What do they do with the burrs that come out during gold processing?
Вставка
- Опубліковано 13 чер 2021
- Hello everyone, the answer to the question of what you do with the gold pieces that fall on the ground during the process you always ask is in this video.
Have a good time :)
Other sections:
• Cumhuriyet altınını na...
My social media accounts:
►UA-cam: goo.gl/WVW759
You can share my video on my social media accounts :) - Навчання та стиль
Сам ювелир, посмотрел ролик, волосы дыбом встали. По качеству отливок, по инструментарию, по количеству стружки, да еще и под ногами складывается впечатление что это слесарный цех, а не ювелирная мастерская.
Для столь дорогого материала как то все плохо организовано... Одни точат, другие в телефоне залипают... Объем стружки как будто детали точат... Скорее всего это что то с минимальным содержанием золота или бижутерия из латуни.
Согласен,сток соли туда впихнул и соды чё окуеть можно все на глаз...засипал...Кусочки земли и пластмаси... 💯 Пудов там примеси дохуя и это не Золото ,а Латунь...
Чего только не делают ради контента.. бронза латунь медь😁
Такие опилки с пола только на аффинаж сдаются.Бред какой-то.
Условия пипец, такое чувство что попал в подвал где делают барахло для Алика... Как по мне в хорошем цеху должно быть чисто как в нормальной частной клинике. А тут срач и нарушение техники безопасности
Это токарь просто золотые руки... золотые зубы, да в принципе у него и дома всё золотое.😄
😁😂😁
I use to repair these kinds of machines. I always like working on the ones machining precious metals because they were always spotless when I arrived. Never a chip in sight. :-)
👍💯👍
10:35 - Always remember to pre-heat your molds, to prevent a steam explosion.
💯👍👍💯
Always pre heat your oiled oven pan for good roast potatoes. Seems good ideas are good ideas for other stuff :)
seems a bit casual in this shop! I once worked in a plating shop where gold plating was done. The gold anodes were very carefully weighed at the start and at the end of a shift, to prevent anyone taking a few "slivers" of metal
步
@Jurtez Lupa you do that if it makes you happy, but remember...thieves will not inherit the kingdom of God
@@GOLDSMITHEXILE 🐕👺
Could be a family run business where things are more loose
@@GOLDSMITHEXILE God is a thief
"Hey y'all, the vacuum broke again. Imma take it home to fix it👍."
😂😂😂😂
😂😂😂😂😂😂
Jerry, this is third time in this month, also congrats on the new car mate!
Amazing proces. Thank you😀😍
Parabéns! Gratidão sempre!
I'm so triggered by the fact that he just threw in that random green piece of trash in with the gold. I mean I know it will get burnt out, but still!! Just take it out man!
4:28 he picked it out
@@benjames8211 6:12 he didn’t
@@benjames8211 nah bro 6:08 he just threw that shit in there. I feel like he did that shit just to trigger people lmfao it was sitting directly on top of that scoop.
He didn't pick it up because it was totally irrelevant.
The only relevant materials in that moment were other metals (magnet use), the rest goes up in smoke and doesn't influence the process whatsoever.
They are not coiffeuring dolls in there...
@@jackwhatever4749 Did you even read my original comment?
Putting our time and effort in activities and investments that will yield a profitable return in the future is what we should be aiming for. Success depends on the actions or steps you take to achieve it. Show me a man without investment and I'll tell you how long it takes to go bankrupt. Investing creates a safe haven for the future. With the right investment choice that has at least a 10% minimum risk and with the advice of an expert, profits and interest is guaranteed.
Starting early is the best way of getting ahead to build wealth, investing remains a priority. The stock market has plenty of opportunities to earn a decent payouts, with the right skills and proper understanding of how the market works.
Binary trading is a good and reliable way of building wealth which also create opportunities for crypto Believers.
@@hassanrahman3524 Venturing into the bitcoin without an adequate orientation with a professional broker for accurate signals, you might lose all your hard-earned money
@@hassanrahman3524 You see in trading cryptocurrency, one requires more than just a primary knowledge of crypto. It is best to trade with an expert to avoid unnecessary losses. It's advisable to have a professional trader/broker who is an expert in the field to help you manage your account.
I'm into Real Estate, but I took the decision to invest in the Crypto market and I have been getting good returns on my investments. The market is also an effective way to grow wealth.
I bet they only have those 5lbs of gold that they keep processing and remelting over and over again. And they make videos of it. With 10 million clicks in 9 months per video, you can already keep a business going. Great idea. Thumbs up!
De hecho no parece oro , parece bronce ,inclusive cobre del rojizo.
I love the complete lack of safety equipment and the little pieces of paper that ended up in the furnace.
Agreed
...Had me mesmerised. Gave me a mild case of the gold fever.
I NEED THAT BAR IN MY LIFE!!
When the vacuum has more value than your house.
I added it up to $9k usd. No offence, but I don’t wanna see where you live. 😜
@@DrFiero even if its 90k USD lets say.. Still a shack in where I live(NL)
@@kookaburra574 - I lived in Vancouver for 50 years before moving to the prairies. 90k wouldn't get you the doorknobs for the garage. ;)
In some rare valuable metal processing plants they actually have special rollers their employees step on when they leave that pull the tiny partials of gold and other precious metals that get past their primary recovery systems into the air, onto the floor, and eventually stepped on and onto the shoes of employees. The rollers clean the shoes of the tiny particulate and collect it. They said throughout the year the machine collects nearly $40K in gold and other rare metals they produce. Very cool!
You’ve ever seen that one video of the guy who gets gold and other metals from cracks in the sidewalk ?
@@jerseydevil1 i know there's platinum and stuff on the highways from catalytic converters, why would their be gold on the sidewalk ?
Repent to Jesus Christ
“And now these three remain: faith, hope and love. But the greatest of these is love.”
1 Corinthians 13:13 NIV
@@repentoryouwilllikewiseper8741 no thx
@@ATLTraveler lol idek really but search it up it’s pretty interesting
Woooow ❤️ etkileyici ve cok guzel bir videoydu. El amegi ❤️🙏🙏
Eu limpo essa oficina com maior prazer!
Olha, um BR. Olá amigo, vc gosta de pipoca?
Eu tbm e não quero nem salário, só quero sair com o saco do aspirador de pó pra jogar fora...
@@vgzinnt7217 vc disse pipoca?
@@dariojunio9798 pipoca
Não se trabalha com ouro desta forma... ourivesaria de ouro é muito cuidado...estranho!
가공 중에 떨어져 나오는 거를 해리라고 합니다.아무리 자석으로 걸러 내더라도 자성에 반응 안하는 금속들도 있을 수 있습니다.이래저래 녹이면 녹일 수록 불순물들이 달라 붙어 품질이 떨어져 정밀검사후 순금 함량이 몇 퍼센트인지 확인 후 14k 18k등으로 가공합니다
23.9 karat gold happy now 😑
자석으로 거르고 마지막에 산으로 조져도 불순물은 어쩔수 없나보군요
Esse ar comprimido em contato com a pele é um perigo cara. Já trabalhei com material em altas temperaturas e o mais perigoso sempre foi o uso inadequado de ar comprimido. O ar comprimido e lubrificado com fluídos, se esses fluídos entrarem na corrente sanguínea o resultado não vai ser nada agradável, fora os danos na superfície da pele causados pelo força do ar, que pode chegar a causar enfisema subcutâneo.
Cara, Vc está fazendo um exagero, nem todo ar comprimido provoca isso, e nem todo compresso usa óleo, vide os compressores medicinais e para o setor alimentício
Très intéressant, toujours amusant de voir les normes de sécurité selon les pays. Là ils manipulent le métal en fusion..... en chausettes 😁
Welcome to Turkey 😄
Heureusement qu'il y a les crocs de sécurité 😂
@@bricejacquin4432 c'est vrai. xD
💯👍👌
C’est des chaussettes de sécurité
Капнул мимо немного..Но на кольцо хватит.
Ахаха
My parents had a jeweller shop when I was young.
We'd use a polishing wheel to polish rings or any other gold jewel (silver too) to give them a rapid shine after a repair or whatever.
This polishing wheel had an integrated vaccum with a filter.
A specialized company was buying those filters for good money just to salvage gold dust.
La.g
Hayırlı cumalar
Do u give money for that
I would tell that company to fuck off and i would clean and recycle that myself
Лдлиилаожров пить от вас ЧС об то р уж ты их иП как цуп
Beautiful process 👌
What a nice, clean facility.
Уборка во дворце в Геленджике
Gotta love the security sign on the door to the acid room telling you to use goggles, gloves etc. And nothing is used what so ever.
I was thinking the same thing 🤔
Bad company
Maravilloso trabajo y muy peligroso.
Everyone has a very important job. Fascinating process. From Sacramento, California 👌🥰🙏
In Michigan there was a shop that specialized in machining titanium to make impellers for subs. They had metal detectors at all exits for employees. Stuffing pockets with chips can be big money in the right shop
😯😯
This is pretty common in the industry. I did some consultant work for Heraeus metal processing in LA, and we had to go through Sally ports with metal detectors on the way in and out. I was told they process over a billion worth of precious metals in that one facility.
Hell we had people taking copper chips, weld tips and any chunk they could conceal at a weld factory I worked at.
It's insane govt facility's making computor chips for millitary aircraft don't have metal detectors but scrap processing plants here do its comical actually
@@bobbouchee1452 It's because the govt doesn't have a profit motive. They just take money from taxpayers so why should they care if they lose money? They can just print some more or tax some more. They don't care.
Для этих целей нужен не обычный пылесос, а пневматический, работающий от компрессора
А я все ждал что в конце уборки он высыпет содержимое пылесборника в унитаз и смоет )
@@denischas4602 с виду обычная бронзовая стружка
Видно, что это не золото
@@user-hj6dp4hi9j да золото это. Просто процесс производства похабно устроен.
Parabéns pelo trabalho
👌👍💯
Young Man is very skillful,
And the whole process of turning those scrapings of Gold burs into a Gold Bar was very Impressive. 👍
100 gram veya daha küçük külçeler presle üretiliyor sanırım ama örneğin 1 kiloluk külçeleri dökerken, ağırlık olarak bu kadar hassas nasıl yapılabiliyor? Hem çok hassas olarak ağırlık ölçülmeli, hem de çok sıcak. Biraz fazla döküp sonradan balans ayarı yapar gibi düzeltme mi yapılıyor?
666⁶
Pek bilmiyorum ama oradaki degisik ayardaki altin tozlari birbirine karismadimi
Судя по количеству отходов это совсем не золото
Латунь?
С чего ты взял? Ты специалист?ювелир?
@@softerhack_android7468 я вижу, что ты специалист-ювелир.)
@@user-uu8ep2xw5j я не ювелир,но я держал в руках разные металлы,включая латунь и золото.
И могу сказать что на видео,и правда золото.
Только другого сорта.
И тем более у латуни цвет бледно-желтый.
No coolant 😍😍 The machine's so dry and clean 🥰🥰
no need for coolant gold is a great conductor of heat same goes for copper and aluminum.
What are the different things being added and why? Like the powders on the crucible and whatever was being applied to the mould? Great video.
So good questions. The powder is borax. It helps bring out impurities within the metal you are smelting. As for the oil like substance; probably a lubricant to reduce the chances of the bar melting to crucible. It probably also gets rid of any grime or moisture.
Scrap turned Liquid Gold into fine Bar…… 👌🏽
-Так вы куда это с пылесосом?
-да я только пыль вытрехнуть.
- смотри мне пылесос не слямзи я тебя запомнил🤨
Поржал
11:25 There is a drop left on the outside of the mold.
slag
@@marcusmt4746 Regardless, when working with gold you can reprocess the slag to recover some gold. After watching this channel for a bit, they are pretty careless with their "gold" so I often have to doubt if its really gold as they claim. That or they have more money than what they know to do with
There is nothing stopping him from putting it aside for the next pour no need to go ham for a small drop that can wait another day
Автору на заметку! Заусеница бывает у самой детали, а то ,что обработанно- это стружка !
I’m saving all my wood shavings I figure it is worth it’s weight in gold at this point.
Basically
Make sure your wood shaving investment does not go up in a cloud of smoke when you melt it down. 😄
Lol I love it
It was. Lumbar prices fell dramatically.
@@Gravvvyyy जेड,,,,,,जेड,,,,,,,,जेड😙😙😙😙😙😙
OK When your vacuum stops working I want it LOL
bi soru sorcam altın işlerken frezede veya torna veya başka bişey soğutma sıvısı kullanılırmı.neden?
Bence kullanılmaz, altın yumuşak bir metal. Soğutma sıvısı sert metalleri işlerken kullanılıyor.
I worked for induction technology corporation and inducto therm, building electric furnaces and power supply units for processing and converting gold and other precious metals into bullion and bars. When we would get the furnaces back for servicing, I would collect the slag and pure metals that would spill out of the crucible and into the furnace, where I would collect and pawn it. Mostly it was gold, silver and platinum. I remember that one of our clients was Englehart. There were many other gold processing companies, unfortunately their names are lost to me. We had clients all over the world that had new induction furnaces made and or reconditioned. Cool video, definitely takes me back a few years.
По-моему, это обыкновенная латунь! 😁
Согласен держал легко руках весо не чувствовал
@@user-lc5us8zy2o или бронза
Non..
Look at the end of the video. A tiny ingot weighs 1.5 Kg. Such a small ingot of another metal like brass would not be 1.5 Kg. Gold is heavier than lead of the same volume. This ignot is probably 75% (18 carat) or slightly less gold.
@@danhilti8543 The ingots appear to have never been tampered. They appear to be weighed while in liquid form.
Это было очевидно а вот на несколько минут растягивать видео в моменте где он пылесосит , ну такое себе))
Да по-любому мешки для сбора пыли домой уносят бонусом а к концу года глядишь Лексус
@@user-do7cu8dm2j пылесос безмешковый ведь ,контейнерного типа
That would make an excellent scrubber for pots and pans
Too soft
Fatih bey sana teşekurle olsun bu işleri gözel tahkip ediyorsun .birde yakutun testini nasil yapiliyor. Elmasin testini bize gösterdin yakutunun da testini gösterir misin memnun olurum kanalinizi beğeniyorum hoşça kaliniz
Интересно, какое изделие из золота можно обработать на токарном станке, чтоб осталось так много стружки???
Золотой самотык что-ли ?
Ну бля, отличный комментарий. 😄👍
Золотой пи3ды колпак
Ёршик)
@@evgenynikitov5561 точно
К примеру очиститель воздуха на косметической станции в жилом блоке вес изделия 16 кг
Мне кажется, в таких цехах на рабочего выделяется напр. 100 г. драг. метталл или сколько ему необходимо в рабочую смену, и потом всё это звещивается изделия, отход и т.д. если будет недохватать предел допустимой нормы, то логично рабочий за это отвечает.
Это называется установленные нормы потерь.
На бирке их тоже указывают.
The best type of cleaning job you could ever expect to do lol
Да, ну вы и ювелиры конечно, у нас слесари и то аккуратнее работают..
En este video solo se mostro el proceso de recuperacion del oro. Y claro que es oro, pues ese proceso es costoso para otro metal como el bronce o el cobre que solo vale la pena fundirlo por toneladas o por cientos de kilos
Ну фиг знает на счёт слесарей, конечно))
У нас в ЖЭКе такие слесари работают, что эти турки/индусы смотрятся на их фоне интеллегентами)
Lindo de ver!!!!
Perfeito
Dónde trabajaba antes de maquinar se pesaba el material y al terminar el proceso, se vuelve a pesar hay un poco de perdida, pero debe de ser mínima, esto en cada proceso, torno, fresado o vaciado 🤷🤷🤷
siento raro el vídeo, algo no esta bien ahí; es mucho dinero tirado en el suelo y en todas partes, se que las empresas que trabajan con oro no tienen instalación impecables mas si son limpias, aquí veo gramos de (oro) como si fuera hierro tirado en el suelo.
I was half expecting to find somebody commenting "why don't they just use a magnet". Nobody's that dumb I guess 😂
very interisting to watch this kind of content
Кутикулами ещё назовите. Стружка.)
Rapaz Nunca nem vi uma limpeza tão bem feita , se lixo fosse ouro não existiria preguiçoso🤣
if garbage were gold the gold economy would be flooded and gold would be worth less than lead
😂😂
kkkkkkk kkkkkkk kkkkkkk kkkkkkk kkkkkkk kkkkkkk kkkkkkk essa é boa
Good job for clean nice . Good amazing 👍👏👏 from India🇮🇳
Some skill with that hoover, calm and collected.
Это стружка, а заусенцы у тебя на руках, после рукопашки.
После прополки в огороде чаще
Я говорю "сбой",а это и правда всего то голдовая стружка 😁👈
This is the first time I ever seen machinery CLEANED ! Lol..
hahahahahaha yess!!!
Они бы так относились к любым материалам. А не только к золоту. Жаль что на планете нет людей а так, просто пассажиры временные
Вот к человеку бы так относились
That was cool to watch 😊
Hortumun ucuna Kucuk bir perde yada koltuk başlığı taksanız cok daha rahat olur
اللهم اتنا في الدنيا حسنة وفي الاخر حسنة وقنا عذاب النار اللهم اجرنا من حر جهنم
Amin 🌹
At 11:26 “Oops. Ah dangit. I missed the mold again… I’m not gonna weigh these little overpour buttons. I’ll just say there must’ve been some impurities burned off during the melt.”
He could've pocketed a nice little button sized cheque if noone was looking 😅🤫
Great job man from italy👍
That's the quietest vacuum I've never heard
I thought that😂
If only my mum had that when I was younger
*ever
Охренеть я токарем работаю ,постоянно в носках рабочих стружка остаётся,так можно домой потихоньку и натаскать ))но думаю там и в жопе эту стружку найдут если захотят
Я ювелир и наверно уже от каждого своего знакомого слышал - ты наверно домой кучу золота натоскал? Я уже им не объясняю что золото берется с клиента под запись и за каждый проебанный грамм придётся платить со своего кармана
Я- сантехник. У нас этого гомна навалом. И нам совсем не запрещают его брать домой...
@@user-fd6ip4nn1c многие лапоухие, и проверять до грамма не будут
@@user-pq1ty9sg9v
9
Был репортаж с золотого завода,там заставляли всех раздевается ,принемать душ и потом одевали раб форму,при выходе все повторялось,плюс сканер чтоб в ж не пронесли
Kerajinan tangan yang sangat hebat, makasih ilmunya kak
you guys have some Super clean machine tools because of it I wish mine look like that LoL
Примерно так и представлял себе. Спасибо вам за видео что снимаете. Очень интересно
А зачем тебе это представлять, дел других нет?)
Там киллограм в шланге остался😁
“Gold processing”? What exactly doe’s machining gold have to do with processing?
Kapalıçarşı'da ( Altın Ustalarının bulunduğu)kanalizasyon dan altın parçaları toplayan adamlar vardı bir zamanlar diye hatırlıyorum acaba yanlış mı hatirliyorum
2
Esse aspirador, vale ouro!
450000 eur
Me gustó trabajo dedicación e inteligenciaen el muchacho muy buen video
They use it to scrape cooking pans ?
Та самая работа когда радуешься каждой заусенице принесенной домой на руках🤣🤣🤣
Quiero ese aspirador después de una semana de uso😁,yo lo limpio y te lo devuelvo😅
¿Puedo ayudarte a limpiar la aspiradora? :) :)
Let's take off our shoes inside a shop and wear slides. Yep. Totally safety conscious 👌
It's to avoid theft
Hold on those might be crocs
Waw this is beautifull..😊❤❤
Excellent recovery.
Золотой токарь,золотой станок и золотой пылесос.)
I think I'd paint everything inside the cabinet Matt black personally.
Good idea
That is a very Good Ideal!
Yes, I also cook my gold burrs with salt. I like to also add some garlic and basil in the process.
Oh well, maybe that was a different recipe.......
3:13 "кем ты работаешь, сынок?
Да никем... золото пылесосом убираю..."🤣
Oh yeah, now that's 24k right there. That cigarette butt just adds extra filtering in the process 👌
Yeah, he have supposed to be fired
Lmao!!
Lo que más me impresionó fue la poca seguridad laboral que tienen, se imaginan trabajar con sandalias croc y sin guantes o cubrebocas para no inhalar tantos químicos! wtf!
Bienvenido a Asia 😂
Jajaja, sí, fue lo primero que pensé, con lo joven que es y está inhalando gases de todo tipo y apelando a la suerte. Qué triste.
@@sabiduriayfe6088
🗺️😂
esses cavacos valem ouro
How much would those shaving be worth after it was melted back into that bar?
Roughly $9000usd if I did my math right!
Это где так с золотом работают ?? Хотя судя по огромным стружкам это латунь или бронза . Я был на заводе где производят золотые украшения там такого бардака нет .
The most expensive "steel wool" ever. Gold wool
Nah, most expensive dish scrubber 😉
¿Cuál es el precio de esa barra de oro?
Y la gota que cayo por fuera? esa es para el fundidor?
Тот случай когда я бы подмел а мусор себе бы оставили
Milyonların aklındaki soru:)
Acaba kaç paradır
Is the gold hot when you pour it out of the cup?
Yerden fırça ile süpürdüğü şeyler içinde toz toprak yok muydu? Onlar da girmedi mi külçenin içine şimdi?