Audi D4 and C7 Driveshaft Carrier Install - JXB Performance
Вставка
- Опубліковано 7 вер 2024
- This is on a D4 S8. C7 install is very similar. One less tunnel brace. Must remove the two splash shields on either side of tunnel to get at outer tunnel brace bolts. You can also save time by splitting the exhaust in the middle instead of dropping it from the back, depending on what exhaust you have installed.
www.jxbperform...
Torque specs:
Bolts that hold the 2 halves together: 25 Nm
Bolts that hold the carrier to the vehicle: 19 Nm
Blue or red thread locker recommended on all bolts.