Slope Calculation

In this video it is explained how to calculate the slope between two points having different elevation. First of all difference of the height is calculated then divided by horizontal difference since we take slope in percentage the answer is multiplied by 100.
Formula "height difference divided by horizontal difference multiply by 100.

[@numifps]

lmao explained more in 2 mins then my teacher in an hour lesson. thanks.

[@educationforall1442]

Thank you so much for your great compliment. 🙏👍

[@majorturk4307]

Perfect and straight to the point, salute 💯💯💯

[@educationforall1442]

Thank you sir.

[@muhammadabubakarsiddique2765]

good and simple explanation

[@nemboihaokip9575]

Sir, can i use this method to calculate side slopes for Manning's Formula

[@educationforall1442]

Thanks for your question.i guess not but I have to check to confirm it with you.

[@Хајдук1]

This is so helpful thank you very much 😊

[@educationforall1442]

Thanks for your compliment sir, 🙏

[@Hester_prynne]

I was following until the final step. Could you explain how you get 20%?

[@Exorbulla]

why do teachers need like 2 hours to explain something that this guy explained in 2 sentences

[@educationforall1442]

thanks for your compliment, 🙏👍

[@AsadAli-rr4oy]

Can you explian this 2 value 540 elevation and 520 where you got this value.
I have 2meter hight and 8meter length how i calculate slop?

[@educationforall1442]

Thanks for your question. These numbers are just numbers you can use your numbers. I used them just to explain. Thanks 🙏🏽

[@shuttyskenzin9237]

Cant we use Pythagoras?

[@mubeensakharkar4369]

Hi sir cover level. 5.403 and invert level 4.303 and manhole depth 1.100 and length 28 meters how much % slop ???

[@educationforall1442]

Thanks for your question please use the formula given in video. High elevation is 5.403 low elevation is 4.303 height is 1.100 and length is 28 then multiply with 100 you will get the slope. Please use formula

[@DavidSolve]

Please help me for my assignment:
An inclined plane rises to a hight of 2 meter over a distance of 6m calculate
Angle of the slope

[@educationforall1442]

Send me your assignment and I will look into it. Of course I can't promise 🙏

[@nazaibkhan5703]

nice one

[@apatel0011]

How did you get the elevation number? I am building a new home, and I want to know the elevation for the slop as well?

[@educationforall1442]

Thanks for your message. These numbers are assumed number in your case you might need a topography data from your local geological data centre.

[@xdeimon2629]

What if i start from the lowest point? And then go up and run? Why is my answer positive rise and negative run?

[@educationforall1442]

Sir please write your whole question and data on paper for your perticular question and send it to me then I will try to answer

[@muhammadaminkhan2249]

Do you know slope/( b )value in fish weight length relationship

[@educationforall1442]

I am not sure what do you mean?

[@lzappa9109]

I like!

[@nirbhaysaini9578]

hi, how to find height in case when the floor is uneven, and run is little ( like run = 10 ft.)? , Kindly answer,
Thanks

[@educationforall1442]

Thank you for your message. I don't understand what do you mean by uneven floor? Secondly this example demonstrates a standard way of finding a slope while road construction.
I will try to answer your question if you once clarify. Thank you

[@narohit]

Hi, I have question, answer it, thanks for hearted comment,

[@narohit]

@@educationforall1442 hi,
For example I want to put 10 feet PVC pipe of water on slope of 2 inches on stair case, kindly answer ,
Thanks

[@educationforall1442]

Thanks for your question. What I understand is that you didn't give enough information in the question, for example in order to calculate the slope you need to have an area which has a some kind of height difference between two points, for example in your case you have a length 10 feet but I can't see your starting point and end point heights.

[@narohit]

@@educationforall1442 hi,
In my example , height is 4 ft of both I.e. starting and ending point, as I told floor is uneven ,

[@jakesmitherbob8216]

How do you find the number to the top line of the triangle

[@antonios4926]

Its probably the height from the ground to the entry point of say a car park.

[@educationforall1442]

Thanks for your message, these numbers are just to give an example

[@manjupundir7583]

Why u put 100 in multiply while formula rise upon run

[@educationforall1442]

Thanks for your question. We calculated slope in persentage so that's why 100 use for percentage. Thanks hope I answer the question

[@SamsungSamsung-fn9ek]

Hillo sir if first point is 620.20 distance 20 m and slope ratio 1.5 find out elevation of last point must reply many people cunfuse in this q

[@educationforall1442]

Thanks for your message, Sir I guess you can find the answer by rearanging the equation or you are lacking with enough info

[@SamsungSamsung-fn9ek]

Hello

[@user-pt9wq4xm4q]

SIR HOW TO CREATE 1:9 SLOPE HEIGHT IS 300 WIDTH IS 2619

[@educationforall1442]

Please follow the video. You can measure the distance

[@JustForfun-rk8qr]

Good

[@jennieleegems]

Thank you 🙏🏻

[@educationforall1442]

Thanks for watching 🙏🏽

[@traininginengineering6398]

Appreciated

[@educationforall1442]

🙏👍

[@helenuzzzz1982]

perfect teacher

[@educationforall1442]

Thanks for your compliment. 👍😘

[@nickay2549]

How would u then change that to a ratio?

[@educationforall1442]

Thanks for your comment, I didn’t understand what you mean sir 🤔

[@WilliamShockley-hy6vc]

how did you do it can you share with me , thank you

[@educationforall1442]

Thanks for your comment, what can I share with you more please explain a bit. Thanks

[@5hyguy42]

The accent is so good!

[@educationforall1442]

Thank you so much for your compliment.🙏

[@AsifkhanNaser]

underground mine and surface measurement formula ??? plz

[@educationforall1442]

Thank you for your message. Dear I don't really understand what do you want? Please elaborate a bit more. I will try my best. Thanks 👍

[@AsifkhanNaser]

@@educationforall1442 sir want to measure coal mine surface area...Formula ?

[@AsifkhanNaser]

@@educationforall1442 coal mine surface area measurement formula ?

[@abdurrahim3605]

Thanks a lot

[@educationforall1442]

Thanks you Sir 👍

[@mohammedabdulateef9615]

How did you arrived at Height difference.

[@educationforall1442]

It's an assumption

[@sreenathijk2952]

but how to find the horizontal distance?

[@educationforall1442]

Please measure the distance

[@maverick_technology5285]

Voice is very low ....😕

[@educationforall1442]

Sorry, I will try to improve my voice.🙏

[@razvigkworld1507]

The sound quality is very poor.

[@educationforall1442]

I work on it sir, thanks 🙏🏽

[@zaldyballaret305]

Low volume sound

[@educationforall1442]

Sorry I will improve it next time for sure

[@hmara.pakistan]

Horizantal distance

[@educationforall1442]

You can measure it in your case

[@hmashuda7008]

are you writing correct spelling of height ?

[@educationforall1442]

Thank you for your message I will try to write correct spellings next time.

[@xdeimon2629]

Hight?

[@janidkoch7]

Audio

[@educationforall1442]

I am trying to fix this issue

[@jijeshrajan3293]

Wrong

[@educationforall1442]

Thanks for your message please indicate the mistakes so I can correct.

[@harinathkudkyal]

wrong method...

[@educationforall1442]

Ok sir I will do with correct method soon if you have any recommendations plz share thank you

[@jamesbrown5107]

Good