How to fix camera flip screen not working
Вставка
- Опубліковано 5 січ 2025
- Easy way How to fix camera / camcorder Flip screen: LCD, touchscreen, buttons not working, easy common repair for Sony handycam, Samsung cam, Canon camcorder and more flip-screen cameras.
Can't believe it! So great! Thank you for making the mysterious problem so solvable, and for showing us in such a clear, simple way. Bravo!!
I have a Sony Handycam, model DCR-HC21. I followed your example and did the three ribbons you show twice and it didn't work either time. I then noticed 3 other ribbons and then did all six and made sure to push them in really snuggly. Perseverance pays off. It worked! This is very important to me as I use this camera to convert family videos of my friends to DVDs (editing in chapters even). Thanks so much!! You saved me a lot of aggravation.
I got the same model and problem, every time I push them and close them in place it still doesn’t work. Any tips?
I might just try pulling them all out again (& again) and making sure they are pushed in securely. I found that it was so touchy that the slightest difference might make it work or not work.@@aidencarroll8039
Thank you for your timely and very informative video. It was significantly helpful and solved my problem as well. I want to add a couple of points to your offered points which are: first that the cables could be hot-glued or tapped and what I did was glue them once they were in. And secondly, the first two attempts were unsuccessful as you suggested with those two cables, but there is another cable -- once I removed that and put it back, it worked like a charm which should be credited to your video. Thanks again
Good tips
Great , quick, clear, easy, HELPFUL demo! Thanks, man!
Did what you recommend on a Panasonic sd90, managed to get the back case off, but the ribbons were tiny and looked very delicate, so I just opted for a spray of WD40, and the result?..........Magnificent success. Kudos to you Tampatec, round of applause from me.
You saved me from buying another handycam. Thanks a lot!
Thank you. Your technique offers me a start on resetting the touchscreen on my XA10.
I will try it. However, in the past years, my camera endured extreme abuse. It hit rocks on Kilimanjaro, got stolen and thrown in a Nairobi township, soaked by rain in the Czech Republic. I hope I can reset the screen. I shall return to update if successful -- or not.
Thank you.
its been 5 months did you fix it or nah
weird flex but ok
THANKS A LOT! Simple and easy to fix, another video tutorial says to replace the flex cable or the LCD and I almost mess my camera, thanks I watched your video and I fixed it. God bless you my friend.
Thank you for this video - I have a sneaky feeling that this is what has happened to our HDR-CX105. The only question I have, is to check how to remove the rear cover from the flip-out screen on this particular camera?
I can see that there are two small Philips-head screws on the inside, which are awkward, but just about ok to get to - but can't see any others! I'd like to know exactly how the cover is secured on, as I didn't want to break anything inadvertently.
Thanks once again for sharing this ribbon tip.
I had high hopes, but alas. All the cables look fine when I removed the back, so there was not anything to fix. Buttons still not working.
Unfortunately, this solution didn't work for me either. My ribbon cables all seemed tightly connected, but I re-seated them again anyways. Looks like I'm off to hunt for a new camera. I appreciate the video you made though as your instructions were clear and easy to understand.
Thanks for this. I may just solve the problem I'm having. Seeing how easy it is gives me the courage to try it.
Excellent video, BIG Thank You ! My old 2004 Sony DCR HC20 touch screen works again, now I can continue converting old MiniDV tapes to my computer !
This Fixed my Sony Handy Cam!!! wow thank you broski!!!!
🙏 thank you so much for your useful tutorial ... Good luck ... Sir 🙏✌️
Nothing to lose so I'm definitely trying this. Thank you
What DVD burner for a MAC computer, do you recommend? After transferring VHS home movies to digital, I want to put them on DVDs. Thank you
Thanks for the tips. I just fixed my Handycam with this, the same model as you have.
Dude, you are the man! It fixed mine thank you so much.
Your videos teach me so much I'm leaning a lot.. Thank You👍
that's awesome, thanks jason
GREAT VIDEO. NOW I CAN GO TO THE CINEMA AND PIRATE SOME MORE FILMS. GREAT
+mike gold no prob but I wouldn't use the flip screen may attract unwanted attention 😉
any ideas on where replacement touch screens can be found for a similar Sony handy cam? thanks for the how-to
Here is a BIG thumbs up. Thanks
Thanks a million. God bless you
Hello , thank you for the great video.
However in my case, I have this exact model, the touch screen buttons , still are not working on the screen, the left regular buttons are working, do you have any recommendations for this ?
Thanks in advance for your time.
I just solved problems of mine by removing all cables( Not only two but 3) from it and reinstalled them. After that, I made sure the wires are tightly inserted and then by using regular constant glue it stayed there. Also, I did reset the camera itself by pressing that tiny hole using a sharp nail a few times. Good luck
Omar Ali hello, i know, i know it's been long time, but does it still work?
Hey bro your vids are super cool,
Please please make a video on how to fix your handycam if your cassette is not ejecting and cause bootup problem.
I just tried this with my Ordro 4K Camcorder. I believe it's made of Chinesium. It worked great. The ribbon cable had come out completely.
Brilliant. Thank you so much, helped me fix my Lumix G7 DSLR screen. :) W.
Hi! I have a Sony DCR-SR50 that it works well but the LCD screen looks a lot blurry... Do you know how can I fix that?
Or better said... The workaround you show will work as well?
Sadly this didn't solve my problem (but thank you!). Do you do repairs, or you refer me to anyone?
Excellent!! thanks
Thank you for the video, I am now going to see if I can fix the flip screen on my camcorder.
Oh Man, You Rock!
Thanks
Thank you so much! Great video!
Thank you! Nice video.
The big ribbon from the camera to display carries enough tension on the curve to pull loose from the clamp over time, due to opening and tilting of the screen. Yes taping ribbon flat just infront of clamp will keep it from moving 👍
I have a similar problem with one of my old cameras (Sony Handycam HC28). readjusting the cables didn't work. I have a feeling the flex cable itself is broken somewhere. So I have ordered a new part and will have to install a new one.
Hey there, did that ever end up working? I have a HC28 as well, reseating the cables worked for 2 months but now its back unresponsive. Wonder if I should look for a new cable.
@@PurpleCar3000 Actually yea replacing the flex cable fixed the issue!
Thankyou for the advice it really works
Should i pull thecalbes for the button out? How do i pull the cable for the touchscreen thingy
Thank you so much. This did the trick
The third ribbon you removed...i could not see very well when you removed it, which way do you open the 'lock' on it? The other two I was able to get...
You need to drag the grey, small thing towards the main body of them camera. Hope it helped!
Did this my button buttons still won't work for the clock set and play and rewind features
Hey, don't give up. I tried several times and it didn't work and I kept doing it and it finally did work. Do all the ribbons you see, not just the 3 in the video. Make sure they are snug and aligned. Good luck!
Another good fix it. Thank you.
you sir, are great !
I have a Sony handycam dcr-sx63 that has a flip screen that will not close all the way. Can you help? Thanks.
Would this resolve the screen turning purple issue too?
Sachin
The View Finder displays black and white parallel lines and LCD screen of my Sony DCR TRV 355 e display blank blue screen. Could you please suggest the solution to this. Otherwise my camcorder records images and videos and also displays recorded images and videos on my PC through Image mixer software.
Two of the ribbon ports don’t have latch doors and don’t want to come off. It looks like the ribbons are secure there. I reinstalled at the other 4 ribbon ports and it didn’t work unfortunately.
hope God proteeecct you my friend good good help, I learn a lot from you merci.
+Wilmarc Louis Jean thanks
How to fix rhe flip screen if it doesnt show anything when you on it.its a sony dcr-hc32
I've got a JVC Everio with the same problem, no visible screws.
There are some screws on the side if I take the connector pivot cover off.
I have a JVC GZ-MG50U and when I open up the door everything around what would be the picture is visible but it doesn't display what the camera is pointing at. Any suggestions?
Yup. Re-seating cables in electronics repairs are always first remedies.
I tried with mine but the cables/strips are quite tight and stable already... so I couldn't really do anything not fix my camera :( I was really hoping your video would help but nada. Everything works but the buttons on the LCD do not respond. Do you have any idea on what I should do next? take it to a shop?
Thanks for the video anyway 👍🏼
Any luck yet? My buttons are not responding either but the rest of the camera works. I broke a piece while doing the video repair. Just hoping it's user error and still fixable.
Hello, i know i know it's been long time, but did you repair it?
old credit cards are handy tools for splitting plastic cases apart without doing any cosmetic damage.
well, I can't seem to find the repair video I need. I've seen it, I can find it by others that are 23 min long! I have an ipod touch four that won't hold a charge, can you tell me how too find that episode???
The ribbon cable sockets are glued on. I popped the big one off the board while trying to open the clamp-oops. Devil to get it back correctly. No more LCD light.
Can you fix mine if I send it to you. This is the same camera
I have and the touch screen does not work at all.everything else works fine.
I don't know anyone who can fix it.
Any tips if the screws are so tight to loose them?
You must be using the wrong size Phillips micro screwdriver. Any difficulty taking these micro screws off is likely due to the tool you are using. If you use the wrong size Phillips screwdriver, you can damage these screw heads very easily. And then you will have a heck of a time removing them.
I own a sony DCR-HC21 handycam from 2005, I did what you did and it didnt work for me :\ When I go to calibrate and touch on the screen the ''x'' are moving so I know the touchscreen is working, but when I need to use the touch screen it doesnt work.. do you know what could be the issue, thank you
Qué amable que se toma el tiempo para compartir sus conocimientos. Es difícil encontrar información por lo mismo de que son cámaras ya obsoletas. Mil gracias!
Hello...plz can you help me.. I have the older camera and the film didnt work when I put it in the camera it dont work do you know how to fix it?
Sadly, as excited as we were to try this, it didn’t work for us. I was trying to watch my son‘s baby in little kid videos for Mother’s Day. We followed the instructions to the t but nothing. We welcome any further advice! Thanks!
Bcoz of u I can watch my childhood
Thank you
how can i fix the screen to my fujifilm hs 55 exr?
Bro, thanks
nice job
I have the same camera here. My screen was blue but the buttons wouldn't work. I followed your instructions but now my screen is white. The mistake I made was when I pulled the lever to remove the ribbon that controls the buttons on the front, the piece came with it. Now, I am a fix it but not a techy. Can I just solder that piece back on or do I need "special electronic soldering stuff"? Or do I have to buy a new circuit board? Help!(I just want to transfer these home movies and the only way to control the camera is thru the touch screen!)
I'm sure I can do this but can't get the back off... found two screws but no more and its stuck at one end ??
any one know how to fix black screens in this hi8 cameras it only records the audio.
Could you help me? My camcorder does not turn on. It is a vixia r400
I have a Samsung HMX - F80 Cam recorder and my screen won't come on. Any ideas why. Power works and battery is charged but the screen stays dark...
how do you fix if the flip screen is lose flips open and close no resistance
I own a JVC GZ-V500BU. My screen starts "scrolling" downwards constantly . Anyone had this problem or knows how to fix it?
the buttons still won't work
Hey, don't give up. I tried several times and it didn't work and I kept doing it and it finally did work. Do all the ribbons you see, not just the 3 in the video. Make sure they are snug and aligned. Good luck!
plan and simple. i have a problem with casio camera because my zoom in and out is not working at all!
My flip screen powers on, have writing on it, but the background is black i can't see what is being recorded in front of it, any suggestion please?
Currently experiencing my screen acting up on my canon vixia mini X when I try flipping it to “selfie mode”😭😭😭
Plz.tall me my handycam still not working what problem?
i ll try it for my JVC GZ ry980 ....
IM THE 100 COMMENT
even after doing everything here it still doesnt allow me to use the touchscreen (the buttons work and i own a Sony DCR-HC26)
The video was very helpful but I can’t see through my lenses
What do you do if your screen is cracked only please?
I knew it had to be a ribbon cable gotten loose, I just couldn`t find the hiding spot of the screws on the inside.
If you wouldn`t have showed me I would still be searching.
I love :)
what
The
Fack
Mine won’t turn on
Tried reconnecting all cables twice now, and this fix did not work.
Mine doesn't work
What do I do ?
What to do if display not working in canon Dc 320 camcorder camera...... How to solve the problem....... I can only see images in lens..... The display not working at all.... Plz help me to solve this problem....??
I tried this over and over some buttons still not working 😕
Can't find reset button also
Hey my Samsung will flip screen will not close. It just pops open (flaps back and forth) What can I do? Thanks in advance.
Please let me know if you have solved this issue
it started working better first, but then got dark and would not come back to life (
not everyone has that kind of camera
I followed your instructional video on the same camera I have and my screen still doesn't work. Do you have other suggestions?
Can someone help me. My camcorder is just a black screen how can i repair it.
im so bad speaking english but pleasee help
bro its not working plzz help me
Here 2019
Still not working
:(