ASMR How to remove crackles from a badly used vinyl with WD-40? 如何除去舊唱片的【炒豆聲】? www.recordmuseum.hk
Вставка
- Опубліковано 30 бер 2016
- How to remove crackles and static electricity on BADLY used vinyls?
First clean up the vinyl with detergent and dry up with towel, then apply WD-40 to the vinyl surface with a high density cleaning cloth(or cotton cloth), it can act as a lubricant to eliminate 50 to 90% of the crackles and recover the shiny look of the vinyl! It works for all kinds of vinyls including Acetate master disc and Grampphone and its absolutely safe.
www.recordmuseum.hk
如何消除舊唱片的【炒豆聲】？
先用洗潔精清洗乾淨舊唱片及用毛巾抹乾，再用高密度毛巾均勻的塗上WD-40即能消除50-90%【炒豆聲】！WD-40可以用作唱片潤滑劑和保護劑能令舊唱片回復光澤。任何唱片包括金屬母盤及留聲機唱片都適用而且絕對安全。
How to remove static noise from vinyl:
• ASMR How to remove sta...
2017 Opening presentation at the Hong Kong Academy for Performing Arts:
• Sam the Record Man mus...
The TRUTH of Vinyl:
Episode 1
• The TRUTH of Vinyl 黑膠的...
Episode 2
• AMSR The Truth of Viny...
A man with the guts to wear a yellow suit, yellow shirt and blue tie deserves respect!
Thank you 😂
Michael Portillo approves! 😉
@@darania1 wait till its pink color suit and red tie. !!!
😂😂😂
Minion
Will WD40 remove squeaks and squeals from side B of Plastic Ono Band Live in Toronto 1969??
Removing the horrible sound of Yoko Ono from a record is even harder to do...
If you drink some gallons of it..? Maybe ;)))
Yes, if you rub it on with a brick for approx. 90 seconds
No Mike, you'll need WMD's for that task.
@@paulhooson6850 You just need lighter fluid and a match.
FINALLY something reasonable, simple and effective. No power cleaners, no expensive nonsense. TWO THINGS we already probably have around the house, boom, done. Let's stop acting like these records are going to break if we don't wear rubber gloves and use fancy tools on them. Beautiful, thank you.
Well said Mykee!
WARNING!!!!! NEVER DO THIS, IF YOU LOVE YOUR RECORDS!!!!!
WD-40 is a popular multi-purpose lubricant and penetrating oil used for various applications. However, it's important to note that WD-40 is not specifically designed for use on PVC (polyvinyl chloride) or vinyl materials. While WD-40 can be used to lubricate and protect some types of metal surfaces, it may not have the same beneficial effects on PVC or vinyl.
In fact, using WD-40 on PVC or vinyl can potentially cause damage or staining. WD-40 is an oil-based lubricant, and applying it to PVC or vinyl may cause the material to become discolored, greasy, or deteriorate over time.
If you need to clean or maintain PVC or vinyl surfaces, it's best to use products that are specifically designed for these materials. There are numerous cleaners, conditioners, and protectants available that are safe and effective for use on PVC and vinyl surfaces without causing damage.
Always follow the manufacturer's recommendations for cleaning and maintaining PVC and vinyl to ensure the longevity and appearance of the material.
You make a good point on your comment but I think a middle ground is a good compramise. WD40 is a lubricant and it’s chemical reaction to vinyl pvc is unknown exactly. There are so many different formulas for creating a vinyl record that each manufacturer has several formulas (there could be a couple hundred different types of vinyl pvc). Therefore it’s difficult to say exactly how WD40 reacts with the record. You should by no means spend a fortune for cleaning records or get caught up in extravagant gear. But a little research and exactly what works for u best is important. Plus if I’m spending for example 50 dollars on a record, I want to keep it forever and maintain it the best I can. It’s a complicated topic but I would advise against using wd40. It’s a great product but I wouldn’t say for cleaning records. Plus, it will get on your needle as well and who knows how that will impact the playback of your collection
@@ZeppstermeisterI'm with you on this. 👍 Also that microfilm layer from now will work as a magnet to absorb all the small dust particles. Not going to be able to just brush it off. Also I can see that I'll end up on the label. Absolutely bad advice to use WD 40.
There are cheap machines, DIY methods, and cleaning fluids that I would recommend. (Probably not something like the spin clean.) And definitely not wood glue. And no tap water, or spindex.
Someone broke into my house and stole my favorite suit, Linda Ronstadt record and WD40...wait...
Deleted scene from "The Mask"
ha ha ha!
Hahahaha
No. I think it was in there.
AHAHAHAHAAHAHAHAHAHAAHAHAHAH
LMFAO CLASSIC COMMENT
wow, a lot of skepticism bordering on hate and A LOT of "don't this ...don't do that...It will ruin this...it will ruin that...don't waste water...don't wear a yellow jacket" advice. It's obvious that James' cleaning method worked. Vinyl records are A LOT tougher than one would think. JAMES TANG: Thank you for this video and your successful presentation.
Dumb ass, it aint just about the record
I can still hear crackle
It didn't work as well as a proper clean with distilled or Deionized water, a proper solution including a surficant, an ultrasonic cleaner and a vaccum to remove/dry the vinyl followed by a anti static gun like zero milty.
@Jos Druiventros The point is there are methods to all but eliminate surface noise a lot of which are not shown in the video. I want the benefits of hi quality audio without artifacts that were not present in the original studio master. Why is there an issue with educating those on the same mission who may not know of Ultrasonic cleaning?
Here is such an example of Ultrasonic cleaning.
Before - picosong.com/wL7Rp/
After - picosong.com/wL7yg/
@Jos Druiventros The point is there are methods to all but eliminate surface noise a lot of which are not shown in the video. I want the benefits of hi quality audio without artifacts that were not present in the original studio master. Why is there an issue with educating those on the same mission who may not know of Ultrasonic cleaning?
Here is such an example of Ultrasonic cleaning.
Before - picosong.com/wL7Rp/
After - picosong.com/wL7yg/
@Jos Druiventros The point is there are methods to all but eliminate surface noise a lot of which are not shown in the video. I want the benefits of hi quality audio without artifacts that were not present in the original studio master. Why is there an issue with educating those on the same mission who may not know of Ultrasonic cleaning?
Here is such an example of Ultrasonic cleaning.
Before - picosong.com/wL7Rp/
After - picosong.com/wL7yg/
Well James, they say “you learn something new every day”, the voices and mid tones were defiantly clearer & sharper. How did you learn of this tip? I used WD40 on scalextric set and after a few laps the cars stopped sliding off, they had more grip! ( nothing to do with records) great tutorial video thank you.
James Tang, that was a great lecture. I learned lots of neat stuff. Your results were spectacular!
Yeah but what does wd40 do to the needle?!
oil and wear etc.
Every second-hand record dealer just went out and bought a can of WD-40.
Hello James Tang, what is the title of that song that you put in the background of Linda Ronstardt before cleaning the record?
Tried this on a Doors original which had been played to death back in the day on my old Dansette Monarch. It was so crackly that I wouldn't play it on my new turntable. Heavens - I don't believe the difference. Sound is unbelievable now, better than it was 53 years ago. Just cancelled my order for a Spinmaster cleaner. Thanks James.
Thank you to be a successful vinyl saver , you deserve high quality sound !
So you don’t get wd40 funk on your stylus needle ?
hi there . will the crackles come back or are they gone forever ?
@@stevehobday5571 the crackles will slowly come back but the record quality will be good for quite a while, the crackles are caused by dust and dirt (and static and electricity) so it will only temporarily get rid of the crackles.
@@BlackPatti78s I just transfer them immediately to casette tape so I have the best quality always. jk
This advice has fixed so many of my brand new records that would have skips but no scratches, or crackling sounds. Thank You!! One of the most helpful videos on vinyl record fixes
Thank you so much for your comments,happy listening.
Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
@@Zeppstermeister Shut up you spammer.
Thank you for the funniest record cleaning video on the Internet. It's great seeing vinyl NOT handled like the crown jewels. I've found a new use for WD-40.
I feel like it's a new age misconception now that vinyl is having its big resurgence that it's a super fragile medium and needs to be handled with extreme care at all times so as to not catastrophically destroy it, whereas they don't realize that vinyl records were the literal standard format for listening to audio recordings for *decades* and were used and abused like normal household items with no issues, there's still plenty of decades old records that were played daily for years that still play mint with proper care, and all of that doesnt even mention vinyl DJ's. Just because something is sorta fragile relative to the standards we have today doesn't mean you automatically therefore need to handle it as if it were the hope diamond, and I feel like that's lost on people today who never actually saw vinyl records being widely used as just *normal things* instead of as a commodity
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
WARNING!!!!! NEVER DO THIS, IF YOU LOVE YOUR RECORDS!!!!!
WD-40 is a popular multi-purpose lubricant and penetrating oil used for various applications. However, it's important to note that WD-40 is not specifically designed for use on PVC (polyvinyl chloride) or vinyl materials. While WD-40 can be used to lubricate and protect some types of metal surfaces, it may not have the same beneficial effects on PVC or vinyl.
In fact, using WD-40 on PVC or vinyl can potentially cause damage or staining. WD-40 is an oil-based lubricant, and applying it to PVC or vinyl may cause the material to become discolored, greasy, or deteriorate over time.
If you need to clean or maintain PVC or vinyl surfaces, it's best to use products that are specifically designed for these materials. There are numerous cleaners, conditioners, and protectants available that are safe and effective for use on PVC and vinyl surfaces without causing damage.
Always follow the manufacturer's recommendations for cleaning and maintaining PVC and vinyl to ensure the longevity and appearance of the material.@@JayK20
@@Zeppstermeister Shut up you spammer.
thanks James, cool idea ive never seen before. does the wd40 attract dust and if you were to remove the wd40 residue after would the noise come right back?
First of all once you apply WD40 ,it will last for a year !And it won't attract dust at all cos after playback you put it back to the sleeve, and you can easily use a high density cleaning cloth remove the wd40 with distill water.
Does he intend to sell this vinyl on Ebay?
Why do so many worry about " the stylus might get dirty", "there is residue from the WD40", if you are that fastidious then you would be cleannig both the record and your stylus after every play, how many ordinary people do that? It's a vinyl record, possibly played countless times throughout the years on various decks of dubious quality, has survived the ages and is still collected and sought after. If you want perfection then you will always be disappointed, if you want a near amazing recording then go for a digital copy. Personally, I love listening to old blues music, recorded with all the imperfections imaginable, making it a real experience of the time. Thank you so much for posting this Mr Tang, it has enhanced many of my old abused records and made them sound amazing, much respect to you.
There are ways to quickly clean your stylus it’s not as difficult as it sounds (or time consuming). It’s more about how the wd40 reacts to the pvc. It leaves a residue behind and is intended to be a lubricator and or rust remover/preventor not a cleaner. Plus, there so many different formulas for vinyl pvc from each manufacturer, which means there could definitely be a couple hundred variations to stamping out a vinyl record. It’s not certain how wd40 reacts to one type of vinyl let alone 100 variants. With so many cleaning specific products I think a little bit of research and care goes a long way if I’m spending as much as I am for record prices nowadays.
@@Laura_r53Not just that. There will be a mixture of WD 40 and dust in the grooves from now. Try to dust it with a carbon fibre brush from now. No chance of that. Use that brush on other records. That's a brilliant way to contaminate the next record. 🤣😂
This video had me sitting with my mouth wide open at the conclusion. So simple and yet effective. I always tell my sons that WD40 is a miracle chemical and this just proves my point!! Well done.
Thank you for spreading the positive energy, rescuing and enhancing sound quality of vinyls!
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
@@Zeppstermeister Shut up you spammer.
The sound outside of my turntable pioneer PL 300 ripples up and down what is worng?
what a good video but i have one question if we apply the dw40 on the vinyl that does not damage the needle?
NEVER!
hey Mr. Tang, thank you for the method. I am washing them very much like you, but at the end I use alcohol, (Isopropil works at best, I hear). I do have a question, still..
Is it not dangerous for the integrity and live of the needle to use wd40? I mean, it drys and it gets very adhesive during time. Another fact is that the slightly oil film will degrade and strongly leave a persistent smell on your LP sleeves and with the time, your whole precious collection will smell like a Auto-Service Workshop. How do you handle it? i mean, the needle and the wd40 smell? With respect,
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
I just put on my tux and now I am ready to clean at the sink.
🤣🤣🤣🤣
This actually works! I washed the record again after the wd-40 treatment and it worked great!
Only the wise deserves better sound quality ! Thank you ,!
I'd wash it afterward also to protect the stylus from the residue
Can't believe the WD40 worked. Washed it again after and it sounded excellent
What is this spray that you use for cleaning? Is it thinner or alcohol or what. thank you
If no distilled water is used, there is carbonate and other minerals in the water. SO, to prevent "normal water" from leaving stains after rinsing, we will have to entirely remove the water from the grooves using a ultrafine textured cloth. Leaving any stains of that water will produce crackles, noises, hiss and similar, which can only be removed using descaling agents afterwards. (this is a method for finally cleaning the grooves indeed) The better method is using distilled water and only minimal amount of tensides. Rinsing with clear demineralized water leaves no stains.
Tried WD-40 on an old, worn meaningless record I once bought and it really worked to get the nastiest crackles out of it. I think by also using high quality fleece you can recover many "lost" records.. this method may be strange. but if it works, who cares :)
Exactly Kid!!
I'm gonna try this method
Just clean the record with dish soap to degrease wd-40. WD-40 leaves an oily residue that will build up on the needle . The chemicals may also hurt the vinyl over time although not proven.
@@manchesterexplorer8519 and vinyl are not chemical than......
Yes it is a good idea to do this before doing a digital transfer. Brilliant idea
What happens when the paper label in the middle gets so soggy you can no longer read the print?
I know this was from many years ago but any suggestions on how to fix scratches
In the 1st production run, "different drum" was pre-scratched at the factory. Congratulations James, you've improved the original version.
Thanks, Mr. Tang! This REALLY DOES work! I tried it for myself on a badly scratched 45 & it worked great! I figured "It's already shot, so what do I have to lose?" It's AMAZING!
good
WARNING!!!!! NEVER DO THIS, IF YOU LOVE YOUR RECORDS!!!!!
WD-40 is a popular multi-purpose lubricant and penetrating oil used for various applications. However, it's important to note that WD-40 is not specifically designed for use on PVC (polyvinyl chloride) or vinyl materials. While WD-40 can be used to lubricate and protect some types of metal surfaces, it may not have the same beneficial effects on PVC or vinyl.
In fact, using WD-40 on PVC or vinyl can potentially cause damage or staining. WD-40 is an oil-based lubricant, and applying it to PVC or vinyl may cause the material to become discolored, greasy, or deteriorate over time.
If you need to clean or maintain PVC or vinyl surfaces, it's best to use products that are specifically designed for these materials. There are numerous cleaners, conditioners, and protectants available that are safe and effective for use on PVC and vinyl surfaces without causing damage.
Always follow the manufacturer's recommendations for cleaning and maintaining PVC and vinyl to ensure the longevity and appearance of the material.
Hey ! Why you don't try to wash the vinyl with the green side of the sponge ?
Does anyone know what kind of brush he's using when he wipes the record at the sink?
I gave the WD40 treatment method a go this morning and just like in the video, the crackle went from medium to practically zero with just the occasional, light click here and there remaining. Here's what I did:
1. clean record on Loricaraft RCM
2. play to assess crackle
3. apply WD40 to cloth and wipe record
4. wipe record dry with a different part of same cloth (I didn't have cotton pads)
5. clean record again on RCM
6. play record to reassess crackle
There's no doubt about it, the WT method (WD40 treatment method) practically eliminates crackle as indicated in the video and as also mentioned, the crackle is still gone even after further cleaning! So in the short-term at the least, it works. Whether there are any long-term negatives, well it's too soon to say. But nonetheless, thanks to our man in the video for sharing with us a way to get rid of crackle ;)
Fwiw, the record I used had been cleaned countless times on my RCM as I use it to soak my spreader with a preparatory clean as it were before cleaning the actual record(s) I mean to clean, so it's safe to say the RCM had no effect on the near elimination of crackle.
DJ
DJ: Thank you very much for your detailed explanation, actually i use high density record cleaning cloth from Japan (not cotton pad , just afraid in case they cannot find the cleaning cloth i have). For a clean record, just use distilled water can handle most of the static noise, for dirty and scratchy records, use WD 40.But after applying WD 40, you can wash it away with dish washer or even supersonic record cleaner, but the WD 40 effect still there!
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
@@Zeppstermeister Shut up you spammer.
Nothing compliments the warm sound of vinyl like the industrial smell of WD40
Wow that's cool but how does this affect the stylus in the long run?
Is it better to use the W-d40 first and then wash it off with water and soap???
What is the name of you used finally liquid ..
WD 40
Dear Sir,
You are a genius!!! Thank you so much for saving the fidelity of all of our old music!!!
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
What record is this? The songs sound beautiful.
Does the WD-40 affect the needle, especially the adhesives for the stylus?
No! Only the skeptical made up this story ,they never tried and act like a scientist. My needles are expensive too!!
Wow just tried this on a record I bought in the 70's that had crackles and pops all through the record but I couldn't bring myself to throwing it away because I loved the music on it and the nostalgia too. I have an inexpensive cleaning system that I cleaned it with first and then did the WD-40 treatment. The record was like new!!!! Not one crackle, hiss, or skip. The record was like new. Thank you for this especially if the WD-40 doesn't do the record harm over time. If it does, I'll let you know.
Well done ! You saved a music life and valuable heritage!
Is this record still fine?
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
Hi Frank, is your 70's record that you mentioned cleaning with WD-40 3 years ago still playing okay?
Stay well.
I haven't played it recently... I'll have to get it out and play again.@@bouyaharumuchi
It's a good method. Vinyl records are a lot tougher than everyone think. I've even used sandpaper on them. I think you can do a lot better and cleaner with silicone oil. It's just a matter of lubrication. THANKS FOR THIS!
Sandpaper? That's some beast mode shit.
@@pechondelgado Up yours
Yeah, and rinse with sulfuric acid. and you're good to go!!@@pechondelgado
@pechondelgado could try acetone if your brave enough hahah
Great tips. I have many old LPs some of which have the same static issues you so aptly illustrated in your video. I am happy to find your video and to see how well it worked to resolve those crackle and pops on the record.
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
What does this due to the needle and does it affect records played after this due to any WD residue?
Nothing will damage your needle,it only act as lubricant to enhace the sound quality and protect the vinyl and needle!
Jesus Christ what did I watch 😂😂
Lol :D
DO I HAVE TO WASH RECORD WITH WATER AFTER APPLYING WD-40?
Milos Djordjevic Yes wash with soap once more.
+James Tang (Sam The Record Man) thank you very much
You are most welcome!
Yes YOU HAVE GOT TO.. OR ELSE..... YOU WILL TOTALLY DESTROY YOUR RECORD!!! YOUR STYLUS, YOUR CARTRIDGE ,ARM, PLATTER, PREAMP, POWERAMP ,SPEAKERS WILL BLOW!!! HOSE WILL CATCH FIRE AND YOU WILL NOT SURVIVE !!!!!!!!
does the wd40 effect the styles/needle?
AWESOME! what material did you use for applying WD-40?
I've used WD40 on an album that was really crackly...the album was a real oldie so no love lost....it came up a treat! Not sure if its buggering up my stylus...but it did the job!
Quick update a couple of days later I could see a slight residue on the vinyl I used some record cleaner and a carbon fibre brush and it came off no worries.Record still sounds good (for a 60 year old record
Everyone here seems to have the same viewpoint. However this gentleman is really on to something.
First, Wd-40 is petroleum oil based and contains no solvents just like vinyl. It will in NO Way harm the record. The label is another story as the adhesive may dissolve from the WD-40.
What make this a excellent method for cleaning that other cleaning solutions lack is a lubricant. The stylus will move much smoother with a lubricant.
The dirt, grime and imperfections ( minor scratches, etc) all obstruct the stylus from gliding ( the stylus need to glide) smoothly.
Even vinyl itself is bit of a grippy surface that prevents the needle from moving perfectly smooth.
The Wd-40 allows the groves to move the stylus easily, with all the other artifacts on the surface having less of an effect on the music.
Also, don't be stupid enough to compare water to WD-40. Try to clean a delicate lock with water and see the results.
Also, for those of you afraid to try this. The cartridge will not get harmed by WD-40 The viscosity is very low and is harmless.
Water and cleaning solutions is another issue, these will leave build up on the stylus and record grooves.
Wd-40 is excellent at removing detergent build up.
Anyone who has used this a lot know what I'm saying.
PS. I did try this method of cleaning a record, and I was amazed at how well it worked. Much better than my $600 record machine. SERIOUSLY!!!!
wallyitcom Thank you so much for your positive comment, hope more vinyl lovers will be beneficial to this simple and economic method😀✌️
Thanks mate x
YOU HAVE ABSOLUTLEY NO IDEA OF WHAT YOU R TALKING ABOUT-PLEASE DONT INFECT ANYBODY---------------LUBRICANT-------------U NEED A LUBRICANT FOR YOUR BRAIN
I use armor all protectant as well as using WD 40 and it well also, just have to play it a few times after a while to get the rubbish out before recording from it. The armor all will give the vynil like you said fill in the minor imperfections and give the vynil a smooth surface to glide on, I'm a fan of having the stylus lasting as long as possible.
Bullshit.
I tried to use the wd40 even in very small quantities, but the oily patina remains on the surface of the disc, impregnates the paper sleeve and glues the PVC sleeves on the disc. how to avoid it?
You need a special cleaning cloth not to attract too many wd40 on it,the oil on label can be cleaned with dry cloth ,add few drop of water if necessary.
I love that he has his stereo stuff right next to water or his make shift kitchen LOL
Don't forget to add some hair conditioner also.... makes it nice and shiny..... :-)
Actually, shampoo and conditioner works well with paint brushes . . . after all, they are made of animal hair.
I've washed my recirds for over 30 years distilled water and simple dawn liquid , no scent ..microfiber brush to groove clean and microfiber cloth to dry ...never a problem ....so all you so called experts with your hi priced products , if those work for you so be it ...notone of my records are damaged nor my stylus ...no snap crackles or pops
WD40 is fairly inexpensive and can be found at Walmart.
@@JoeDWhiteTalks and will wreck your vinyl...
@@ReferenceFidelityComponents actually it won't
So, it works short term. Any report in what WD-40 does long term?
After 6 to 12 months ,if you remove the wd40 with special cleaning cloth ,it still works !
But the needle will collect all the left oil parts from the record groove, in' it?
That’s exactly what happens
@@Lexington365 I second that.
@@bvanpelt8 So why not just spray the needle with WD40?
@@randyashley7282 How long would that last?
Clean the record with dishsoap to degrease it after applying the wd-40 . The wd-40 loosens up all the crud but leaves an oily film.
If WD40 really removes the crackle, I would do the reverse. WD40 first then wash it with dish washing soap to remove the grease off.
same here, it works
just air dry the record or use a micro fibre drying cloth
wd40 is a solvant you use it last so it remove the soap greasy layer
@@flatearthrealitytruth9408 No , you use the WD40 to remove the STATIC you put on it with the towels and lubricate the grooves , if you use the WD40 first , it wont work you imbeciles .
It doesn't work on dust crackle. Might work on static.
Yes, but first wash!After the WD40!!!!!And washing dishes again!And vinyl sounds wonderful!!!
Hello James. Thanks for video. I want to try this method for my older vinyls. I want to ask you about wd 40 versus the needle. Is there a risk of wrapping the needle with wd40 residue and damaging it? Thank you.
my needles is fine after 6 years of wd40!!
@@jamestang1702 Wow i will try then. Thanks a lot. Have a beautiful day and let the positive vibes be with you
I tried this for myself, all of the steps just as he did it (except I didn’t have the brush) and I’m still getting popping noises. Any idea why? I tried it on a 45 that I wasn’t worried about, and even repeated the steps one more time and no improvement. Any advice?
Can you upload before and after using wd 40 the sound quality difference ?
James Tang I stand corrected. I tried your method again on another album, and it was much improved. Maybe the first album I tried it on is FUBAR. Thank you, James
If he is bold enough to wear that yellow jacket then you know he is bold enough to run water , dishwashing liquid and a sponge on his record.
Man, I love these comments. I have never laughed so hard in my life. There are a lot of great people on this planet, with a fantastic sense of humor. I wish I could meet every one of you.
Or you just shut up when it comes to how people dress. Typical yankee comments.
That's an old trick from 60's
I have an promo record of WD-40 on which is recorded that how to repair cracles from the old records. That record get in thogether with WD-40 spray in cca 1967 in europe...
Can you send my a photo of this record? superid@gmail.com Thank you so much!
Has anyone done this and then listened to the same record a couple years later to find out if there were any longer-term ill effects? Also, how does it affect the stylus?
What does WD-40 do to your stylus?
Great stuff! Thanks for sharing
Linda Rohnstadt doing different drum, love that song.
I have found that on my one turntable, the needle starts to get messed up after playing a few records after using the WD 40 😔 I don't know if it's grabbing too much of WD 40 but it causes the vinyl to sound muffled 🤷♂️
I'm thinking it would ruin the stylus, but what do I know?
it defiantly improved the sound weather it's any good for the stylus or the record is another thing entirely
Justin Parkman it’s defiant all right...
This madman is an absolute bloody genius i tell you. This actually worked and i am astonished. Keep up the good work James.
Thank you so much for your kind words Bill, take care 🙏
Does this harm frequency spectrum and quadradial modulations?
Silent Hill Fetishist without a doubt. And will probably wreck any stylus
OMG.
NEVER (REPEAT - NEVER) play a record that has just been washed, even if it has been "dried" with a towel !
Water remains in the base of the grooves and the action of the extreme pressure exerted by the stylus on the wet walls at the base of the groove causes the water to heat and "destroy" the vinyl while playing.
ALWAYS allow the disk to dry (thoroughly) - on both sides - in a warm environment for at least one hour after "washing".
Any scientific test conducted to prove this nonsense?
I clean mine with wd40 wiped off with a piece of kitchen roll , then a damp piece of kitchen roll , then a dry piece of kitchen roll. All in a circular movement, you can see the crap come off! Usually when the stylus gets to the end the bits you couldn't see are collected on the stylus. I brush them off with a stylus brush and play it again. They are usually clearer after that! The really old crackley one's are a wee bit better but that's it! I saw it in a program once that's how I started doing it about ten years ago.
Wow. This method really works, I tried it on my 1985 Sade, Promise which crackles as hell, but WD40 made it almost like new, 90% less crackles. Only one problem, vinyl now stinks WD40. My method:
1. Apply WD40
2. Wash with demineralized water (to partially remove WD40 smell)
3. Wipe with microfiber
You can wash it out,actually i recommend wash it out after apply WD-40, it should still works after washing!
My method:
1. Apply WD40, the way James Tang does it.
2. Wash with a soft sponge and any dish-washing liquid and rinse it.
3. Let it dry in front of a fan. Done.
Just to be sure. This only removes static pops and crackles and not crackles from worn out records?I tried this on an old Kraftwerk lp and it dint make any difference to the crackles on that.
What’s the name of the lp playing ?
Yes. I had occasion to speak to a man at the TORO Lawn sprinkler division that worked as a lead developer of their underground hydraulic valves. The conversation went to sticking or failure to activate and he said they specifically knew of the effects of WD-40 causing plastic melting and deterioration over time. I said due to sticking I tried WD40 on a valve through the inlet without luck. He said WD40 would cause diaphragm failure and orifice distortion. Never use it on plastics!!!! He emphasized. He said it is actually a corrosive agent to plastics. It consumes plastic microscopically. You won't see it happening. The effects are shown over time, so there is no fast proof you seek. It is especially a problem in plastic assemblies and mechanisms that have close tolerances. There is proof however if you take identical samples and then monitor them over time. You will see deterioration to the WD40 treated plastic devices and eventual failure, when the untreated ones continue to operate. You can imagine what it is doing to record grooves (over time)
Nah its fine relax mate.
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.@@jonathaneastwood2927
You are totally right!!!
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
I washed my usb containing very distorted scratchy low res mp3 and sprayed wd40 on it as well, and immediately the files were transformed into dsd-512 quality
lmao
lmfaoooooo!!!!
I bought some DOL grey market jazz LP's and used WD-40 and they suddenly became Music Matters Jazz releases. Even the sleeve changed!
WD40 Upsampling algorythm, now in Roon 4.20
Kinda like doing dishes but you get the reward of stellar audio!!!
what song and album?
I dont even own records I just find James' behavior relaxing
Hmm
I did this with my dad's old beatle album I found. Not sure the name but it had a white cover. Said he bought it the day of release so wanted to make sure it was still sounding good for him. I'm homeless now
Jonny Beggs Don't ever give up, things will be alright at last!
@@jamestang1702 thank you Dr Tang
Jonny Beggs You are welcome and thank you for your positive comments!
Never experiment with any record that has a number on it. But in your defense not even Ringo know where his copy is.
I know I'm very late but If you are indeed telling the truth you got one hell of a album and something that worth tons of money
Is it ok to use WD40 on UB40?
Can you share more info on the brush you used? It was so quick I could not hear what kind of brush you used.
I can’t wait to try this
The effect of the WD40 is, as you noted in the description, mainly caused by the fluids in the chemical. You will have the same effect when playing a record wet with distilled water. The fluid is removing static from the record but since you add a whole lot of other substances with WD40 into grooves, you'll cause a loss of frequencies or high-end detail. Wouldn't recommend the WD40 approach, you probably don't damage the record per se but you are just cheating your way out of a deep clean process. Also using a detergenent adds substances into the grooves, which in essence isn't right. The only way to deep clean a record is by using anti static tools and double-distilled water or a record vacuum cleaner (both for the best effect).
I remember buying and using those cleaning kits with silicone liquid. The needle got so dirty it would skip the remaining tracks and I had to wash my records.
BTW, noticeble loss of high end frequencies in this video after WD40 was sprayed. What do you think of using wood glue to clean the records? It seems a good idea though hard to do it properly.
Rodolfo Netto I lost one red vinyl with wood glue , there are too many kinds of them,that's why I don't recommend, WD 40 is for seriously scratchy records, for normal vinyls use distilled water and high density record cleaning cloth is good enough.
NORMALIZATION OF IGNORANCE ....nothing wrong with using water on a record,.....as long as its distilled. I've been deejaying for 35 years and it's one of the simplest ways to remove and reject incoming static from clean records.
Best way to clean vinyl records is using a rubbing alcohol solution. You don't want water residue on the records. Even if distilled, it needs to dry quickly (which alcohol does) or it CAN/WILL warp the record. Notice he is wiping the record with a sponge... dirty sponge... not good. There are anti-static brushes and clothes that one can use. Oil (such as WD40) is not good to have on records. And don't use alcohol on non-vinyl records or older vinyl composites. Use distilled water for wont of anything better. Saying you've been a dj for 35 yrs means nothing. DJs haven't played records for 20 yrs or more. I've been a DJ, am a DJ (playing records), and a record collector for over 45 yrs. Big deal. That isn't what makes anything I said valid. What may make it valid is experience with records as a record owner.
James, You are the Best...
So what does the WD40 do? Is it a chemical reaction?
Is there any long effects ? As far as damage from the wd40 ?
After 6 years the vinyl and needle still ok!
WD40 doesn't damage PVC so it should be OK. Might be wise to keep the Turntable dust cover closed whilst in use since moving parts create static which will attract airborne particles to stick to the disc.
WARNING!!!! This is what WD-40 says: Using WD-40 or any other lubricant or solvent on vinyl records is not recommended. WD-40 is a penetrating oil and water-displacing spray primarily designed for lubrication and rust prevention. Applying it to vinyl records can damage the surface of the record and potentially ruin the sound quality.
Vinyl records are delicate and should be handled with care. If you need to clean a vinyl record, it's best to use a specialized vinyl record cleaning solution and a soft, lint-free cloth designed for record cleaning. Follow the manufacturer's instructions for the cleaning solution and be gentle when cleaning the record to avoid scratching or damaging the surface.
You guys who act paranoid remind me of the nonsense I listen to in the astronomical forums. Relax and just try it on an old LP. It works great.
Its not the record we care about its the stylus
@@guitarslf132
Exactly if you have an expensive cart
Hell no
nobody is paranoid, we just learned some physics and chemistry, that is all.
I wonder if WD 40 can damage the stylus? I’m getting a new cartridge soon, so I think I’ll try the oil method on an old record before I replace it. Well done.
What about the stylus after all that grease in the grooves? if someone could tell it, it would be really useful !
Just clean it with a tiny soft brush (with alcohol) as usual after listening.
This will remove the static but wet playing results in black residue on the stylus and cantilever; not good for your stylus.
Yougan Aungamuthu what evidence do you have that this isn’t good for the stylus? Back when I played vinyl I played records wet all the time and never saw any black residue nor did I have any degradation of the audio or the stylus over time. And I am (was) a serious audiophile and even cut a few records in school.
That was probably dirt!
@Munt Conkey Just my eyes and ears after years of playing records dampened with a fine spray after placing the records on the turntable. Much lower noise floor.
@Munt Conkey No evidence that there is any harm. I never saw any residue nor heard any degradation over time.
I wish I would have know this in kindergarten (1970). I took all my brothers 45 records and put them in the bathtub with bubble bath to clean them. It was his Beatles 45 collection. No kidding.
I think that shows initiative.
And you got to live?
This is like sawdust in engine oil. It sounds good at first. What are the long term effects of this.
What record you playing?I like the music
The Album is Called Linda Ronstadt's Greatest hits. Her work as a solo artist, and her work with the band The Stone Poneys.
Being a belt and braces type, I clean the vinyl first with lukewarm soapy water, then spray WD40 onto the vinyl and wipe it off with a cloth. Some folk say never put oil on vinyl and they are right when the oil is a petroleum based one. The oil in WD40 is fish oil and is not harmful to the vinyl. The last step of the cleaning process is to apply a thick layer of wood glue and push it into the groove with an old credit/bank card or business card. Leave it to fully dry for 48 hours and then peel the dried glue off. I say thick layer as that peels off in one and a lot easier than a thin layer. The glue brings out any left over dust, the WD40 residue and somehow (I don't know how) it also removes any static from the vinyl.
It's not fish oil at all, it's mineral oil. However it's not harmful to the plastic per se, at least not the oil part. WD40 also contains alkane solvents that are potentially harmful to the plastic.
result audible, but i'm more worried about the stylus wear/clogging/dmg. ..
My Koetsu is hiding under the table after watching this.
Well, it should lessen the friction and you can always clean the stylus with a brush and some isopropyl alcohol.
I LOVE his minion's suit! Fancy, glamorous and silly (all in one, at the same time!).
What will be the effect of WD-40 on the stylus?
It wil ruin the suspension
"Jimmy don't forget to wash the LP's and take out the trash"
lol