost will blow EGR out if the intake manifold. 6.7 Cummins, Duramax and many other diesels have a throttle body for this same purpose. The 335D has a throttle body. Notice how the EGR inlet pipe is between the butterfly flap and the intake manifold
Great video! I didn't expect all the crack but I guess it's part of leaning over cars! LOL
Where are you located?
Most sleeper Bmw ever made. Can’t believe how cheap these things are
i just bought a 2011 for 7600
I just bought my 2009 yesterday for 5100 bucks!
I just bought a 2010 335d for $4000
@@Cor13z miles?
Just picked up a 2011 for 1200! Had a stuck injector. They thought it was a rod knock. Put some hotshots secret in and fixed the injector.
How do u change wiper blades?
Hey what sensors did you have to plug back in after putting the cat less downpipe off?
Only installed the oxygen sensor and one egt sensor in the new pipe.
What sensors do I leave in place when I remove the dpf? My down pipe is just like yours, however, there's 3 sensors and are 14mm headed. Do I leave the upstream sensor and remove the bottom 2? Also the rear 02 sensor stays out?
Leave the upper 02 sensor and the first temperature sensor. Everything else gets tossed.
Im new to this, just bought a 2011 bmw 335d and im having issues with the dpf so would it be worth it to clean it or what do you recommended. Im located in Georgia you think i can take it to you
There are cleaning methods out there. I have never used any of them. I've only ever deleted them. And I think I may have replaced one under warranty when I worked at the dealer. I would be more than happy to help you out with it. If you need to contact me about service inquiries, email me at csautoworx1@gmail.com.
Great video! Do you know by chance if anybody in the Las Vegas area could do this job?
I do not
Hey Munky and all other viewers of this clip,
I got a BMW 325D -06, enginecode M57TUD30, with a mileage of nearly 450000km..
What's sad is that i dunno whats done to it, all i know is that the DPF is gone, and maybe the swirlflaps..
The regenerate-light sometimes lights up, is that because it's not truly deleted from the cars software?
It's time for the yearly inspection in 23 days, and i start to panic a bit xD
PLEASE, reply and help me!
@MunkysGarage do you need a tune for just the flap delete?
You don't NEED it. You will have w check engine light without a tune. But it will still drive normally.
@@MunkysGarage thanks a lot
After the tune did vehicle run drive cycle without a problem or does it show certain moniters incomplete even after driving the vehcicle
It will show the components removed in the delete as being n/a when checking the monitors. So the computer is no longer looking for them when it does a drive cycle.
How much to do all this because I have one that is about to hit a 100k
It's about $3k for parts, labor, and the tune.
Hi again! Have you ever had one where the throttle on idle constantly opens and closes? If so do you know what causes it? Thanks
I have never seen that. Is it causing a surging idle? Or any other issues?
@@MunkysGarage yeah like it’s hunting! I’ve seen a few cars like this now and all 3 that I looked at to buy did it!
Two questions how long can this take for someone with some good car knowledge and tools and what would this cost your price ?
With basic car knowledge this whole process is a weekend job. As far as price goes it can vary depending on if you are providing the parts or if I am sourcing things. It ranges from around $800 if you provide the parts to around $3000 if I am sourcing parts.
@@MunkysGarage After you change the parts, is a tune necessary? If so, how much does that cost and can only an expert shop do that? Will the SES light be on forever after a delete? Thanks!
14:04 being able to look at this image as a 17 year old and know what is going on really gives me hope for myself lol😂
Great if your state has no inspection?
Yeah only works in states with no inspection. Diesels in NC are a safety inspection only, so they don't check for emissions components.
can this vehicle now run completely on biodiesel b100?
To be honest I am not sure. I would have to talk to the tuner about that.
They recommend no more than b5, so not sure what you can do if it is tuned.
Technically no. While the deleted emission equipment will no longer be affected by the fuels emissions the injection system is under high pressure and won’t atomize B100 correctly and will do damage. On the other hand if you can come across renewable diesel (common here in CA) that you can run 100% with or without oem emission equipment. It’s 100% compatible with dpf/scr and the injections system.
@@rubensalvatierra6825 I never knew about renewable diesel. I just jumped on google now to learn about it. I always assumed Dpf/egr was the only reason modern diesel engines can't run b100. At least that's what many articles on the internet suggest. Thank you
bio diesel is wack. get some race diesel
Where is the parts list mentioned in the video? Trying to find the pipe from the intercooler to the intake manifold. Thanks!
Sorry I forgot to add the parts list. I will get it added and update the video.
will the car be able to pass smog after the emissions delete
No it will not. We do not have smog test where I live.
@@MunkysGarage dam suck a cool mod to keep the car reliable to bad i live in California
Someone please tell me who can perform this on my 2012 X5 xdrive35d in San Diego?
yah i need to find someone in Northern California
Have you found anyone ?
i can, im in orange county
Do you also remove the def fluid system ?
Some of the cars I take it out. Others I just leave it in and drain the system. I usually leave that up to the customer.
Can you add the parts list and cost, I’m wanting to do this to my car I just bought.
Did you do it ?
How do these cars pass inspection? A great motor chocked by idiots at EPA's New supporter here returns the connection.
NC only has safety inspections on diesels.
I have a 2018 328D. what can be done to it to make it breathe better, perform better and have less emission issue popping up with something breaking down?
The n47 engine that is in that vehicle up until now has not had a whole lot of issues. There is a recall for the EGR cooler leaking which can cause the intake manifold to melt due to hot coolant getting sprayed into it. But other than that those cars don't have a whole lot of problems. Granted they don't usually have the mileage that the older cars have. But the older cars had problems with emissions stuff almost from the beginning. As far as performance stuff, tunemyeuro.com has a DPF delete downpipe and performance software kit that they claim is good for +45hp and +90tq. That is the website we used to purchase parts for the work done in this video and the only one I have experience with as of right now.
How much hp does it have? 328d? Wtf is this car, i only know about 328i
where are you located?is there somebody who can do it in PA?
I am in NC. Don't know of anyone that does it in PA.
After deleting the egr my car runs terrible at partial throttle. Lots of blue smoke and misfires. But it's fine on boost
Good, maybe you should put it back, it was there for a reason.
@@fasteddy664 sorted it out in the end. Just needed to delete the DPF and apply stage 2 remap. Lots of black smoke but rapid now
@@RichPurc Better off buying a decent car to begin with!
@@fasteddy664 haha knew I'd trigger you. Sorry, son.
@RichPurc haha not triggered at all You could spend another 10k on adding parts, still won't keep up with my M5 or sound as good 🤣
Great job. How much are we talking about and where is your Shop? I have 2 of these beasts and I want to unleash those engines power for sure. I will keep one to drive until dies and will storage the other one because I know this particular model will be worth a lot in 20 years.
Price depends on how much you want to do and what parts you want to use. Email me at csautoworx1@gmail.com and we can discuss more.
what about the turbos? Can this be done in California???
Turbos are stock. This vehicle has a compound turbo setup and the large turbo flows pretty well. I highly doubt this is legal in California. I also doubt if you did it illegally you would get away with it long before getting caught. I don't know much about the emissions stuff out there but I know it is very strict.
@@MunkysGarage darn there goes that purchase
Does the car throw codes for the swirl flap delete?
It would in my case because the intake I swapped onto the vehicle that had the swirl flap delete plates pre-installed also didn't have the swirl flap motor. So it will set a fault when it doesn't see the motor connected. I'm not really sure what would happen if you installed the delete plates but left the motor and left it plugged in.
it’s not supposed to if you leave the motor connected
@@MunkysGarage In my 2006 E320 CDI you can buy a resistor to put it on the cable that goes to the motor and will think that it is actually connected.
How much was the labor on this?
It varies by what exact parts are involved. What was involved in this video I charge $400 for. Mind you I don't have a shop or overhead to deal with. So shops will most likely charge more.
Are you available in NC?
Where’s the overall sound of the car????
RandallTheChef I was looking for this also, there was a pre delete sound but no after 🤷🏼♂️
Where’s the video of the dpf delete buddy?
ua-cam.com/video/yZBcV4HAaEg/v-deo.html
great vid but the music is way too loud
Best thing that you can do to the health of the car
As long as your state does not have inspections
@@psmh4 true
Bro ur f.... Good man!
With all the "delicate" glow plug videos and risks of breaking them off, it seems pretty ballsy to just go after it with a good old hefty twist. And no torque wrench for install. Warm engine? Penetrating lube?...I am thinking of buying one of these, and they all have 100k miles and no adds say they have done any of this maint...no wonder people ditch them!
I have done more glow plugs than I can remember and have never had them break off. Never heard off anyone ever breaking a bmw glow plug. It was a cold engine and I didn't use any penetrating lube. These engines have there maint. requirements, as do most engines. But they really don't "break down" and leave people stranded. Most of what fails on them is the emissions stuff. Which never causes an issue with the driveability. Just check engine lights.
@@MunkysGarage Beautiful response
@6:27 shit gets serious when the crack comes out
Not hating great video i subbed
What are these worth?? I have a 2010 that is getting all these same mods done including tune. Im going to be making videos of my progress up until final sale. Its a one owner but not really sure what they are worth all done up ready to go. Here is a video of what i got for sale. ua-cam.com/video/iEuf-KWHp7k/v-deo.html
🥰🥰🥰🥰🥰🥰🥰🥰😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍