Hi guys, sorry for our late reply. If you are interested in jewelry manufacturing, you can follow us on Facebook, where we share manufacturing tips. facebook.com/PrimaroseJewelry/. Any customer who is interested in hiring us to manufacture your silver jewelry, please contact sales@primarose.com. or visit our website www.primarose.com
@@mohammednadirkk8514 Hi Kallu, sorry for the late reply. Now we don't offer any training because we are a manufacturing company, but you can discuss any questions for free thank you:)
I do this in my workshop with a spin casting setup. I debubble using my vibrating fretsaw table and a stick. I can cast maybe 150 pieces at one time, but this is how the professionals do it, Amazing!!
@@TheLordcruiser Sometimes you have to make a value judgement. If I was casting a few times a week I'd consider the expense, but as I cast maybe 2 or 3 times a month and I have a system that works, it's not good value..
@@IAM_THESOURCE I'm sure a vacuum debubbling set up works better but is it worth the expense? Casting is an expensive business and you have to justify the expense of some of these machines..
@@mohammednadirkk8514 hi sir, thank you for contacting us. during the pandemic, we don't have the policy to train people. anyway, I will keep your contact, and if the broad has the policy to accept foreign employees, we will not hesitate to contact you.
sorry for the late reply. I have been off for a while now I'm back. There are many kinds of acids that can clean. but if my memory serves me right it is Nitric please.
Hello Primarose, Your process is really fascinating. Can you please suggest to me what covering sheet you're using to cover the casting flask for no leakage?
Hi Atum, thanks for your comment. Now we don't have a tutorial offer because we are a manufacturing company, but you can ask questions for free if you have :)
If yes, please buy the raw wax from the supplier, put it in the injection machine, and then let the machine eject the wax into a rubber mold, please see @0.55
Hi Farukh, you probably mean a steel pot coated with a silver layer? unfortunately, we have not ever used any coated pot. but do not use Brasso to clean because it will make the coating peel away.
Machine made is just a beautiful because machines had to be made by hand at some point to begin with. It's the design or the artistry that is most important - It doesn't matter the tool used to convey that.
You didn't prep your casting 'plaster' well enough to remove all the possible bubbles. Some use a vacuum chamber to force out the bubbles before pouring, or vibrator, or combination of both.
sorry for the late reply. I have been off for a while. Yes please we are able to make custom nose rings with 14k gold plated on sterling silver. If you don't mind please give us your email or you can contact sales@primarose.com please.
Hi kai, the broken candles are considered low-quality candles, so we do not reuse them. If you reuse them, you will get lots of defected-products. We sell them instead.
@@MrWolfFenrir Hi Madams First of all, thank you very much for your comment. but let me try to fix some misunderstandings. 1. the products in Aliexpress come from China, they are not related to us at all. 2. I admit that we do not decorate the factory at all in order to "save cost" , as the factory is considered "back end", and we (at first) never plan to make any factory tour or show it to customers. Thus, we just focus merely on "function", not "appearance". 3. Per the safety and healthcare standard, there is just only some key specific areas to be concerned about, that are; -Labor employment(can not hire kids, and fair welfare) -Fire safety -dangerous Chemical management -Machine/boiler maintenance and control -Nursing room. To Summarize, safety and health standard does not relate to how beautiful it is.
Me parece muy rudimentario el "abrir", el molde con una cuchilla,porque mejor se impregna la mitad del molde con talco y se va abrir mas facil sin problema. Un molde d hule vulcanizado tiene propiedades increibles,despues drvulcanizado se ahoga en petroleo durante 24 horas,el mole se incha hasta un 500 por ciento,mas tarde con perafina obtenemos una copia bastante mas grande igualita. Espero les sirva. "jnp"
Hi, I was wondering if someone could help me out with a problem I’m having. I recently got into wax carving and had several pieces cast in silver. The problem is that every casted piece tarnishes extremely quickly, I’m talking literally a few hours of just lying on my desk after polishing and it already starts to tarnish. I really don’t know what to do about this… Am I doing something wrong or is something wrong with the alloy my caster is using? Or is that a normal thing with casted silver?
sorry for the late reply. I have been off for a while now I'm back. the big water bath that you see is just normal water please. we do that to cool down the hot tree. For the small bath is acid. we put the tree into it to clean.
@@Primarose Pls tell me how can we break easily flask after casting ,, we using kws machine after that we dip it sulfuric acid then water jeting so it consume more time ..pls tell
@@Primarose actually sir we are starting veccum casting process in silver so wax manufacturing kaha se karte hoo means supply karte hoo so I need contact of wax manufacturer for veccum casting machines
@@TheRajkotians ok understand. It seems that we are living in different countries so it is hard to recommend because I know just only suppliers in my country. However, the price should not exceed 0.7 USD /kg.
Hi bullourias, thanks for your recommendation. We change the masks now to be thicker ones. We sometimes tell our employees to open the machines pulling toxic fumes away.
HI Baiman, thank you for your question and sorry for my late reply. currently, we don't have vacancies for work please. If there are some vacancies available, we will disseminate the news further and may keep your contact.
Hi Parak, sorry for the late reply. waste from which step do you mean. I mean there are many steps of making jewelry and each step generates a different rate of the waste.
Thank you for your comment please. Actually, the jewelry's value is not trivial. Jewelry made of silver is considered semi-fine jewelry. The value of products depends on the materials and worker's skills, not the appearance of the factory. Thank you.
@@iqinsanity Hi Andrew I understand your point now. we always avoid casting something "big", long, and "smooth" surface because such work often easily evokes lots of problems, especially orange-surface defects (I don't know what this defect is called in English). When customers request products like smooth big jewelry, we need to cast them in small pieces and welding them after that, or switch to other production techniques. (in order to provide best quality of work without orange-surfaces)
Hi, sorry for the late reply, price depends on the shape and weight of each product. If you are interested, please send a picture, dimension, and weight to get estimated prices "Free".
Hi guys, sorry for our late reply. If you are interested in jewelry manufacturing, you can follow us on Facebook, where we share manufacturing tips. facebook.com/PrimaroseJewelry/. Any customer who is interested in hiring us to manufacture your silver jewelry, please contact sales@primarose.com. or visit our website www.primarose.com
Hi. Is training available there??
@@mohammednadirkk8514 Hi Kallu, sorry for the late reply. Now we don't offer any training because we are a manufacturing company, but you can discuss any questions for free thank you:)
Can I get job there
I did that exact work back in 1978 at van Kempen en Begeer in Voorschoten! Great to see it again.
I do this in my workshop with a spin casting setup. I debubble using my vibrating fretsaw table and a stick. I can cast maybe 150 pieces at one time, but this is how the professionals do it, Amazing!!
Which metal is used in this video ...and do you use the same Metal for casting
For debubbling I think using a vacuum chamber is more efficient... 🙏
@@TheLordcruiser Sometimes you have to make a value judgement. If I was casting a few times a week I'd consider the expense, but as I cast maybe 2 or 3 times a month and I have a system that works, it's not good value..
Thank you for the bubble removal tip! I was about to buy a vacuum until I read this
@@IAM_THESOURCE I'm sure a vacuum debubbling set up works better but is it worth the expense? Casting is an expensive business and you have to justify the expense of some of these machines..
I did this for 20 years with a company in the UK.
Brought back many memories
What are u doing now sir??
@@surenderkamala9413 Not working now as I was injured in an accident and now recovering from surgery
Hiiii can you tell me where I go for lern this
Hello assalamu alaikum
My Shop jewellery wholesaler. In Pakistan
Proud to be a Jewellery designer
โรงงานสะอาดดี , คุณตอบคนต่างชาติสุภาพดี
ขอบคุณค่ะ
wow nice work
Mantap bos... Semoga sukses selalu salam 1 profesi!..
My dream bzns 😍
Nice works
Im transfixed by how big the first person’s nail beds are. Kinda jealous too
Thank you
SUPER PROFESIONAL 🤩👌👏🙏
thank you
Good instructional video
Hi Jeffery, thanks for your comment.
@@Primarose i am interested to do this job. Can you please share the details, where the training institute is located??
@@mohammednadirkk8514 hi sir, thank you for contacting us. during the pandemic, we don't have the policy to train people. anyway, I will keep your contact, and if the broad has the policy to accept foreign employees, we will not hesitate to contact you.
@@Primarose thank you for your valuable reply. If restart your training please inform me +91 9656933910
Wow! Nice!
Hi Josephine, thanks for your comment.
ua-cam.com/channels/415xqt_DFe_a3e1ylaRFhw.html
very much thanks
Hi Teeka , thanks for your comment :)
Nice video
What type of acid do they use or solution to give it that factory shine at the end of the piece.
sorry for the late reply. I have been off for a while now I'm back. There are many kinds of acids that can clean. but if my memory serves me right it is Nitric please.
You did very well I was happy to see that
thanks
The same industry👍👍👍
Saludos a todo ese gran equipo.
Gracias
Sir how do you coating layer of silver on steel pot make please video sir
good process
Hello Primarose, Your process is really fascinating. Can you please suggest to me what covering sheet you're using to cover the casting flask for no leakage?
Sorry for the late reply please. I have been off for a while now Im back. It is waterproof paper please.
Good job
Beautiful very nice 🇵🇰🇵🇰🇵🇰🇵🇰👍👍👍👍👍🌹
great video, thanks for sharing, do you offer 1 on 1 tutorial ?
Hi Atum, thanks for your comment. Now we don't have a tutorial offer because we are a manufacturing company, but you can ask questions for free if you have :)
Primarose thank you 👌
Itu adonan apa yg di pkai untuk cor lilinnya
Hi sir can you tell me the flask heat timing?
ตอนเทปูน ทำไมไม่ทำตัวดูดออกหน้าต่าง เห็นลมพัดเข้าหาคนเทปูน
ตอนนี้ผมเป็นผุ้จัดการจ่ายงานฝังช่างนอกแล้วครับ เงินเดือนผม 60,000 - 70,000
Can you please tell me how to make the only wax
Please I really want to know about wax
hi, Do you mean how to make a wax prototype?
If yes, please buy the raw wax from the supplier, put it in the injection machine, and then let the machine eject the wax into a rubber mold, please see @0.55
Sir how do you know silver polish on steel pot?
Hi Farukh, you probably mean a steel pot coated with a silver layer? unfortunately, we have not ever used any coated pot. but do not use Brasso to clean because it will make the coating peel away.
@@Primarose yes sir sure video make please sir
But still hand made is more beautiful than machine made...Handicraft is good...
Hi bikash, yes handcrafted jewelry is good and expresses its unique value.
Machine made is just a beautiful because machines had to be made by hand at some point to begin with.
It's the design or the artistry that is most important - It doesn't matter the tool used to convey that.
@t Thanks so much
That's freaking AWESOME!!! LOVE THE CREATIVE PROCESS!!!😁👍🏻
Thank you for your comment
What happens to the green thing? It melts? Where does it go?
It gets burned and blows out as smoke
Layer of chemical comes on it
That debubbleizer could so easily be a vacum pump would be much better
Hi Dave, do you mean debubbleizer @ 4.48?
how did you dissolve the mold? is it soluble in water?
hi rison, the green molds made of wax can not be dissolved in water, so we dissolve them by heat.
@@Primarose no no no, I am asking about the plaster mould. It just dissolved when you sink it
@@rison.prasadkarayil787 yes the hot plaster mold is dissolved when it sinks into cold water.
@@Primarose thanks
@@Primarose is it normal plaster of Paris or ceramic plaster?
Sir, how do you silver polish on steel pot? Please make video please sir
Hi Farukh, thank you for presenting your good idea please. :) Do you mean how to clean the steel pot?
@@Primarose sir no clean only silver polish for steel pot please sir make video
Pregunta porque el casting sale demasiado porosidad gracias
Beautiful work art
재질이 철도 가능한가요?
Dear sir I get porosity in my casting sometimes what's the reason
You didn't prep your casting 'plaster' well enough to remove all the possible bubbles. Some use a vacuum chamber to force out the bubbles before pouring, or vibrator, or combination of both.
Hello,
Would you be able to make custom nose jewelry 14k sterling silver? And do you do wholesale?
sorry for the late reply. I have been off for a while. Yes please we are able to make custom nose rings with 14k gold plated on sterling silver. If you don't mind please give us your email or you can contact sales@primarose.com please.
What resin do you use?
sorry for the late reply. we use wax not resin
Im from.Pakistan and I'm jewelry maker 😍
Hi Bilal
@@Primarose hi
how to deal with broken jewelry candles in a vacuum
Hi kai, the broken candles are considered low-quality candles, so we do not reuse them. If you reuse them, you will get lots of defected-products. We sell them instead.
Непонятно, но очень интересно 👍👍👍🤔🤔🤔
Thank you
Prize all mactions
Does anyone see us about filtering the golden pieces after the casting process and what materials used in that
sorry for the late reply. I have been off for a while which golden pieces do you mean please. I didn't see it.
hey..what type of acid bath do u use? The silver tree looks very clean & white..
sorry for the late reply pls. We use Nitric Acid for the main part
Delhi me kaha par hai ... company batao... coment please
morning where can i found the plaster mixer? it looks good
Sorry, I wanna help but don't know where to buy it in your country.
What is the brand of the casting machine?
Hi Jun, we have many different brands of machines. Most of them are imported from Germany.
Ндаа, с точки зрения охраны труда и безопасности работы, это конечно ... мрак.🙈
Ну а откуда, думаете, берутся дешевые вещи на Aliexpress и тп) Вот именно от копеечной рабочей силы без норм безопасности и без заботы о здоровье
@@MrWolfFenrir Hi Madams First of all, thank you very much for your comment. but let me try to fix some misunderstandings. 1. the products in Aliexpress come from China, they are not related to us at all.
2. I admit that we do not decorate the factory at all in order to "save cost" , as the factory is considered "back end", and we (at first) never plan to make any factory tour or show it to customers. Thus, we just focus merely on "function", not "appearance".
3. Per the safety and healthcare standard, there is just only some key specific areas to be concerned about, that are;
-Labor employment(can not hire kids, and fair welfare)
-Fire safety
-dangerous Chemical management
-Machine/boiler maintenance and control
-Nursing room.
To Summarize, safety and health standard does not relate to how beautiful it is.
Me parece muy rudimentario el "abrir", el molde con una cuchilla,porque mejor se impregna la mitad del molde con talco y se va abrir mas facil sin problema.
Un molde d hule vulcanizado tiene propiedades increibles,despues drvulcanizado se ahoga en petroleo durante 24 horas,el mole se incha hasta un 500 por ciento,mas tarde con perafina obtenemos una copia bastante mas grande igualita.
Espero les sirva. "jnp"
Very good
thanks
Thank you sir jab Mil jaega sar 🙏🙏🙏🙏🙏🙏🏻
Which place is this
I just do this as one person lol not a team of 50 people right now I put out 125 units a month
Do you teach the technique, Brian Smith ? I'd love to learn the basics of jewellery making but can't find anyone local to me, in Lancashire.
@@elaine7872 Lancshire UK?
@@BrianSmith-yq7ys yes, Lancashire uk. Near Preston.
@@elaine7872 I’m in New Jersey if your ever in the US check out the Droughard Jewelry school there’s another more expensive one in sunrise floirida
@@BrianSmith-yq7ys ahh, such is life. It's doubtful I'd ever get over to the US again but thank you so much for replying. I really appreciate it :)
What jewelry the have made
Why are all the minions not yellow?
Hi Daves, which minions do you mean, like in the Disney cartoon?
Can we use bees wax
Thanks for the comment. I have never heard about this before.
Hi, I was wondering if someone could help me out with a problem I’m having. I recently got into wax carving and had several pieces cast in silver. The problem is that every casted piece tarnishes extremely quickly, I’m talking literally a few hours of just lying on my desk after polishing and it already starts to tarnish. I really don’t know what to do about this… Am I doing something wrong or is something wrong with the alloy my caster is using? Or is that a normal thing with casted silver?
Hello Sorry for the late reply please. I have been off for a while now I'm back. Did you place the silver trees in the acid bath after casting?
@@Primarose I suppose my casting company is doing that, I don’t do the casting myself
@@moonmochi5151 ok I think the problems can be either the ingredients or the process because It actually takes time until it tarnishes
Hi, I want to ask you is that you made white gold or silver
Hi sorry for the late reply please, we do silver. sometimes we do brass. We don't do "SOLID" gold but Gold Plating and Gold Vermeil are welcome
Whats the model of the machine at 2:54
after quenching we are heating metal tree with flame and dip a solution pls tell why are we doing this and solution name .
sorry for the late reply. I have been off for a while now I'm back. the big water bath that you see is just normal water please. we do that to cool down the hot tree. For the small bath is acid. we put the tree into it to clean.
what is the solution of water , in which we dip flask after casting,
hi saifi, do you mean water @6.56 right? it is just only pure water, but it looks white in color because of flasks please.
@@Primarose Thanks for your response but how can it dissolve to esay
@@Primarose Pls tell me how can we break easily flask after casting ,, we using kws machine after that we dip it sulfuric acid then water jeting so it consume more time ..pls tell
@@imamuddinsaifi4669 Have you ever tried "cold" water?
or else I think it depends on the flask's material. because the craftsmen said it's just normal water
Wax manufacturing ?where to supply ?
do you mean where should you buy wax?
@@Primarose actually sir we are starting veccum casting process in silver so wax manufacturing kaha se karte hoo means supply karte hoo so I need contact of wax manufacturer for veccum casting machines
@@TheRajkotians ok understand. It seems that we are living in different countries so it is hard to recommend because I know just only suppliers in my country. However, the price should not exceed 0.7 USD /kg.
With the little, thin face mask stop the toxic fumes from entering his body?
He has very feminine hands
Hi bullourias, thanks for your recommendation. We change the masks now to be thicker ones. We sometimes tell our employees to open the machines pulling toxic fumes away.
That a little and thim face masks now protecting us from covid-19 :D
No me enteré de nada, esto que es?
Es el proseso llamado vasiado de Joyeria de fantasia o metales presiosos plata uo oro
Hi Calos, Es un proceso de fundición de joyas.
Where is the company..??
Hi Sahir, our company and our factory are located in Thailand
@@Primarose are you provide training in casting. If yes plz contact me 9656933910(india, whatsapp or call)
Anna naku gold work nerpistara
poor guy pouring the investment probably has silicosis by now. always wear proper protection!
bhai silekun sai lagauo dai nhe cipkege,
sir should i get small setuo for my work shop
of course, you can have your own small studio. we will give an encouragement for you to make it happend
I want information on the location of the factory and the name of the company
Hi, sorry for the late reply. Please check our website :)
www.primarose.com/
In Which country this
hi senator, our company and our factory are located in Thailand
Who lost the wax?
Hi sir, the vacuum machine lost the wax by heat sir
I need a job in this field I am from india and know everything abut this
You can make gun by casting
Yes, it's real, but you will need to use a lathe for precise parts. In one of our videos, we made a jewelry ring out of a piece of chocolate))
I swear I thought I was about to hear the macerena around the 2:30 second mark
There are no vacancies for work? setting please tell me 🙏
HI Baiman, thank you for your question and sorry for my late reply. currently, we don't have vacancies for work please. If there are some vacancies available, we will disseminate the news further and may keep your contact.
If there is, please tell me to work somewhere else
Where this factory?
Saiful Islam Pandora
Hi Saiful, our company and our factory are located in Thailand
@@seongchoi6762 Pandora has its own factory. We are not manufacturing for Pandora now.
07:07 wich acid is it ?
Hi Walid, 7.07 is normal cold water please but 7.18 is sulfuric acid
Из рубрики-Нихуя не понял,но очень интересно.
А я в деревне до сих пор только молотком и зубилом Ювилирку ваяю.
Sir, How much Sludge ( waste) is generated per kilogram and how much precious metals are recovered?
Hi Parak, sorry for the late reply. waste from which step do you mean. I mean there are many steps of making jewelry and each step generates a different rate of the waste.
Wow
Sa philippines po ba ito?
hi Pepe, Hindi, ito ay sa Thailand
Chyna sweat shop?
Thank you for your comment. now we are not living in China
Vendem para o Brasil? Contato!
Sim, vendemos em todo o mundo, inclusive no Brasil.
Visite nosso website primarose.com
ou contato sales@primarose.com
Sir pwede ba mag pagawa sainyo?
Ужас, сколько оборудования для выпуска каких-то побрякушек...
Что в конечном итоге получилось-то?
Thank you for your comment please. Actually, the jewelry's value is not trivial. Jewelry made of silver is considered semi-fine jewelry. The value of products depends on the materials and worker's skills, not the appearance of the factory. Thank you.
👍👍👍👍
Why so complicated for a ring when you can cast a tube and slice the rings off it?
Hi Andrew, when it comes to complex rings with complex patterns, casting is the better process please.
A lot of the rings are basic ones with no pattern though. That’s pretty clear from the wax positives.
@@iqinsanity Hi Andrew I understand your point now. we always avoid casting something "big", long, and "smooth" surface because such work often easily evokes lots of problems, especially orange-surface defects (I don't know what this defect is called in English). When customers request products like smooth big jewelry, we need to cast them in small pieces and welding them after that, or switch to other production techniques. (in order to provide best quality of work without orange-surfaces)
и тут я со своими 100 граммами кбольта
Price
Hi, sorry for the late reply, price depends on the shape and weight of each product. If you are interested, please send a picture, dimension, and weight to get estimated prices "Free".
Se les acabó el chollo a los jolleros
Украшение?
HI, не украшать, это процесс литья
digital timer
amzn.to/3mgcPW1
Hi Erdi. thank you for telling us about your jewelry cleaner.
👍
I am casting Wark jewelry and indian
9079214394
Hi Marcelo, thanks for your comment.