I just got the Ketuo Triad based off your video and while i like it I'm surprised you didn't talk about its biggest con imo. The blade is too short for no reason. It could easily be 1/4" longer but they chose to wrap the backspacer all the way around eating up blade room. With another 1/4" the ratio would be perfect but now it look a little small for the handle.
See. Told ya 2 years ago. Early detents are better then detent ramps. No doubt. Cause if you put a ramp on an early detent it basically makes it later if you know what i mean. By the time you get off the ramp its not early anymore
Bestech won't do magnacut more than 62 even if they say higher hardnesses. Same for m390 or 20cv... 60 max even if advertised higher. Pretty sure they dont use cryo also. Rike ranges 57 to 60 also so good seeing 61 on those ketuo models. 20cv from koncept is basically just as bad as kizers. Prices should be lower at those hardnesses for these manufacturer's.
This is my first video of yours and you really seem to have a love for blades. I'm wanting to upgrade my everyday knife for 2024 and I currently carry a Kershaw Leek and I LOVE it..... but the blade dulls quick and I would love to have a button lock. I was wondering if I could maybe get a recommendation from you for one that is flat and thin like the Leek but has a button lock and a better edge for work. I cut rubber hoses, mud flaps, poly plastic type materials etc. I know some of those probably shouldn't be handled with a pocket knife but hey, it's there in my back pocket. My budget would allow for no more than $150 reasonably unless it's just a work of art.
@@acbigal thank you 🙏 Button lock brings to mind Protech immediately but those are pricey. I got the Vosteed Racoon button lock when it came out and still think it’s a nice solid slicer. I think Vosteed has ironed out their button lock failure issues. It is affordable and 14c28n. And then you have the CJRB Pyrite series of button locks that people really seem to like. I don’t have experience with them though. Hopefully others will pipe up with good recommendations. It’s always nice to go over and see what is being offered on the secondary market at r/Knife_swap. Good people over there and you could get a deal on a premium knife that is still in budget. All the best to you
The giant ass lanyard cutout just ruins the lines of that first knife, because it’s absolutely gorgeous otherwise. But I guess that’s not all bad news, it saves me some money.. 😁
I have to agree. All bangers. That Ketuo seems to have a lighter spring looking at the bounce back. Digging that lil Bade Modern Design. That Kansept looks bada$$. But that H.A.L.T. My God 🔥🔥🔥A 50/50 choil in my opinion would take it over the moon but As is its still one the dopest knives ive seen lately. Awesome awesome job Louis. Congrats on finally getting it out there. Wish u nothing but success brother. And as always Jerad thanks for all your amazing content. 🙌🏻💪🏻✊🏻💯
Hey buddy.... I just recently started watching your videos and have to say I've been enjoying them enough to go through and watch even some older ones. I feel your pretty experienced in the sharpening world and would love your opinion. I just started sharpening and have only used green and black compound wax but want to try a gunny juice diamond emulsion what micron would you recommend for my single strop and do you recommend smooth flesh side or rough side of leather? Thanks buddy!
i love the titan, i hate the machining lines on the blade tho, it feels unfinished to me. give me sand blasted or stone washed or mirror polish, literally anything...
Like 90% of knives aren't really sharp from the factory. It would be nice if they were, but IMO it's not really a negative for that knife in particular.
Addicted to Knives is one of the dumbest names ever. Not only does it sound like a middle schooler came up with it, but when you google it the results are just flooded with addiction links
DONT FORGET THAT THE ATK HALT IS A PROTOTYPE AND IS GOING TO HAVE SMALL CHANGES IN THE FINAL STAGE THANK YOU FOR WATCHING
Where can you even buy it? I can't find anything about that knife
Is there a Canadian distributor for the ketuo Triad???
I'm such a sucker for harpoons and dual grinds too
I just got my Ketuo Triad in the mail last week. I love it!🔪🖤🗡
I just got the Ketuo Triad based off your video and while i like it I'm surprised you didn't talk about its biggest con imo. The blade is too short for no reason. It could easily be 1/4" longer but they chose to wrap the backspacer all the way around eating up blade room. With another 1/4" the ratio would be perfect but now it look a little small for the handle.
Wow, that Kansept Cosmos is so wickedly beautiful. 😁
Thank you!
Thanks for checking out the Cosmos! I love that nebula carbon, happy to hear it’s ergonomically a winner for you too!😊
The triad is a beautiful knife and thank you for showing it. I open mine in 2 days !!! The only thing I would change is the back spacer.
Thanks for bringing us a great 2023...Merry Christmas...and we are all hyped for this channel in 2024...👊
THANK YOU SO MUCH HAPPY HOLIDAYS
The poon dual ground Tanto is my favorite blde shape now. So beautiful. The ATK is nice.
Honestly, the cheapest cosmo is my favorite. It looks great with the black stonewash and brown micarta. Really cool shaping for blade and scales.
Thank you for the feedback! That version has really
Become a favorite of mine as well - the black and burlap look pretty cool :)
@PaulMunkoTV yeah. I thought it was more complimenting to the style. Not over the top.
See. Told ya 2 years ago. Early detents are better then detent ramps. No doubt. Cause if you put a ramp on an early detent it basically makes it later if you know what i mean. By the time you get off the ramp its not early anymore
A late detent has become one of my biggest pet peeves. Thanks Jerad 😅😂
Really hope that Bestech runs the MC on the Halt 63-64. MC is underwhelming at 61-62. I’d rather have s90v if that’s the case.
Bestech won't do magnacut more than 62 even if they say higher hardnesses. Same for m390 or 20cv... 60 max even if advertised higher. Pretty sure they dont use cryo also.
Rike ranges 57 to 60 also so good seeing 61 on those ketuo models.
20cv from koncept is basically just as bad as kizers.
Prices should be lower at those hardnesses for these manufacturer's.
Thank you Mr. Neeves! Im learning alot
I love your way to present the knives abd i would love if you could mention the prices.
Cool knife. Must.... resist...
This is my first video of yours and you really seem to have a love for blades. I'm wanting to upgrade my everyday knife for 2024 and I currently carry a Kershaw Leek and I LOVE it..... but the blade dulls quick and I would love to have a button lock. I was wondering if I could maybe get a recommendation from you for one that is flat and thin like the Leek but has a button lock and a better edge for work. I cut rubber hoses, mud flaps, poly plastic type materials etc. I know some of those probably shouldn't be handled with a pocket knife but hey, it's there in my back pocket. My budget would allow for no more than $150 reasonably unless it's just a work of art.
That is one very nicely presented question. I hope he gives you a recommendation but your price range might help nail down the best option.
@@giantfatberg Well you ain't wrong sir!
@@acbigal thank you 🙏 Button lock brings to mind Protech immediately but those are pricey. I got the Vosteed Racoon button lock when it came out and still think it’s a nice solid slicer. I think Vosteed has ironed out their button lock failure issues. It is affordable and 14c28n. And then you have the CJRB Pyrite series of button locks that people really seem to like. I don’t have experience with them though. Hopefully others will pipe up with good recommendations. It’s always nice to go over and see what is being offered on the secondary market at r/Knife_swap. Good people over there and you could get a deal on a premium knife that is still in budget. All the best to you
Nice sound from the first knife 💯
Love that first knife. Thanks Jared
Last two look like what some specific TwoSuns should have been, heck even the bade knife too. Neato
The giant ass lanyard cutout just ruins the lines of that first knife, because it’s absolutely gorgeous otherwise. But I guess that’s not all bad news, it saves me some money.. 😁
The carbon fiber on that triad is sick. And those 2nd two are pretty nice too.
I have to agree. All bangers. That Ketuo seems to have a lighter spring looking at the bounce back. Digging that lil Bade Modern Design. That Kansept looks bada$$. But that H.A.L.T. My God 🔥🔥🔥A 50/50 choil in my opinion would take it over the moon but As is its still one the dopest knives ive seen lately. Awesome awesome job Louis. Congrats on finally getting it out there. Wish u nothing but success brother. And as always Jerad thanks for all your amazing content. 🙌🏻💪🏻✊🏻💯
The halt looks like it’s got way too thick of a blade stock. Also wish it had a 50-50 choir, like u said
Really like the halt he makes that more lefty friendly I’ll get one
1st knife would be a killer one with titanium or steel handles. 🤘🏻 🔪 Lovely blade shape.
I dig the purple one
Ketuo rocks
This man is addicted to flipping the knives that he present, we didn't need to see them just for a moment! Haha.
Hey buddy.... I just recently started watching your videos and have to say I've been enjoying them enough to go through and watch even some older ones. I feel your pretty experienced in the sharpening world and would love your opinion. I just started sharpening and have only used green and black compound wax but want to try a gunny juice diamond emulsion what micron would you recommend for my single strop and do you recommend smooth flesh side or rough side of leather? Thanks buddy!
i love the titan, i hate the machining lines on the blade tho, it feels unfinished to me. give me sand blasted or stone washed or mirror polish, literally anything...
That titan is cool
That ketuo is wicked
Thanks bro 🙏
whats the angle of the herman ishtar sharpened st?
That first one is especially sick! But Jared, come on bro: a knife that won't cut is NOT a banger! (2nd knife)
Like 90% of knives aren't really sharp from the factory. It would be nice if they were, but IMO it's not really a negative for that knife in particular.
Please stop flipping! Let me see the blade!
He can't help it man.
You know your only here for the handle
Look at pictures if you want a still shot of the blade. Videos are for the action!
Hit pause ya weirdo!!
Maybe don’t drink so much coffee. Slow it down a lil bit.
Addicted to Knives is one of the dumbest names ever. Not only does it sound like a middle schooler came up with it, but when you google it the results are just flooded with addiction links
That white mountain knife is a piece of garbage. I don’t want glue holding my pocket clip.
Dude you're my favorite knife guy but the constant "filcking" is annoying as shit.
Ketuo the same as rike or does rike just do the manufacturing?
Does anyone have a link to ATK. Whenever I googled it all I got was a suicide prevention number.
Poon tanto in cf , man I need this , just purchased two sun ts298 with ano ti