Congratulations on the very useful tutorial. I ask you for advice: with a ZED-F9p in rover configuration, detecting more points I get a very quick fix but I see the points detected on the Google map of SW Maps, about one meter away from the real position. What am I doing wrong? A greeting Aldo Guarasci
At this point in time by using the Android application (watch from 18:00 onward) - the Android application receives the correction data from RTK2go using the phone's cellular connection and pushes this to the rover using the Bluetooth module. This does limit you to be within a few meters of the rover for the Bluetooth connection to be retained, but it works well enough for out applications. To increase the range you could always use a 433/868MHz radio transmitter, i.e. direct communication between the NTRIP caster and the rover, I've seen one or two examples on such an implementation.
Congratulations on the very useful tutorial. I ask you for advice: with a ZED-F9p in rover configuration, detecting more points I get a very quick fix but I see the points detected on the Google map of SW Maps, about one meter away from the real position. What am I doing wrong? A greeting Aldo Guarasci
Good Job this is cost efective set up for rtk
Does the RTK unit on the Mavic 3 Enterprise make a difference with out a base station?
Do uou have to have a base to use this ?
It's showing in mobile ok, but how u sending correction data to rover gps module
At this point in time by using the Android application (watch from 18:00 onward) - the Android application receives the correction data from RTK2go using the phone's cellular connection and pushes this to the rover using the Bluetooth module. This does limit you to be within a few meters of the rover for the Bluetooth connection to be retained, but it works well enough for out applications. To increase the range you could always use a 433/868MHz radio transmitter, i.e. direct communication between the NTRIP caster and the rover, I've seen one or two examples on such an implementation.
What base dish do u use or whats a good one to use cheers
All the hardware details are available from the article (open access): www.hardware-x.com/article/S2468-0672(21)00032-8/fulltext
How much accuracy
Around 15 mm, kindly refer to the article for the comprehensive specifications and evaluation of the accuracy: doi.org/10.1016/j.ohx.2021.e00203
Thank you for the videos in the series. Can I get your email for further enquiries?
Hi Champ. Sure thing, easiest would be to connect on LinkedIn: www.linkedin.com/in/broekmanandre/
Thank you bro
My pleasure!
GL bro