Mr. Clinton. These last two month's have kicked my ass. Been through a helluva lot of bad. You and Kevin made me laugh hard. And I just wanted to thank you guys. I truly needed that
The three of you are the dynamic trio. Mason may be quiet, but if he keeps hanging around you two he'll be hamming it up for the camera in no time. Great video.
I don't know about national television, but you are broadcast through Dish Tv. Back the late 60's drove logging truck in Sierra Nevada mountains, One day watched a D9 roll end over end down the mountain and windup sitting upside down on the road. Operator climbs out dust himself off and retrieved his lunch box and sit on a stump and just stare at the aftermath. He wasn't injured, just shookup a little.
G'day Clint & team. That's correct International not national TV. My mates and I call people who do things the cowboy way THE Dodgy BROTHERS. THANKS FOR THE FUN FELLOWS.
Awe that blade being attached at the bottom is way overrated Clinton…, just rinse that oil off the under side of the cab roof, and send her back out for work… Hahaha…! I am continually amazed at what these guys do to these dozers…, and nobody killed.. Great video, Thank you sir.
Is there no end to your skills Clint - that lovely little bracket in very awkward position better welded than a lot of guys who do nothing else! I can remember the first gear pump I had anything to do with - one on the machine wouldn't do a thing admitted 1 and half thou feeler through the gear - local fitter had secondhand job on his shelf that gripped the same feeler - ran the machine perfectly. Moral of story - make sure the thing is full of CLEAN oil! Good content - love the banter.
Clint, 16 years ago I rolled a Bobcat skid-steer 5 revolutions down an embankment and drove away by the grace of God. She’s still running today same engine over 8k hours rebuilt injection pump, new injectors, water pump and radiator. We named it Humpty Dumpty after that.
Mason is a great hand. Hope he stays around for a long while. Nice to have young blood around. Learn, learn, learn and learn. I know that Tucker and Hunter are there too.
Those loggers are really something else but hey they keep you busy and we get to see quality video’s. Good to see Mason on the tools he sure has good teachers to learn his trade. Thanks for sharing.
Just go to this video today and my though was to intentionally reverse the hydraulic lines on one angle cylinder so that both cylinders could be used to pull the blade onto the ball while using the Taylor to lift only.
👍 Really enjoy watching you boys tear down and rebuild. At 58:51, it is never a good idea to start a piece of equipment without an operator in the seat and at the controls.
Friend on a new 850JD dozer - night on a wild fire run, Cal. mountains. 45' downhill for about a 1/2 mile on an old mining road. Too narrow for the dozer. should have parked it until daylight. DOA. Took them a year to get it out. I have a 550G, while pushing a huge brush pile, dropped into a mineshaft with trees growing out of it, no one knew it was there. Just some hoses broke. Pretty common around here, old gold mines. The brushpile made a nice plug for the hole about 30 feet down. Best damn tractor ever made. 15,000 hours+
It's like when you see and advert that says, running when parked, only in this case it was parked halfway down a mountain. 😂🤣 Mason is coming along nicely, fortunately he's fitted in with your and Kevin's work ethic and more importantly humour. 👍
I remember my time at JD dealer back in 70s and a rolled over 450 came in for roll cage and blade repair. Laid on it's top for a couple days and when the logging crew rolled it back to operating position - put it back to work until they realized lots if the fluids had drained out and things were whining and grinding now. Funny how the used parts trailer had some stuff that saved their bacon too. Good video and save for them. Like you said "they'll be back" usually for some other goofus move. My boss used to call it guaranteed income. 😄 I had a job like Mason's to start with - it helped throughout my various carriers in heavy equipment and automotive. He's a lucky young man to be around such a skilled crew, course he's a great addition for you as well.
Clint, ther's a right way, there's a wrong way, there's C&C way and there's a 10 cent way! Put a band aid on it and send it on the way.. the lines with the zip ties were wrong way.
Clint, have you ever watched Kurtis at CEE (cutting edge engineering) down under in Australia? He's always building and repairing those kind of parts. Great UA-cam channel.
I'm an American from outside Detroit but living in the Philippines for 12 years and watch your video's all the time!! You guys have a big working condition that teach also and have some fun also!!! GREAT JOB!!!
I would like to take this opportunity to thank you Clinton and Kevin and Randy as well, for doing such a stellar job of on the job training for young Mason. He has now mastered sunglasses balanced on his ball cap and sporting C&C equipment fingers as well! Thanks to all of you guys, Mason is going to make it.
Kevin got a kick out of giving you the old junk bolts on the flip over special, I had a good laugh with you guys. On another note, Mason is going to be extremely valuable if he continues on the path that is before him. Great video, i enjoy watching the repairs and seeing the knowledge that you guys have. Thanks again for sharing.
Sometimes accumulators are added to smooth out the hydraulic pulses in the system to prolong part life. Also, they sometimes add accumulators to grapple hydraulics to maintain the pressure when the grapple is clamped on logs while skidding.
How's it going team at C&C Equipment? Hope all is well with everyone. Have a great week team and Mrs. C. Is Hunter taking all the girls out in his awesome truck? 😁🤣😂❤️💜
There is a couple D7F's going up for auction at the Chambersburg location on the 4th with your name on it. There are slim picking on generators this month.
Lol at the "other channel".... ( C&C "Un-Equipment) 😁😁You guys had a bit of a ride with those dozers today! Just never know what the loggers are gonna provide next!
It's very entertainment to watch you Sir, beacuse of your knowledge about everything in our daily world! Welcome to us in Sweden would have you as our guest, Sir! From Peter Eriksson Sweden Europe 😅😅😅!
☘️🇺🇸🇮🇪morning gents hope y’all r well- (shakes my head) do those logger fellas think they’re immortal or just pea soup dense not paying attention. Love watching ur magick fixing &”making it work”.. blessings gents Ty for teaching & sharing
When he put the hydraulic hoses back together the zip ties were not on the same side were they right?
Lol
We did that for a trick and your the only one that caught it so far!!!
I believe that was a joke for the watchful eye. LOL 😂 ❤
Nice work.
For hose clamps yes for zip ties it depends on Pressure he's dealing with. I don't know what's up with the zip ties😢😢
@@C_CEQUIPMENT
Saw it ! - thought you Guys were mental challenged !😆
You welded the whole thing and did not cover the cylinders now the cylinders could leak. Still HAVE A GREAT DAY.
I come from a logging family and loggers have some large cajones
I see the local logging industry is giving you job security along with some headaches. You guys do great work.
Mr. Clinton. These last two month's have kicked my ass. Been through a helluva lot of bad. You and Kevin made me laugh hard. And I just wanted to thank you guys. I truly needed that
Well hopefully all goes well
@@C_CEQUIPMENT It will take time. Thanls
Get. We’ll soon mate, best wishes from Australia
International audience. Watching from Ontario Canada
The three of you are the dynamic trio. Mason may be quiet, but if he keeps hanging around you two he'll be hamming it up for the camera in no time. Great video.
If you are worldwide that makes it international television. 😁
I smashed my fingers three times just watching this. lol Good work you do. You all know your stuff. Fun to watch skill workers.
I don't know about national television, but you are broadcast through Dish Tv. Back the late 60's drove logging truck in Sierra Nevada mountains, One day watched a D9 roll end over end down the mountain and windup sitting upside down on the road. Operator climbs out dust himself off and retrieved his lunch box and sit on a stump and just stare at the aftermath. He wasn't injured, just shookup a little.
This episode was very funny. Real issues create some of the best entertainment……
It’s great to see a kid who wants to work on heavies. Round here, they just tart with their cars making the loud and low
That dozer is ready to ROLL again there Bub, I mean CLINTON sir!
The Clint and Kevin show special guess Mason watch out Mrs. is coming
Got my Coffee, Dirt Perfect says hi!
Many hands make light work !!!
Some jobs need a guy at every angle to get the job done !!
That's a recommendation for the quality of that ROPS, to show no visible sign.
Clint congratulations on 120k the channel is doing awesome. Couldn't happen to a nicer bunch of people.
A roll over with your seat belt on is one thing...and a roll over with OUT your seat belt on is a whole different animal. Blue Sky's.
*THANK YOU FOR THE LONGER VIDEO!!!* 🥰
G'day Clint & team. That's correct International not national TV. My mates and I call people who do things the cowboy way THE Dodgy BROTHERS. THANKS FOR THE FUN FELLOWS.
If u push with the forklift and move the tilt valve without the dozer running it'll let the pressure our of the cylinders and the blade will move back
LOL!!! At 58:45... "oh, she's tight" HARD CUT! AND we're back....
Awe that blade being attached at the bottom is way overrated Clinton…, just rinse that oil off the under side of the cab roof, and send her back out for work… Hahaha…! I am continually amazed at what these guys do to these dozers…, and nobody killed..
Great video,
Thank you sir.
more fun every time... I can bring that last box of markers back but I need 2.
Is there no end to your skills Clint - that lovely little bracket in very awkward position better welded than a lot of guys who do nothing else! I can remember the first gear pump I had anything to do with - one on the machine wouldn't do a thing admitted 1 and half thou feeler through the gear - local fitter had secondhand job on his shelf that gripped the same feeler - ran the machine perfectly. Moral of story - make sure the thing is full of CLEAN oil! Good content - love the banter.
Great Job Gents !!!
Absolutely worldwide watched you in Africa, Amsterdam, and Paris international stars!lol
That’s awesome
Take 37 okay now we got it!!! At least you film real issues when fixing stuff.
Hey guys you are comming in loud and clear her on Vancouver Island. Cable is great. Good stuff
Fascinating! 👍
It's International Television! You're now a Global sensation 😁
Clint, 16 years ago I rolled a Bobcat skid-steer 5 revolutions down an embankment and drove away by the grace of God. She’s still running today same engine over 8k hours rebuilt injection pump, new injectors, water pump and radiator. We named it Humpty Dumpty after that.
Clint, I believe you and Kevin must start drinking early on Friday 😂 best video yet!!
You are definitely "international", I know nothing about excavators but just really enjoy your channel
Mason is a great hand. Hope he stays around for a long while. Nice to have young blood around. Learn, learn, learn and learn. I know that Tucker and Hunter are there too.
I wonder if those loggers will look at that repair as a challenge! IE hold my beer!
This is what Gold Rush would call a “bush” fix lol
You and Kaven have way to much fun when y'all are working. Keep it up I just love it.
I'd say you were international viewing. Regards from Scotland.
That pivot is better than new and will out last the rest of the machine. I don't call that shade tree.
Those loggers are really something else but hey they keep you busy and we get to see quality video’s. Good to see Mason on the tools he sure has good teachers to learn his trade. Thanks for sharing.
I think mason and Randy both need a raise!
The way that logging outfit goes through equipment, there has to be huge profits in logs!
New channel “ Mr Kevin’s Neighborhood “ Doing a a great job Clinton, especially like when you have the boys working with you!
Call it the shady way of sausage fingers😂😂😂😂
Just go to this video today and my though was to intentionally reverse the hydraulic lines on one angle cylinder so that both cylinders could be used to pull the blade onto the ball while using the Taylor to lift only.
👍 Really enjoy watching you boys tear down and rebuild. At 58:51, it is never a good idea to start a piece of equipment without an operator in the seat and at the controls.
I am from Ohio but live in the Philippines now and I watch you from here.
That’s cool
Friend on a new 850JD dozer - night on a wild fire run, Cal. mountains. 45' downhill for about a 1/2 mile on an old mining road. Too narrow for the dozer. should have parked it until daylight. DOA. Took them a year to get it out. I have a 550G, while pushing a huge brush pile, dropped into a mineshaft with trees growing out of it, no one knew it was there. Just some hoses broke. Pretty common around here, old gold mines. The brushpile made a nice plug for the hole about 30 feet down. Best damn tractor ever made. 15,000 hours+
It's like when you see and advert that says, running when parked, only in this case it was parked halfway down a mountain. 😂🤣 Mason is coming along nicely, fortunately he's fitted in with your and Kevin's work ethic and more importantly humour. 👍
Bet you had to have Randy pressure wash the seat off of that dozer that rolled down the hill... 🤣
Great team work. Always good to laugh at an awful job. Keep doing great videos!
Unbelievable those loggers really need the the second channel how to repair a rolled dozer great video thanks Clint and the guys
I remember my time at JD dealer back in 70s and a rolled over 450 came in for roll cage and blade repair. Laid on it's top for a couple days and when the logging crew rolled it back to operating position - put it back to work until they realized lots if the fluids had drained out and things were whining and grinding now. Funny how the used parts trailer had some stuff that saved their bacon too. Good video and save for them. Like you said "they'll be back" usually for some other goofus move. My boss used to call it guaranteed income. 😄 I had a job like Mason's to start with - it helped throughout my various carriers in heavy equipment and automotive. He's a lucky young man to be around such a skilled crew, course he's a great addition for you as well.
Hello c&x equipment it's is randy and I like your video and is cool 😎 thanks friends randy
Yeah that was interesting. You don't see this kind of stuff everyday. Good stuff guys. 👍👍🙂🇨🇦
great job lads
Clint, ther's a right way, there's a wrong way, there's C&C way and there's a 10 cent way! Put a band aid on it and send it on the way..
the lines with the zip ties were wrong way.
Clint, have you ever watched Kurtis at CEE (cutting edge engineering) down under in Australia? He's always building and repairing those kind of parts. Great UA-cam channel.
The comical entertainment and knowledge sharing of this channel is just level!!!! Thank you.
Not made a comment for a while, doesn`t mean that I`m not here , I`m still watching and enjoying.👍👍👍👍
Those nitrogen cans are usually shock absorbers for the hydraulic system. Not saying that's what the one you pointed out is, but most are.
You sure are world wide Watching from New Zealand
I am not surprised at a lack of a parts breakdown; the world has moved on from rebuilding components to just replacing components.
Great content from C& C Equipment- from your Calif. viewer since 2020 - Mrs. C has too squeeze Clint for info. but she stay’s focused - Thanks 👍😁🙏
Absolutely enjoyable video. Thanks for sharing Clint.
Enjoy the video on the JD Dozer Repairs .
Watching other people work shouldn't be that satisfying! Conversation is entertaining !
Tweaking Tuesday!! lol ,, I'm ready! Here we go!! Cheers!;-)!!
Love the dozer repair vids.
Good 👍🏻 job
Try the C&C drinking game! Everytime Kevin says "Bub"... take a swig! LOL... I can't see... you two are the pair!
Bonjour encore une vidéo agréable a regarder et de voir la complicité du team Bonne Journée --- Alain
Thanks
I'm an American from outside Detroit but living in the Philippines for 12 years and watch your video's all the time!! You guys have a big working condition that teach also and have some fun also!!! GREAT JOB!!!
Thanks so much!!
I would like to take this opportunity to thank you Clinton and Kevin and Randy as well, for doing such a stellar job of on the job training for young Mason. He has now mastered sunglasses balanced on his ball cap and sporting C&C equipment fingers as well! Thanks to all of you guys, Mason is going to make it.
Good tip about tapping bad 3/4” threads up to 20 mm.
You could have just reversed the angle hoses and then could the blade bottom in and out anywhere you wanted
great video,working with Kevin must make the day go by fast,at least it makes the day enjoyable 👏👏👏👏👏👌👌👌👌👌👍👍👍👍👍
Always great stuff. Kevin does need to be water lanced for the horn, ah hell, just because!
The hoses are switched!
Kevin got a kick out of giving you the old junk bolts on the flip over special, I had a good laugh with you guys. On another note, Mason is going to be extremely valuable if he continues on the path that is before him. Great video, i enjoy watching the repairs and seeing the knowledge that you guys have. Thanks again for sharing.
Shut the dozer off and use the forklift to push, wile working the angle control valve.
My loggers did not disappoint this time. I have such a beautiful vision of a dozer tumbling majestically down a ravine.
Lol
wow just so much fixin i guess id be the one to say it thank ya loggers for all the business LOL
Should weld the holes solid then re-drill and tap.
Mike Rowe says Safety 3rd. And I like his explanation.
Sometimes accumulators are added to smooth out the hydraulic pulses in the system to prolong part life. Also, they sometimes add accumulators to grapple hydraulics to maintain the pressure when the grapple is clamped on logs while skidding.
Friggin’ loggers - amirite? It was great meeting your crew at the Expo.
You also!
How's it going team at C&C Equipment? Hope all is well with everyone. Have a great week team and Mrs. C. Is Hunter taking all the girls out in his awesome truck? 😁🤣😂❤️💜
There is a couple D7F's going up for auction at the Chambersburg location on the 4th with your name on it. There are slim picking on generators this month.
Attach a chain from the track to the blade and then angle the blade!
I was thinking just a big wratchet takedown strap.
Drastic times call for Drastic measures!
This channel never fails to make me laugh. Highly skilled Master Mechanics / part time comedians. thx
I watch this from little England in GREAT BRITAIN ,, BRILLIANT Work lad’s,,
Thanks for the air in the dip stick hole tip. That was gold. The clint and Kevin show is fun as usual. Carry on.
My 550g can sit for a month and when I pull the dipstick I still get air pressure in it. 15,000 hours, Amazing machine.
Lol at the "other channel".... ( C&C "Un-Equipment) 😁😁You guys had a bit of a ride with those dozers today! Just never know what the loggers are gonna provide next!
Another Good One....Thank You.....
It's very entertainment to watch you Sir, beacuse of your knowledge about everything in our daily world! Welcome to us in Sweden would have you as our guest, Sir! From Peter Eriksson Sweden Europe 😅😅😅!
☘️🇺🇸🇮🇪morning gents hope y’all r well- (shakes my head) do those logger fellas think they’re immortal or just pea soup dense not paying attention. Love watching ur magick fixing &”making it work”.. blessings gents Ty for teaching & sharing
It will be interesting to see what breaks next on these dozers.