Mercedes Benz E250 CGI W212 M271 Cold Start Stall Rough Idle | Ignition Coil P2301 P2304 P2307 P2310
Вставка
- Опубліковано 1 жов 2024
- An attempted weekend fix on the E250 with a cold start stall problem towed back from 3rd party workshop with all four ignition coils replaced without solving the cold start stall problem. On every first cold start attempt, the car will crank and stall instantly with 4 pending DTC ignition coil primary control circuit high P2301 P2304 P2307 P2310, even with WOT on the accelerator. After retrying with multiple starts, the car will cease to stall but idle roughly. After the coolant temp increases, the car no longer stall, idle roughly and able to drive as normal. However, the car will stall on cold start after leaving overnight. The cycle repeats.
Recorded on: August 2020
Subscribe for more TorqREV videos: bit.ly/3bVoYuh
Hit the 🔔
---- Follow Us ----
On Facebook: / torqrev
On Instagram: / torqrev
#W212 #M271 #STALL
งง
Hi, me from Klang. Where did you repair the ECU unit? and how much it costs? I might be having the same problem. Thanks.
Hi, I have exactly the same problem right now. Exactly!!!. 2013 C250. 75k miles.
My car has the same problem, when it's cold, after it warms up it's normal, it creates an error in the central p2310 p2307
Check for the capacitors inside the ECU. It's a common problem for the Continental ECU.
Hi, I'm Mike and I have the same car - E250 CGI - year 2010. How many kilometers have you travelled in this car ?
This car has 60,000km mileage.
I am having the same problem. :(. From Sg
Managed to solve ?
@@Samuelmelo83 I took out all the coils and found one of them a bit corroded. Cleaned with wd40 seems to solve the problem. However recently had engine stalling intermittenly while idling at traffic lights. Did a scan and shows ecu problem. Sent ecu for repairs, so far so good. Hope it helps.
Hi there in your case what solution to overcome this problem?