We remodel chicken farm poutry houses for 14 years and that's how we use to frame for fans doors was fun and super dusty. We came out with a ton ideas how do it better everytime
After being a remodeling contractor for 40 years or so I have become really good at fixing the mistakes of the past plus my own mistakes. You can learn something new everyday and you say I thought I have seem everything a lot.
I really don't care if you do the same stuff over and over, still entertaining to watch. It's always new and sometimes you'll have a new technique or tip.
When you cut a bit high on that flush cut of the grade board if you come back with a disc grinder with a flapper wheel it will take the top off of that board in an instant. Great work boys!
I might overthink stuff but been a finish carpenter for 20yrs & when I install exterior doors with a threshold I fill the inside half under the threshold with a heavy duty liquid nail/pl to dry hard like a shim so the threshold don’t bounce & the outside half with a playable waterproof silicone to get best of both worlds..just my experience works best
I have watched your videos for many months now. I am impressed with your work dedication to perfection, not practiced much these days . Moisture is your worst enemy and after watching all the steps taken to stop it on the door installation I have one suggestion that I have tried. To stop moisture from wicking up the side frame boards , I have removed the aluminum threshold plate and primed and caulked the board ends. Reattach the threshold plate compressing the caulking out and wipe clean
Totally agree with getting it to, to let you know what to do next. Live and die by the concept of Do what know and the rest will follow. If that makes sense.
I just dumped all my Team Yellow from that vintage (18VDC NiCd). I bought new NiCd batteries for it about 18 months ago, and they lasted about 12 months before they failed. I could have gone the XRP Adapter, and said NO...I wasn't going to spend $50 for the adapter, then another $200 on batteries on nearly 20 year old tools. Went Team Red...$500 got me brushless drill, impact driver, light, circular saw, single hand sawzall, and a multi-tool. ALL brushless. It also came with a 6Ah Battery and a 3Ah battery with charger. VERY happy with that upgrade. :)
Seriously considering this myself, I'm using cheap adapters but the yellow batteries still die too damn often and when you test them it's usually just ONE cell killing the pack. Red is looking REALLY tempting dammit!
@@BLKMGK4I know people that went Team Yellow with the Li-Ion and are very happy. I opted for Team Red because many people I know moved to them and have been beyond happy. I do wish the batteries were a little less. Holy freaking wah. Kyle must have $10K in batteries in that trailer! LOL.
Through The Roof is some awesome stuff! We sale it in our store and it’s the go to every time when someone needs something. Matter of fact we use it to patch our waders that’s how good it is and even is that flexible.
I've learned so much from your videos. Even Ambition strikes people. QUESTION: Why install this door so far out and restrict the opening to 90 degrees? If you make a jamb extension you can get the full 180 degree opening. This install would benefit from it for sure but more work trimming it out.
When I do this I first check the concrete for level and will adjust the jamb height if the concrete is more than a 1/4” out of level. Using a 1/4”+ of grout allows me to get a perfect level threshold. Because if your sill isn’t perfect, then those will be reflected in your reveal/door closer/seals.
Your screw drilling technique is impeccable and satisfying. Confidently managing its trajectory but not driving it too far that ends with a satisfying brrt!
Kyle, First thank you for the content. I am a crane operator and safety coordinator for a company out of Ohio so if you ever have any questions feel free to ask. Also I started in roofing and our gable ends we always himed our first and last sheets down folding them over a side trim similar to how you locked in the bottom piece (just an idea if you want to try). Lastly have you ever worked with metal trusses on post frame buildings? I am trying to find details on insulating with metal trusses.
I like that you are very exact when doing work, it is inspiring but sometimes like when installing a door or windows you have to put the level away and just make it work and look good, Thanks for the video
Your videos have been such a great learning resource for me! I'm curious though, why install the door so far out and limit the opening to 90 degrees? Wouldn't extending the jamb for a full 180-degree opening be beneficial? It seems like it would require some extra trimming, but it could really enhance the functionality. Keep up the awesome work!!
Nice job. I wonder if the owner wants to move the control buttons for the overhead door inside, now that there's a man door for access. It would certainly improve security.
If that pre hung door was made with a full width jamb so the inside of the door was flush with the inside wall finish then the door could swing a full 180 degrees as it should.
Don't forget that 30 years ago cordless impact drivers and drills were nearly non-existent and or sucked. I'm sure running around with a corded driver wasn't all that fun, thus the higher usage of nails.
@mjboy8790 I do believe him nor I swing in that direction. However, I like his channel and personality. If I can help anyone grow that I like, it's the least I can do.
I’m about to renovate an old metal building that has all the siding horizontal. I noticed most if not all of your projects deal with the ribbing in the vertical and I already see the advantage for water drainage, fitting windows and doors, etc. But would you suggest I replace all the metal with vertical layout or is there a way to properly compensate with the less than ideal horizontal when sealing windows and doors. I’m new to this and really perplexed with the horizontal and already running into problems!
I'm just DIY at best so I really don't do this for employment but why no panel saws? a hand saw is cheap and easy for all these bits the power tools make harder to do, time.s money and all that. tidy work guys, nice to see.
why did you use such a narrow thickness door? now you can't open it past 90 degrees, maybe should of got a thicker one made for those 2x6 walls or added some wood to the face of the door jam... ran into the same problem today lol went back and got a door made for a 2x6 wall lol
On one hand, the roll formed sheet makes it different from usual installs, but there's no drywall, plaster, wood siding, stucco, etc, to complicate things. I just did a door in old construction where the entire framed wall was leaning over 1 inch. Worst I ever encountered, but it didn't really change how I install doors. I always show up with lots of shims. For thresholds, I bring aluminum to shim with. All my shims get glued. For shimming jams, I put them all in, make sure it's all plumb, true, level, then drop crazy glue on the shims so they don't move while I set fasteners, and trim off the excess shimming.
You put tape on the bottom of the door framing that touched the slab, but you didn't tape the block that you Tapcon'ed to the slab. Shouldn't you have also put a waterproof tape on that block as well?
The edge of the asphalt drive is now inside the door hearth so you have partial grass and partial ashphalt as you walk through. You should have lined up the right side of the door jamb with that grass/ashphalt edge border by moving the opening 4 inches left.
Normally I find Old Greg smoking hot….but that facial hair has GOTS ta go…STAT!!! 😂😂😂 He’s looking like an elementary school maintenance man and part time adult film star. 🤦🏽♂️🤦🏽♂️🤦🏽♂️
U twos were arguing! Now’s that is not nice! Greg u hv a hole in your boot? Whites Premium Perry Moc Toe ! That’s all I wear & I am in them 5/6 days a week as a finish carpenter!
yup. 30 years ago they would do a half azz job and get full pay for it. it's to bad they still try to do the same thing. and some times get away with it.
Yes agree, I like Kyle but Gregg could potentially be a better tradesman one day. And I’m pretty sure Kyle will never let that happen. I would absorb as much knowledge as possible and be gone! 👋
We remodel chicken farm poutry houses for 14 years and that's how we use to frame for fans doors was fun and super dusty. We came out with a ton ideas how do it better everytime
I loved the level of detail, instead of skipping over what may be obvious to a professional. Thanks, just what I needed.
After being a remodeling contractor for 40 years or so I have become really good at fixing the mistakes of the past plus my own mistakes. You can learn something new everyday and you say I thought I have seem everything a lot.
Florida GC in the chat, Excellent job running the rules of being a good contractor, True, Plumb, level and square! Five star.....
been waiting for this exact video for years guys, thank you thank you thank you x million!!!!
Kyle, you are just a nice guy and the god of project makes everything easy for you. Humble, honest, caring and professional.
I really don't care if you do the same stuff over and over, still entertaining to watch. It's always new and sometimes you'll have a new technique or tip.
I agree! It’s great to see the evolution of their building process over the years.
Thanks Kyle & Greg. 😁👍🏼
When you cut a bit high on that flush cut of the grade board if you come back with a disc grinder with a flapper wheel it will take the top off of that board in an instant. Great work boys!
I might overthink stuff but been a finish carpenter for 20yrs & when I install exterior doors with a threshold I fill the inside half under the threshold with a heavy duty liquid nail/pl to dry hard like a shim so the threshold don’t bounce & the outside half with a playable waterproof silicone to get best of both worlds..just my experience works best
I have watched your videos for many months now. I am impressed with your work dedication to perfection, not practiced much these days . Moisture is your worst enemy and after watching all the steps taken to stop it on the door installation I have one suggestion that I have tried. To stop moisture from wicking up the side frame boards , I have removed the aluminum threshold plate and primed and caulked the board ends. Reattach the threshold plate compressing the caulking out and wipe clean
Totally agree with getting it to, to let you know what to do next. Live and die by the concept of Do what know and the rest will follow. If that makes sense.
Can I just work with you guys for one day. I won’t take any pay. Such good craftsmanship and quality.
I just dumped all my Team Yellow from that vintage (18VDC NiCd). I bought new NiCd batteries for it about 18 months ago, and they lasted about 12 months before they failed. I could have gone the XRP Adapter, and said NO...I wasn't going to spend $50 for the adapter, then another $200 on batteries on nearly 20 year old tools. Went Team Red...$500 got me brushless drill, impact driver, light, circular saw, single hand sawzall, and a multi-tool. ALL brushless. It also came with a 6Ah Battery and a 3Ah battery with charger. VERY happy with that upgrade. :)
Seriously considering this myself, I'm using cheap adapters but the yellow batteries still die too damn often and when you test them it's usually just ONE cell killing the pack. Red is looking REALLY tempting dammit!
@@BLKMGK4I know people that went Team Yellow with the Li-Ion and are very happy. I opted for Team Red because many people I know moved to them and have been beyond happy. I do wish the batteries were a little less. Holy freaking wah. Kyle must have $10K in batteries in that trailer! LOL.
Through The Roof is some awesome stuff! We sale it in our store and it’s the go to every time when someone needs something. Matter of fact we use it to patch our waders that’s how good it is and even is that flexible.
I've learned so much from your videos. Even Ambition strikes people. QUESTION: Why install this door so far out and restrict the opening to 90 degrees? If you make a jamb extension you can get the full 180 degree opening. This install would benefit from it for sure but more work trimming it out.
Fantastic job gentlemen really liked the part about the j channel at the end too, your attention to detail is always on point. thank you so much!
When I do this I first check the concrete for level and will adjust the jamb height if the concrete is more than a 1/4” out of level. Using a 1/4”+ of grout allows me to get a perfect level threshold. Because if your sill isn’t perfect, then those will be reflected in your reveal/door closer/seals.
Your screw drilling technique is impeccable and satisfying. Confidently managing its trajectory but not driving it too far that ends with a satisfying brrt!
Love the rant at 7:13 with the voice change!😂 Great video AND entertaining!
It is so dang funny when you change his voice like that at 7:15...cracks me up every time ;-)
sounded a bit Minnesota accent, al la Jessie Ventura.
Your father in law is gonna love it nice work boys
Awesome video. Thank you for sharing the process with us.
Great to watch how the pros do it
Kyle is a funny guy at times 😂😂
Kyle, First thank you for the content. I am a crane operator and safety coordinator for a company out of Ohio so if you ever have any questions feel free to ask. Also I started in roofing and our gable ends we always himed our first and last sheets down folding them over a side trim similar to how you locked in the bottom piece (just an idea if you want to try). Lastly have you ever worked with metal trusses on post frame buildings? I am trying to find details on insulating with metal trusses.
I like that you are very exact when doing work, it is inspiring but sometimes like when installing a door or windows you have to put the level away and just make it work and look good, Thanks for the video
Crazy watching you cut metal while looking up at the cut on a windy day and NOT wearing eye-pro.
#osha snitch
Your videos are always helpful.
We love your channel!
Learn something(s) every video. Thank you
If not videoed and published on UA-cam, you would never know.
Good practices produce good results, even though it was a struggle to install.
About time you got some badger bags, jealous of the red cobra buckle. Great video
I managed to get a red buckle on my custom badgers that I’m still waiting on.
@@kickyourfaceandlaugh607quick question those are better than db ?
@@gabrieluribe7410 i mean they’re custom….. I haven’t tested badger yet.
Always impressive work.
I like how you reused all the good old steel, it looks great!
Nice one
I’ve used through the roof to fix my boots and used it in bathroom installs too
Back in the days before ready made shims, we made them. Really easy to do. 😁😁
A complex job done so well.
Your videos have been such a great learning resource for me! I'm curious though, why install the door so far out and limit the opening to 90 degrees? Wouldn't extending the jamb for a full 180-degree opening be beneficial? It seems like it would require some extra trimming, but it could really enhance the functionality. Keep up the awesome work!!
Kyle lookin like DBPD with all grey and black work belt
Nice job. I wonder if the owner wants to move the control buttons for the overhead door inside, now that there's a man door for access. It would certainly improve security.
If that pre hung door was made with a full width jamb so the inside of the door was flush with the inside wall finish then the door could swing a full 180 degrees as it should.
Don't forget that 30 years ago cordless impact drivers and drills were nearly non-existent and or sucked. I'm sure running around with a corded driver wasn't all that fun, thus the higher usage of nails.
Yes!
Great video!
Good afternoon
You’re work and company make such amazing products. So I was wondering if your company could would you ever work on the West Coast?
*** DON'T FORGET *** Please Like, Share and Subscribe if yall have not already
What are you his boyfriend?
@@mjboy8790 What are you? A twit?
@mjboy8790 I do believe him nor I swing in that direction. However, I like his channel and personality. If I can help anyone grow that I like, it's the least I can do.
thanks man
Good job
Awesome
Great job
In a Simpsons Episode you two would be Willie and Ned Flanders. 🤣🤣🤣
Greg: "You're ugly." 🤣😂🤣
Before battery tools we used more nails rather than drag cords!
👍
I’m about to renovate an old metal building that has all the siding horizontal. I noticed most if not all of your projects deal with the ribbing in the vertical and I already see the advantage for water drainage, fitting windows and doors, etc. But would you suggest I replace all the metal with vertical layout or is there a way to properly compensate with the less than ideal horizontal when sealing windows and doors. I’m new to this and really perplexed with the horizontal and already running into problems!
I'm just DIY at best so I really don't do this for employment but why no panel saws? a hand saw is cheap and easy for all these bits the power tools make harder to do, time.s money and all that. tidy work guys, nice to see.
Man I wish you where in Texas!!
I just hope Greg gets paid really good money.
It was a good day , I only counted 8 scam calls today !
Was really hoping you were going to add in some extra concrete to line up with the door.
why did you use such a narrow thickness door? now you can't open it past 90 degrees, maybe should of got a thicker one made for those 2x6 walls or added some wood to the face of the door jam... ran into the same problem today lol went back and got a door made for a 2x6 wall lol
You missed the concrete in the front
You actually pay your helper? He doesn’t do anything. You did all the work. 😂
You Built. That pole bran
no tape under the door covering the freshly cut wood?
Hey what is that stuff on Greg’s top lip? 🤣🤣lol
One point from my end: why didn't you use the Multi-Tool to cut the nails from the inside?
On one hand, the roll formed sheet makes it different from usual installs, but there's no drywall, plaster, wood siding, stucco, etc, to complicate things.
I just did a door in old construction where the entire framed wall was leaning over 1 inch. Worst I ever encountered, but it didn't really change how I install doors. I always show up with lots of shims. For thresholds, I bring aluminum to shim with. All my shims get glued. For shimming jams, I put them all in, make sure it's all plumb, true, level, then drop crazy glue on the shims so they don't move while I set fasteners, and trim off the excess shimming.
You put tape on the bottom of the door framing that touched the slab, but you didn't tape the block that you Tapcon'ed to the slab. Shouldn't you have also put a waterproof tape on that block as well?
Little rough on Greg today. Nothing he said you agreed with. Made it seem like it was his first day.
"Good luck, its not gonna be as fun"
Or translated means
"That sounds like a YOU fkin problem bud. Enjoy"
Do they make a door with a 8.25” jamb? Seems the 3.5” door jamb allows the door to hit the framing and spring the hinge.
Would you drive a mile, so see Kyle smile? 🧐
Kyle, I noticed you always use your Metabo impact driver lately instead of your Milwaukee, what is the main reason you like the Metabo more?
What pencil are you using?
Your missing a screw on the left-hand side of the door, where the trim is
Hi Kyle how are you getting on with the badger nail bags??
😃👍🏼🚪👊🏼
The edge of the asphalt drive is now inside the door hearth so you have partial grass and partial ashphalt as you walk through. You should have lined up the right side of the door jamb with that grass/ashphalt edge border by moving the opening 4 inches left.
There was a post in the way
So all the ‘bad’ workmanship from 30 years ago actually lasted quite well then?
Where was this video 6 months ago??? Grrrr lol
Question.... do you build from kits?
Oh come on with that mustache. You gotta be trolling us.
A screw wouldn’t make more sense thirty years ago.
Yooo, where do you fish get your workwear from? ✌️
what brand is that door?
Normally I find Old Greg smoking hot….but that facial hair has GOTS ta go…STAT!!! 😂😂😂 He’s looking like an elementary school maintenance man and part time adult film star. 🤦🏽♂️🤦🏽♂️🤦🏽♂️
U twos were arguing! Now’s that is not nice! Greg u hv a hole in your boot? Whites Premium Perry Moc Toe ! That’s all I wear & I am in them 5/6 days a week as a finish carpenter!
LET GREG TALK
needs concrete now
Free Julian Assange !
yup. 30 years ago they would do a half azz job and get full pay for it. it's to bad they still try to do the same thing. and some times get away with it.
King dm samme
Whats up!
First!
Do you ever let Greg actually do his own work or just micromanage every thing he does?.
Yes agree, I like Kyle but Gregg could potentially be a better tradesman one day. And I’m pretty sure Kyle will never let that happen. I would absorb as much knowledge as possible and be gone! 👋
😂😂😂😂😂
It's probably just for the camera. "teaching" as he does stuff. Even though Greg probably knows.. may be just for the viewers.
Is this how not to install a door? sorry but you guys are goofballs sometimes
Why does anybody need a house that big
18:00 That is not a Sawzall. That is a recip saw. Only Milwaukee makes the Sawzall.
Whatever ...