Yes, good job! 👍 But I know that you are only showing this for students to know... I can see that your skill is good... Only that, the only issue is that this work would get a grade of "R" or repeat... Since the blot produced by the intermittent stroke of the pen... Surely, this will receive a grade of "R" or repeat if the student will follow this as is... Better to use T-square than your drafting machine... 👍 Anyway... You can also use another ruler or a ruler plus a triangle to avoid blots from the intermittent strokes of your pen... That is... If that is really a pen... 👌
Hello, sir can you please make video on drawing this Instructions: Answer ALL questions. In this assignment, question (a) below is a description of a system and (b) provides information about a graphical plain scale. Question (a) requires the construction of two views of the artifact described, while (b) require the construction of a plain scale conforming to the information given. Both the two views and the graphical plain scale are to be drawn in the same drawing area of an A3 drawing sheet, laid in landscape, appropriately centralized as taught in this module. Please note that part (b) requires some prior calculations, these calculations shall be done in the drawing area (i.e., defined only by the standard margins and title block as taught in this module) on the flip side of the A3 not used for the views and the plain scale.(ONLY neat presentations earn credit). [Do not dimension your drawings unless explicitly asked to do so!] [deduct 5 Marks if unsolicited dimensions are included]question 1 [100%](A). A cleaning company contracted by BIUST has commissioned you to design a special tool with which to remove sticky chewing gum on the floors of student hostels. The tool is to be called a SCRAPER and its overall shape is a rectangular solid of 120 × 80 × 10 mm. However, one end of rectangular solid rises from zero thickness to a maximum thickness of 10 mm in a length of 30 mm to form a sharp edge. The opposite end is semicircular. A 30 mm diameter hole is positioned such that the center of the hole is 40 mm from the semicircular end and 40 mm from either side of the tool. Use an A3-size paper to appropriately layout a full-size drawing of this concept as presented by the cleaning company. Your drawing should, in appropriate portions: 1). give, in 3rd angle projection, the front view (FV) and top view (TV) of the tool appropriately centralized with the title block assumed to be 12 mm high, in which only 2) the name of the tool, 3). Your Student ID should appear neatly written. [50%]B) At a convenient place above the scraper in (a) above, construct a plain graphical scale to depict the situation whereby a field of 7.2 square meter is represented in a map by 10 cm x 8 cm. The scale should show centremeters (cm) at the lowest level but long enough to measure up to 3 meters (m). Be advised that the height of the scale (or the height of the thin long rectangle) shall be 10mm instead of the recommended 3mm taught in the module. This height is very important especially for centralizing your views vertically [50%]
Another thing... If the rulers of your drafting machine is not tapered then even when you will follow my first two advices... Your drawing will still blot... 👌 And you will still get a grade of "R" or repeat... Some engineering students, men even, would literally cry just by the sight of 2 or 3 repeat grades... Some would literally even give up if the "Rs" would accumulate more... Because each plate takes a lot of time to do... 👌 You really need dedication and patience in engineering drawing... Patience is key... Not speed... Patience is key... 👌
🎉🎉..A lot of Thanks sir..❤❤❤
Ha..
Great work sir, this will always be helpful for the students who doesn't have a basic infrastructure
Amazing explaination 👏
Thanks a lots sir bahut hi nice explanation aapne kaam ki chij sikhaye
Great work sir, thank you
very informative video sir🙏🏼
Thank sir tomorrow my ED exam 😊👏
Thanks sir 🙏
Super sir
UCOE Drawing sheet reminded me old days
Yes, good job! 👍
But I know that you are only showing this for students to know... I can see that your skill is good... Only that, the only issue is that this work would get a grade of "R" or repeat... Since the blot produced by the intermittent stroke of the pen...
Surely, this will receive a grade of "R" or repeat if the student will follow this as is...
Better to use T-square than your drafting machine... 👍 Anyway... You can also use another ruler or a ruler plus a triangle to avoid blots from the intermittent strokes of your pen... That is... If that is really a pen...
👌
❤❤❤❤
Thank for you sir 🥰🥰
And oh! By the way... Lest I forget... You should use an "H" pencil first before using a pen...
👌
thank you sir
Hello, sir can you please make video on drawing this
Instructions: Answer ALL questions. In this assignment, question (a) below is a description of a system and (b) provides information about a graphical plain scale. Question (a) requires the construction of two views of the artifact described, while (b) require the construction of a plain scale conforming to the information given. Both the two views and the graphical plain scale are to be drawn in the same drawing area of an A3 drawing sheet, laid in landscape, appropriately centralized as taught in this module. Please note that part (b) requires some prior calculations, these calculations shall be done in the drawing area (i.e., defined only by the standard margins and title block as taught in this module) on the flip side of the A3 not used for the views and the plain scale.(ONLY neat presentations earn credit). [Do not dimension your drawings unless explicitly asked to do so!] [deduct 5 Marks if unsolicited dimensions are included]question 1 [100%](A). A cleaning company contracted by BIUST has commissioned you to design a special tool with which to remove sticky chewing gum on the floors of student hostels. The tool is to be called a SCRAPER and its overall shape is a rectangular solid of 120 × 80 × 10 mm. However, one end of rectangular solid rises from zero thickness to a maximum thickness of 10 mm in a length of 30 mm to form a sharp edge. The opposite end is semicircular. A 30 mm diameter hole is positioned such that the center of the hole is 40 mm from the semicircular end and 40 mm from either side of the tool. Use an A3-size paper to appropriately layout a full-size drawing of this concept as presented by the cleaning company. Your drawing should, in appropriate portions: 1). give, in 3rd angle projection, the front view (FV) and top view (TV) of the tool appropriately centralized with the title block assumed to be 12 mm high, in which only 2) the name of the tool, 3). Your Student ID should appear neatly written. [50%]B) At a convenient place above the scraper in (a) above, construct a plain graphical scale to depict the situation whereby a field of 7.2 square meter is represented in a map by 10 cm x 8 cm. The scale should show centremeters (cm) at the lowest level but long enough to measure up to 3 meters (m). Be advised that the height of the scale (or the height of the thin long rectangle) shall be 10mm instead of the recommended 3mm taught in the module. This height is very important especially for centralizing your views vertically [50%]
Thanx sir ❤️
Another thing... If the rulers of your drafting machine is not tapered then even when you will follow my first two advices... Your drawing will still blot... 👌 And you will still get a grade of "R" or repeat...
Some engineering students, men even, would literally cry just by the sight of 2 or 3 repeat grades...
Some would literally even give up if the "Rs" would accumulate more... Because each plate takes a lot of time to do... 👌
You really need dedication and patience in engineering drawing...
Patience is key... Not speed... Patience is key...
👌
As is... If this is followed... The student will get a grade of "R" or repeat... 👌
Sir new topic agian lecture universal coupling plz sir
Sir draw single stork vertical glothic lettering
Sachin Verma