Tips and Tricks for making Turkey Diaphragm Mouth Calls

Here’s a few tricks I’ve learned throughout the years while making these calls. There’s many ways to do this but this is what works for me. I hope there is something you can use in this video if you make calls. If you just like watching some of the ways I do this then thanks for watching. Also if you want to order some calls feel free to reach out to me on Facebook just search Gobbler Sniper.

[@rob701TurkeyGuy]

Glad to see something diaphragm call related on UA-cam. I want to learn to make my own versus buying them every year. My saliva I eat through calls and I always have one in my mouth. I have looked all over and found nothing on making calls

[@joecoffman284]

I don't care what anybody says, I like how you explained it and how you done it so I'm going to do it just like you done it and that way everything orta be did right. Don't you think? I really enjoyed your video. Thanks man. Turkey season is right around the corner here in north Alabama. "Gobble Gobble ghee and a Gobble Gobble good. Safe and happy turkey huntin' to you."

[@gobblersniper]

Thank you so much. If you need anything reach out to me

[@geraldkoch394]

Man that’s nice

[@gobblersniper]

Thanks

[@danblatt3187]

Good Video

[@gobblersniper]

Thank you

[@joshsmallwood1]

Great video! Just ordered a press and cutter. Where would you recommend learning how to cut the latex? I know a little about cuts and what each cuts are called, but I’m looking for where you may have learned tips on cutting it?

[@gobblersniper]

It’s honestly trial and error

[@gobblersniper]

Start with v cuts then go from there

[@TRKYHTR1]

Not all mouth calls are made the same. Good job.

[@gobblersniper]

Thanks

[@appalachianathlete491]

Awesome video! I’m an ole boy from West Virginia looking to get into making calls for my family and I. I’ve looked on UA-cam and have read a few articles about how to get started in making some mouth calls, however I can’t find anything on where to buy the supplies needed (latex, tape, etc). Any chance you could point me in the right direction? I’d also like to find a press similar to yours so that I can make the most professional call I can.

[@gobblersniper]

Feather ridge has the press . Pioneer turkey call supplies for supplies

[@mikealrichards508]

My advice is to get the Feather Ridge Press from Thad Bright they are the gold standard. Pioneer game call supplies and Michell Johnston of Dead End Game Calls for latex, Tape & Proph.

[@23KCOutdoors]

How do you get the tape with your stamp on them

[@gobblersniper]

Stamp it with waterproof non toxic ink

[@lukeg5184]

Where do you get the stamp to put a custom logo on the tape?

[@gobblersniper]

Someone local made it for me.

[@lucasbarber4285]

I’ve been making calls for a bit now but cannot find a cutter anywhere and really need that consistency before adding them to my small business, what brand cutter do you use and where could I find one?

[@gobblersniper]

Look up Thad Bright on Facebook feather ridge custom calls

[@lucasbarber4285]

@@gobblersniper thanks man!

[@travisgodwin7775]

What thicknesses of latex sheets do you use??

[@gobblersniper]

.004 and .003

[@23KCOutdoors]

What’s your tension for bat wings

[@gobblersniper]

I make several different ones

[@jonpatterson5668]

Hey man , I see you're in Kentucky, what part

[@gobblersniper]

lily ky

[@476fireman]

Is there a way to make a mouth call without latex for someone who is allergic?

[@gobblersniper]

Im not sure.

[@huntinclass5042]

Do you laser engrave your logo on your mouth calls?

[@gobblersniper]

No I use a stamp

[@vickiemorriston4378]

Where do you get your stuff from

[@gobblersniper]

Pioneer and dead end

[@nickroy1785]

Where did you get the presses from?

[@gobblersniper]

Feather ridge

[@gobblersniper]

Or Thad Bright

[@nickroy1785]

@@gobblersniper Thanks. Do I have to message him on Facebook because I am having some trouble finding it online?

[@gobblersniper]

Look for Thad Bright with Featherridge on Facebook

[@nickroy1785]

@@gobblersniper Ok thanks

[@connorduncan5145]

How do you get your logo on your tape?

[@gobblersniper]

I use a stamp and an ink pad I think the ink brand is archer or something I would have to check. I had someone that does laser engraving do the stamp for me. I also stamp the tape before I frame the calls. Stamping tape is first thing I do.

[@mikealrichards508]

Connor I build a jig and stamp set if you are interested I can send you some information on it. It centers the stamp to the tape and makes it consistent marking every time. Look me up on Facebook and send me a PM

[@GarrettHarperofficial]

Hey Mikeal could I get your Facebook please so I could pm on getting a custom stamp and stamp jig. If so that would be great

[@mikealrichards508]

@@GarrettHarperofficial Facebook is just under my name Mikeal Richards send me a message when you send the friends request. I dont accept requests without a message. Thanks,

[@gobblersniper]

Do you have a video uploaded of how the stamp works just wondering

[@user-oy9lx5cv2k]

How much would it cost to start to make my own call

[@gobblersniper]

It’s just according to what you want to put into it. There’s jigs and presses you just need to reach out to Thad Bright. Its more of a learning process than anything

[@user-oy9lx5cv2k]

@@gobblersniper ok but where do I but my jig and press

[@gobblersniper]

@@user-oy9lx5cv2k Thad Bright on Facebook

[@user-oy9lx5cv2k]

@@gobblersniper thanks man

[@_weondat_9061]

how do i buy one

[@gobblersniper]

But one what? Sorry. If it’s calls message me on Facebook if it’s a press it’s Thad Bright with Feather Ridge

[@gobblersniper]

Buy not but sorry