Cool vid man. Just a tip for the pedal flex. It seems to be a more forward/backward flex. Why don't you cut a custom block of wood to fit the underside gap of the pedal plate to where it meets the ground. You can then bolt that from top, through the pedal plate holes, and into the wood. That way when you push you'll have the block of wood preventing the flex towards the ground. Just a thought figured I'd share. Enjoy!
I got a fanatec csl 8nm kit but i didnt get the load cell kit, think these would be a good upgrade? i notice some sites have afterpay so.. trying to keep it around the 500$ mark as i need to still get a chassis etc..was gunna home make for now till i can upgrade gear but good pedals are a must i think
They have some pretty bad elastomers to start with but if you are willing to spend some time and effort modding the pedals and getting it dialed in these definitely have higher potential. I have improved with the short time I have spent with them. Stay tuned for the full review later!
If you tilt back the seat, then now you'll have the problem of pushing on the brake pedal, lifts you up the seat. Which is then sort of just like trading one flex for another flex.
@@apexvisiontv the simlab P1X Pro is the one I want. Been comparing across NLR, TR and Simlab for the last few weeks and it just seems like the absolute no brainer choice. It's not just competitive on price for what you get but literally the best performing rig and best looking too imo.
Yeah I’ll be buying a new chassis soon. I know it’s the biggest factor. I couldn’t resist swapping my CSL Elite V2 out for these considering how little out of pocket difference it came out to
It’s an older Trak Racer RS6 that has the two bolting points really close together. Compared to the newer versions that share the same pedal plate as the TR8 Pro. I tried to cut into the flex by laying them flat but it really really threw off my driving. I won’t do a full review until I get a chassis that can handle it
Cool vid man. Just a tip for the pedal flex. It seems to be a more forward/backward flex. Why don't you cut a custom block of wood to fit the underside gap of the pedal plate to where it meets the ground. You can then bolt that from top, through the pedal plate holes, and into the wood. That way when you push you'll have the block of wood preventing the flex towards the ground. Just a thought figured I'd share. Enjoy!
I’m really close to making some moves to upgrade the chassis so stay tuned!
Glad you like the new pedals man they look dope!
They damn sure look the part
Cant wait to test these out! They look like price to performance is def worth it!
Yeah it’s gonna take some ironing out but I already have them running better. Gonna slowly work in all the combinations and go from there
The full wheel deck moving when u braking mate
Yeah it’s chassis Time. I did put something under there kind of up against it
🔥🔥🔥
Appreciate you
I got a fanatec csl 8nm kit but i didnt get the load cell kit, think these would be a good upgrade? i notice some sites have afterpay so.. trying to keep it around the 500$ mark as i need to still get a chassis etc..was gunna home make for now till i can upgrade gear but good pedals are a must i think
They have some pretty bad elastomers to start with but if you are willing to spend some time and effort modding the pedals and getting it dialed in these definitely have higher potential. I have improved with the short time I have spent with them. Stay tuned for the full review later!
Good pedals are the most important equipment. Besides a stable platform to drive on
@@apexvisiontv It'll work fine with fanatec? assuming its plug in play with most brands as long as on pc?
@@jacobbordin8718 if you are on PC you will be fine
@@jacobbordin8718 it plugs directly into the pc then you have control box
If you tilt back the seat, then now you'll have the problem of pushing on the brake pedal, lifts you up the seat. Which is then sort of just like trading one flex for another flex.
I need a chassis so bad. Hoping to get a TR160S or a simlab next month!
@@apexvisiontv the simlab P1X Pro is the one I want. Been comparing across NLR, TR and Simlab for the last few weeks and it just seems like the absolute no brainer choice. It's not just competitive on price for what you get but literally the best performing rig and best looking too imo.
@DrR1pper that’s why I love the 160S so much that blue is nice!
@DrR1pper P1X is a potential last rig type of strong so I get that!
@@apexvisiontv my thoughts precisely too.
for one thing look how much you base flexes.
Dude you gotta mount them a lot better than that.
Yeah I’ll be buying a new chassis soon. I know it’s the biggest factor. I couldn’t resist swapping my CSL Elite V2 out for these considering how little out of pocket difference it came out to
It’s an older Trak Racer RS6 that has the two bolting points really close together. Compared to the newer versions that share the same pedal plate as the TR8 Pro. I tried to cut into the flex by laying them flat but it really really threw off my driving. I won’t do a full review until I get a chassis that can handle it