ULTIMATE Product to Remove and Prevent Rust From a Table Saw.
Вставка
- Опубліковано 1 сер 2024
- If you are wanting to remove rust from your table saw top and protect the saw top from rusting, this package is an all in one solution. You also use this to clean a saw blades! The saw blade cleaner worked great to remove pitch, resin and gum build up on your saw blades. Amazon and other affiliate links are used in this description and they help support this channel.
Become a 731 channel member here for exclusive discounts, perks and behind the scene footage: / @731woodworks
Supplies Used in This Build
Boeshield Protectant Pack: amzn.to/3n6Y2wB
Steel Wool: amzn.to/3lgvX5I
Videos To Watch Next
Brother Riv Wahuda Unboxing Video: • Wahuda Bench Top Joint...
Paste Wax Uses: • Watch This Before Buyi...
Woodworking tips and tricks: • Jointing with a Table Saw
I use TubeBuddy to help grow this channel and you can too by using affiliate code 731woodworks at this link www.tubebuddy.com/731woodworks
Get two FREE audio books from Audible by using this link: amzn.to/3cqvgmv I listen to a lot of books while woodworking. Give it a try, you may love it as much as I do!
Camera Equipment Used for Videos
Canon M50 amzn.to/3en9EaQ
Canon 22mm Lens: amzn.to/32fp79w
Microphone I Use: amzn.to/3crbxTX
0:00 Intro
2:24 Cleaning Saw Blades
5:14 Remove Rust From A Table Saw
7:14 Prevent Rust From Table Saw
9:22 Prevent Rust On A Jointer
10:04 Prevent Rust On A Planer Bed
10:38 Before And After Does it Work?
11:38 Outro
Disclaimer: Amazon and other affiliate links are used in this description and they help support this channel. By clicking on the links and purchasing items it provides me a very small commission but cost you nothing extra. It is a great way to support small creators like me. I appreciate the support more than you know!
Working with wood and power tools is inherently dangerous. Anyone using any of the tools or supplies used in these videos are personally responsible for learning the proper techniques involved, and he or she assumes all risks and accepts complete responsibility for any and all damages and injury of any kind.
Before using any hand or power tool with which you are unfamiliar, consult its operating instructions, and if necessary, seek instruction by a qualified person well versed in its operation and appropriate safety techniques.
731 Woodworks is intended for entertainment purposes only. There are no warranties implied and your results may differ from ours. You should NOT rely solely upon the information and techniques discussed and displayed in these videos. Rather, you should fully research each technique and decide for yourself what is the safest possible work method for you. - Навчання та стиль
For More Woodworking Tips and Tricks, check out his playlist: ua-cam.com/video/jsClV9zZNLM/v-deo.html
So several months later how did it hold up in comparison
I've been using those three products for several years. An old tooth brush works great when cleaning the blade. I use it on my router bits as well. The odor of the rust remover is pretty strong as you indicated but it works.
Grate video Matt. Thanks for keeping us entertained!!! Looking forward to every video you put up!
👊🏻
Love the videos man, I’m a Canadian planning on starting wood working as a hobby. It’s nice to watch your videos and get instruction with a dose of humour that’s much needed in this pandemic. Cheers 🍻
Thanks 👍
I’ve heard that stuff is great. Thanks for the video Matt gunna have to order some of that for my new Delta table saw.
It’s good stuff
Thanks bud for the video I just said yesterday I got to find something to do my machine and going to try this out just ordered a couple of kits now thanks again
Awesome 👊🏻
I use paste wax on my table saw, but it's nice to know that more specific products exist for this. Thanks for sharing!
👊🏻
Happy Thanksgiving to you, Mrs. 731 and the family. Your channel is an inspiration. I plan to make the noodle board first. Keep up the good work!
Happy Thanksgiving
The things you do for us subscribers; (Stinky rust spray), much appreciated! 😁👍
👊🏻
I just got a new to me used powermatic 10 inch saw and I cleaned it up with what I had. Now I can order this and see how much better it can get. Thank you for sharing.
👊🏻
I love Boeshield T-9. It also works great on vehicles/boats on bits you want lubricated but not greasy to collect grime.
Nice
Ive been using them for years good stuff
👊🏻
Recently started using T9 as well! Man does that rust remover smelllll! Nice video Matt!
Yes it does!
Great videos. I have the same model saw with the same rust issue. I will certainly give the Boeshield a try. I also use a CMT 251.042.10 ITK blade 1FTB+2ATB. Unbelievable noise and vibration reduction.
👍🏻
I discovered the Boeshield lubricant and rust remover at the beginning of the summer. I'm in southeast GA and our humidity is unparalleled. I have to reapply it every couple months, or if i see a little rust spot start to pop up I'll use the rust remover to knock it out. I would advise you to go ahead and buy a larger can of the T-9 because it goes fast. Good luck with it and thanks for your enthusiasm and content.....keep it coming!
👍🏻
Good stuff! Hilarious! Keep em coming!
👊🏻
These products all work great, as far as the smell, ya There’s that!
👍🏻
I love your channel
Thank you
I clean my table saw blade with "whitespirit" or turpentine, if its gummed up with pine. If it´s pitch from hardwood I´ll throw the blade in bucket of water and let it sit there for couple of hours. Then I use synthetic paint brush with bristles cut short to make it stiffer. Super easy to clean that way.
Cool thanks
Happy Thanksgiving! Hope you and yours have a blessed day. As for me, I'm a big fan of paste wax after a good cleaning and rust removal. I've also used and really like Bostik Top-Cote. That stuff is great in my opinion. I've heard mixed reviews about T-9 but admittingly haven't tried it yet.
Happy Thanksgiving
I will tell you the T9 works awesome! I have a CNC that I run flood coolant on and I have tried everything to keep my vise and tooling plate from rusting and nothing worked until I used the T9. I have been using that stuff called Awesome to clean my blades and it works great, but I let my blades soak for about 30 minutes in a bucket lid of solution and there no scrubbing. All my tools with metal or cast iron surfaces have been getting that T9 for the last couple years.
It's great stuff!
Happy Thanksgiving to you and your family.
Happy Thanksgiving
*glove snaps*
"Doctor."
"Doctor."
"Doctor!"
That gave me a good chuckle.
👊🏻🤣
Happy Thanksgiving!! God Bless
Happy Thanksgiving
I have a bad habit of putting my hands down on my cast iron tables, especially in the summer, and end up with rust from it. Going to have to give this stuff a try.
👊🏻
Great videos ! Such an inspirational guy, im just learning woodworking doing kitchen and bathroom remodeling with trim carpenter of 35 years. During a recent kitchen remodel i decided to keep all the cabinet doors and hinges, any ideas or anything you or the guys in the CS can think of what I can do with them? Really appreciate your videos and your time to read this comment ! Keep up the great work !
I'm not sure, you could add some storage cabinets in the house or shop and use the hardware?
Pretty interesting stuff, Matt! Thanks a lot! 😃
For now I only have a miter saw and a drill press... But I already need to take care of them. 😬
I guess around January I can buy a table saw as well. 😊
Anyway, stay safe there with your family! 🖖😊
Thank you
I use the CMT orange bit and blade cleaner also use Simple green, but the purple one as its less harsh on coatings, put the blade in a 5 gal bucket lid, pour enough Simple green to cover, let it sit for 10-15, scrub with a fine brass brush.
Cool
Oh and Mrs 731 knows better.... he who smelt it felt it! Lol happy thanksgiving man
Happy Thanksgiving
Brother Mat first thing is it's so great to see you strong in your walk with the Lord 🙏 and share it with us. Love your videos. A little tip use a stiff fiber type brush to clean your blades on the top of a bucket lid the results are awesome. Loved your wooden malet build and yes the Lord was at work there. Bostic top coat is a great product but very expensive T-9 is wonderful as well. Best wishes to you and your family from Alaska at grandpa's wood wood shop
Thank you
Matt.. I love all your videos! In a future video could you use your new jointer? Especially on longer boards. I'm thinking about buying one, just don't know if a table top jointer works well on longer boards. I trust your opinion! Thanks! Keep making those great videos!!
Thank you
I use the top of a home depot bucket and some similar blade and bit cleaner and and old tooth brush. Very fast and easy. (CMT Formula 2050 Blade and Bit Cleaner)
Awesome
I use a bucket lid or frisbee under the blade when I'm cleaning it. I gave always used Simple Green and a stiff nylon brush. But I'm going to give this stuff a go next time.
Thank you for the recommendation. Happy Thanksgiving!
"have" not "gave" (I'm on my phone🤪)
Thank you
So I just began woodworking with limited tools. Two drills, and a jigsaw. I kindly wanted to ask if maybe you can put together a video on a build just using those power tools? I know it's a challenge and I'm making due with what I have. I'm just curious to see what you might be able to cook up? Excited to see if you're up for the challenge. I've found a lot of informative woodworking channels on here. But by far your channel might be one of the most authentic and inspiring. Keep up the great work and God bless.
Thank you
Don’t do a lot of pine cutting/routing but still get some pitch on blades/bits. I normally clean them with hot soapy water in the kitchen sink, then hit them with an old tooth brush. Rinse & dry, good as new.
👍🏻
Thanks for another fine video! Apparently, there are things in Boeshield that do not allow it to be air shipped which puts a crimp in shipping. Shipping is $8 on Amazon for this 4 oz kit. I like to use affiliate links to support the channel but I would rather invest the $8 towards the larger kit size because of the number of tools I have. I am lucky enough to have Rockler and Woodcraft nearby. So maybe my support will be a T shirt instead. Keep up the great work Matt and best wishes for the whole family!
Mine shipped free, but I have Prime.
I just watched a Stumpy Nubs video on blade cleaning and he used a different cleaner but had a couple more great tips for blade cleaning. First was he used the lid of a 5 gallon bucket to put the blade in and spray it with cleaner and let it soak, was pretty much perfect size. The other was using a nylon stiff brush. I bet if you adopted those two tricks you'd get that last bit of resin just a bit easier.... makes me think I should possibly clean my blade now that i've seen two videos on it in two days, the universe is trying to tell me something ;)
ha maybe so. It makes a difference
Happy Thanksgiving.
Happy Thanksgiving
I'm gonna nag to have to try that. I need to clean my blades. I bought some Diablo blades for my table saw and miter saw. Used them once... Then I let my brother come over and use my shop. He had a bunch of green pine. It was wet and gummy. When he left my blade and cross cut sled were covered in green gummy crud. I wanted to beat him. Can't wait to try that blade cleaner. I don't know about the rust remover. Lol. I do have some rust on my table saw from a leak.
👍🏻
Great, will give it a try. Have my nose clothes pin ready for rust remover. Thanks!
It works well
Hey Matt, I was watching a few more videos. I thought of an idea for another video or even series for you to think about. Could you give your subscribers some ideas on how to save time on building projects? Like you, I have a full time job. If I can save time on projects it just equals more money I can make in the time I have to dedicate in the shop. As always, thanks for the content.
Thank you for the ideas
Power tip for you. Get a lid for a 5 gallon bucket. The saw blade fits right in an you can spray the cleaner and let it soak for a bit. Then use a grout brush to clean the teeth.
👊🏻
I’ve got T9, and I don’t like it as much as I like and prefer to use Bostik Glidecoat and CRC 3-36.
👍🏻
CMT makes a good blade and pitch cleaner. a brass brush makes quick work of cleaning on and between the teeth.
Thank you
I always take my saw teeth to my dentist and have them cleaned😋🤯
Well Alright alright alright Brother Matt I’m going to order me some. You just learnt me something new bro. Looking forward to chasing my wife out the garage with that stinky stuff. She always want to talk with me in the middle of wood working lol. Can’t handle the smell get out of my shop/garage
🤜🏼🤛🏼🇺🇸🇺🇸🇺🇸🇺🇸
Ha ha 👊🏻
I use the "Top Saver" version of this stuff.
nice
Thanks for the video. It inspired me to do some shop tool maintenance. I have some of that rust remover. It's the worst smelling stuff I have in the shop. That's one of those situations where a mask is actually a good idea :-) It's bad.
Thanks
I live in southwest Florida and I tried the T9 and just doesn't work for any length of time. I have not tried the other products yet
There’s a like dentist picks. There’s four of them, and they would be awesome on getting in the cracks and crannies. Dig that stuff right out of those tight parts. Get them at most tool places.
Good idea
I’m wondering when are you going to review the wahuda jointer
I want to use it a while to give a good review.
@@731Woodworks that’s good but I don’t see you building anything
Matt you need to clean around the teeth with a brass bristle brush instead of a rag. Dont have to worry about nicking the fingers.
Thank you
Spies Like Us AND Moana references in the same video?
I had to laugh and say "my man! "
👊🏻
Would the T9 not protect the blades from pitch buildup to some extent?
I’m not sure about that
"Check thyself before thee wreck thyself."
I wonder if an old toothbrush would work with that stuff cleaning the blade and getting between the teeth
oh yeah!
You could have used a toothbrush to help clean the blade teeth. Great video. 👊
Good idea
He’s not a doctor, but he plays one in real life!! And you had me at wet fart
👍🏻
I use navel jelly to clean followed by fluid film to protect and make a nice slick surface. Maybe I’ll give the T9 a try, lots of people using that
👊🏻
"it smells awful.....and it works!"
lol for sure
Wait. I’m supposed to clean my blades and bits???
Try using Awsome cleaner from the dollar store ! It is only $1.00 and melts away any and all pitch on a saw blade without any trouble. You will happy with the results and not have to pay a lot for it. Good for many other uses. Was rated #1 in Wood magazine issue and it works !
Thank you
I put the rust free on my saw and it turned my cast iron yellow. :(
For Rust Free to smell like that it must contain either phosphoric or hypo phosphoric acid so a vapour mask is highly recommended. Hypo phosphoric acid is a key ingredient in illicit drugs so please be incredibly careful when using it.
Just a quick follow up. I found the Material Safery Data Sheet for Rust Free online. The key ingredient is phosphoric acid. I hope the manufacturer included the MSDS information with the packaging and that you simply overlooked it. If not, please alert your fanbase to the facts so that no one is adversely affected. I know that you mean well and you wouldn't knowingly place anyone in harm's way, hence the reason for this message. I personally am a huge fan and only wish the very best for you.
Thank you
Place your saw blade in a old pie plate and use a old toothbrush.
👍🏻
Lapel mic your audio improvement
Mic wasn’t powered on. I didn’t realize it until I was done with the video. I almost deleted the whole video but decided to publish after some thought.
If you have a newish cast iron top with just a couple of spots on it DO NOT USE THIS PRODUCT. It will instantly patina your cast iron.
!;-)
👊🏻