I actually have the comfort seat and I don't find it comfortable at all. I will actually be taking it off this weekend and replacing it with a custom seat. I appreciate the video because now I know what the clips look like. I will lift the shell using your other video as a guide. thanks
Thanks for the support I really appreciate it and don't forget for any accessories and tuning devices you can always go check out our website we have lots of stuff for the ryker... www.blrtuning.co
If you take a look at my UA-cam channel I do have an install video it takes about maybe 15 minutes. Very easy all you need is a spring puller for the exhaust springs and a 15 mm socket. I don't know how the pricing is for a Canadian purchase but you can check out the exhaust over at my friends at www.blrtuning.co
Nice but seems a little costly. I had an Arlen Ness front and back seat with a back rest for my Valkyrie! It was expensive too but it was comfortable all day long and the backrest oils be moved to the drivers seat when my wife stayed home. Nice upgrade, good stuff cost money! 😉
The comfort seat was easy to install. The only question i got is does the comfort seat lift up a lil bit after being installed? I mean towards the back towards the passenger side. Mine does a lil bit and makes almost a clicking sound but its not broken. I pushed the seat all the way down and i even sat on it. I wonder if thats how its supposes to be!!!
Hey Bill! Awesome install video! I agree this vid was VERY needed. It seems like most have a difficult time (I think the directions on most Can Am products) are not great. I would love to get your feedback after you have ridden on it for a while. It has mixed reviews. Some say the small comfort change doesn't match the huge price. Others swear by the seat!!
I will have the bike back in a couple weeks it is getting some new custom items that I am not allowed to talk about done to it.. all will be revealed very soon.. I'll let you know after I ride on the bike for a little while..
@@scott-lc8xc yes the new comfort seat both passenger and rear are very much worth it extremely comfortable after a 2-hour ride night and day difference
@@BLRTUNING Thanks man. Also wondering about the seat height. I have the 1-Up back rest and have been reading that this seat sits about 2" higher than the stock 900. (non Rally) Since the 1-Up is small to begin with, wondering if that will make the back rest uncomfortable as it already sits low. Thoughts?
Is the passenger comfort seat have the same install method? I have the stock passenger seat with the foldable back rest. I really hate to remove the passenger pegs and reinstall them on the new seat.
Not really. It doesn't really lift you up at all or anything like that it's just got a little bit of extra padding. It's quite a bit more comfortable but it's not going to change your seating position
Great install Bill. I love the tip about pinching the clips with a rubber band to reinstall the seat. I need to get a comfort seat soon. I am waiting to see if a better aftermarket one comes out that is less expensive but the original comfort seat is really good. I may bite the bullet and buy one.
Bill, after about a year, how has the comfort seat for you the driver and the passenger held up? Has it met your expectations or have they disappointed you with the comfort level?
The comfort seat is a huge upgrade from the stock factory seats that come on the 900 or the 600 model I would say the comfort seat is even better than the stock factory seat that comes on the rally model as well... Well worth the investment my butt seems to like it..
From my understanding and from what I've experienced the only way to properly do it is to open up the clamshell body it's kind of a pain in the rear I wouldn't try it any other way though as I've seen a lot of them get torn and destroyed trying to not do it that way..
Yes you will have to open the clamshell body to release the clips from underneath.. I have a UA-cam video showing how to open the clamshell body.. ua-cam.com/video/Mktcr29nDZQ/v-deo.html if you like the content on my UA-cam channel please consider subscribing..
@@jasty9335 the passenger comfort seat would install exactly the same as the stock factory rear seat. I have the comfort seat as well and as long as you push down firmly and then shove it backwards sometimes you have to actually slam it backwards then it will latch correctly
@@brittanywood6275 no problem have a great day and don't forget you can always take a look at our website we have lots of products available for the Ryker.... www.blrtuning.co
The stock seat that comes on the rally and the 600 and 900 are plastic clips or basically like a foam material that is easily to move around and get them off the ones that come on the comfort seat are metal
Sorry about that I guess the link is not in the description below the video. I will update that so it's back in there I think it's because they removed it for a little while. But here is the link on Amazon to the same product I'm showing in the video for the drivers comfort seat... www.amazon.com/Ryker-Black-Driver-Comfort-219400795/dp/B07L9FF3Q2/ref=mp_s_a_1_18?crid=1XGDF2YTXJPQZ&keywords=Can-Am+ryker+driver%27s+high-end+seat&qid=1655559029&sprefix=can-am+ryker+driver%27s+high-end+seat%2Caps%2C150&sr=8-18
You have to open the clamshell body.. then you have to release the tabs from underneath if you try to pull it up any other way it will most likely rip.. I have a UA-cam video that will show you how to open the clamshell body.... ua-cam.com/video/Mktcr29nDZQ/v-deo.html
It all depends on the backrest. I don't know because I haven't used one of the driver's backrest so you'll have to do some further research. I know some backrest will work with the seat and some will not
Great looking Ryker. You made the install look really simple. Great tutorial. Thank you.
Thank you for stopping by the channel
I actually have the comfort seat and I don't find it comfortable at all. I will actually be taking it off this weekend and replacing it with a custom seat. I appreciate the video because now I know what the clips look like. I will lift the shell using your other video as a guide. thanks
what kind of custom seat are you going to replace it with ? I was looking at a Corbin but it is over $400.00
Hope to hear how comfy that seat is. Contemplating getting the comfort solo seat for my 900.
Thank you!!! Very easy install!
Thanks man. Just used this to replace my seat. Made it simple.
Glad I could help
Just watched and #subscribed. Your Ryker looks great! Will be joining the Ryker Club soon.
Thanks for the support I really appreciate it and don't forget for any accessories and tuning devices you can always go check out our website we have lots of stuff for the ryker...
www.blrtuning.co
Cool, I'm sure the seats 💺 are worth the money
Great video thanks so much for sharing!
Super helpful, thanks! Worked like a charm.
Thank you brother😢 for making it easy :
No problem
Bill you are the man!
Thank you for the info.
The dealer wanted to charge $450 to install seats on my Ryker.
Yeah it's expensive. We charge $125
Salut Biil,j'adore ton système d'exhaust treal!est-ce que c'est facile à installer ?
Et combien ça coûte en canadien ?
Merci
If you take a look at my UA-cam channel I do have an install video it takes about maybe 15 minutes. Very easy all you need is a spring puller for the exhaust springs and a 15 mm socket. I don't know how the pricing is for a Canadian purchase but you can check out the exhaust over at my friends at www.blrtuning.co
Nice but seems a little costly. I had an Arlen Ness front and back seat with a back rest for my Valkyrie! It was expensive too but it was comfortable all day long and the backrest oils be moved to the drivers seat when my wife stayed home. Nice upgrade, good stuff cost money! 😉
The comfort seat was easy to install. The only question i got is does the comfort seat lift up a lil bit after being installed? I mean towards the back towards the passenger side. Mine does a lil bit and makes almost a clicking sound but its not broken. I pushed the seat all the way down and i even sat on it. I wonder if thats how its supposes to be!!!
I have not experienced this issue
Hey Bill! Awesome install video! I agree this vid was VERY needed. It seems like most have a difficult time (I think the directions on most Can Am products) are not great. I would love to get your feedback after you have ridden on it for a while. It has mixed reviews. Some say the small comfort change doesn't match the huge price. Others swear by the seat!!
I will have the bike back in a couple weeks it is getting some new custom items that I am not allowed to talk about done to it.. all will be revealed very soon.. I'll let you know after I ride on the bike for a little while..
BiLL Ramseyer ooooh exciting!!
@@BLRTUNING Ant thoughts on how the new seat feels? Worth the money?
@@scott-lc8xc yes the new comfort seat both passenger and rear are very much worth it extremely comfortable after a 2-hour ride night and day difference
@@BLRTUNING Thanks man. Also wondering about the seat height. I have the 1-Up back rest and have been reading that this seat sits about 2" higher than the stock 900. (non Rally) Since the 1-Up is small to begin with, wondering if that will make the back rest uncomfortable as it already sits low. Thoughts?
Is the passenger comfort seat have the same install method? I have the stock passenger seat with the foldable back rest. I really hate to remove the passenger pegs and reinstall them on the new seat.
The pigs that come with it are exactly the same the install is exactly the same
Does the comfort seat give any extra leg room? I want the solo, but they made it incompatible with the max mount 🤦🏼♂️
Not really. It doesn't really lift you up at all or anything like that it's just got a little bit of extra padding. It's quite a bit more comfortable but it's not going to change your seating position
I have a 2019 Ryker Rally I was riding last night and I kept hear a steady buzz coming from the bike do you know what that may have been
It's not without having the bike in person
Great install Bill. I love the tip about pinching the clips with a rubber band to reinstall the seat. I need to get a comfort seat soon. I am waiting to see if a better aftermarket one comes out that is less expensive but the original comfort seat is really good. I may bite the bullet and buy one.
I would expect a $300 passenger seat to hold up better than that....
Hi, ist this the black Driverseat with the BRP #219400795? The colour Looks Like gray.
It's gray and it's the standard BRP high-end or comfort seat one it's almost like a dark charcoal color I guess you'd call it charcoal gray..
Great vid
Bill, after about a year, how has the comfort seat for you the driver and the passenger held up? Has it met your expectations or have they disappointed you with the comfort level?
The comfort seat is a huge upgrade from the stock factory seats that come on the 900 or the 600 model I would say the comfort seat is even better than the stock factory seat that comes on the rally model as well...
Well worth the investment my butt seems to like it..
@@BLRTUNING Great! I have been thinking of getting both of them but I haven't seen any reviews on those seats. Thanks a lot
@@BLRTUNING how much higher do you sit verses the stock seat?
How do you reinstall the OEM seat without taking apart the Ryker at all???? How would you get the rubber band or paper clips off?
From my understanding and from what I've experienced the only way to properly do it is to open up the clamshell body it's kind of a pain in the rear I wouldn't try it any other way though as I've seen a lot of them get torn and destroyed trying to not do it that way..
How do you remove the comfort seat? Do you have to open the clamshell?
Yes you will have to open the clamshell body to release the clips from underneath.. I have a UA-cam video showing how to open the clamshell body..
ua-cam.com/video/Mktcr29nDZQ/v-deo.html
if you like the content on my UA-cam channel please consider subscribing..
What’s the top speed on it ?
I have the regular seat and backrest. I don't need all the extra pegs and etc. Why can't I take my back rest off my original and attach it?
Not sure exactly what you're talking about this bike does not come with a backrest from the factory so I don't know what you mean by original
Can't find the link to lift the hard seat to put the padding back on
there you'd be able to put the seat back on
ua-cam.com/video/Mktcr29nDZQ/v-deo.html
Bill will this seat work with the Touring Edition Padded 2-Up Adjustable Driver Backrest?
I'm not sure to be honest with you
Do you have the video of installing the passenger? I cant get mine to lock
I don't believe I did a video showing the rear passenger seat but if you do a quick Google search on UA-cam there is quite a few videos
I tried to look for one but i only see the stock install i have the comfort passenger but for some reason it wont go all the back so i can lock it
@@jasty9335 the passenger comfort seat would install exactly the same as the stock factory rear seat. I have the comfort seat as well and as long as you push down firmly and then shove it backwards sometimes you have to actually slam it backwards then it will latch correctly
I had a question, can u have a max mount and saddle bag on at the same time? I can’t find any info if a ryker can have both
Yes absolutely
@@BLRTUNING great, thank you so much!
@@brittanywood6275 no problem have a great day and don't forget you can always take a look at our website we have lots of products available for the Ryker.... www.blrtuning.co
The bottom of my comfort seat has plastic clips. You said yours are metal?
The stock seat that comes on the rally and the 600 and 900 are plastic clips or basically like a foam material that is easily to move around and get them off the ones that come on the comfort seat are metal
Not sure why mine are plastic. I installed it today and one of the clips broke off.
Is there a way you found to lock driver seat to bot get taken off?
No we have not done that yet
Are you familiar with the "Solo Comfort Seat" ?
No I have never seen one in person or have I sat on one or anything so I am not very familiar with it I know what it is but I am not familiar with it
Whats the link for the seat?!?!
It's in the description of this UA-cam video
Sorry about that I guess the link is not in the description below the video. I will update that so it's back in there I think it's because they removed it for a little while. But here is the link on Amazon to the same product I'm showing in the video for the drivers comfort seat...
www.amazon.com/Ryker-Black-Driver-Comfort-219400795/dp/B07L9FF3Q2/ref=mp_s_a_1_18?crid=1XGDF2YTXJPQZ&keywords=Can-Am+ryker+driver%27s+high-end+seat&qid=1655559029&sprefix=can-am+ryker+driver%27s+high-end+seat%2Caps%2C150&sr=8-18
I have these seats there ok but still not to comfortable after two hrs riding
Where Can i Bus the decal
Which decal do you need
How do you remove the comfort seat?
You have to open the clamshell body.. then you have to release the tabs from underneath if you try to pull it up any other way it will most likely rip.. I have a UA-cam video that will show you how to open the clamshell body....
ua-cam.com/video/Mktcr29nDZQ/v-deo.html
@@BLRTUNING thank you. Your videos are always helpful.
Cool. But it's certainly not a "little" over $700.00. It's more like around $800.00. :)
For both I paid $758
Seems like it might be easy for someone to remove this seat while you're enjoying a burger or meal.
If someone wants something bad enough they'll take it no matter how hard it is to remove or easy
@@BLRTUNING true and sad..
You want to sale your old seats
Probably...
You can message me here.
on Facebook,
Bill Ramseyer Jr
facebook.com/BIGGDADDY007BR
trop long pour rien mais sinon utile
Video drug on too long in the intro. I stopped watching after 2 minutes
Great....
do the comfort seats work with driver backrest ? im looking to buy seats soon
It all depends on the backrest. I don't know because I haven't used one of the driver's backrest so you'll have to do some further research. I know some backrest will work with the seat and some will not