Thanks for watching! I can’t thank everyone enough for sticking with this project, I can’t wait to blow you away with the next one in the pipe! And we should have an AK-50 update as early as next week as well! If you’re interested in checking out the Patreon, here’s the link below: www.patreon.com/TheAKGuy
cardiffpicker1 depends where ya live I guess. There’s usually not much around big cities. I guess you could always drive to the mountains or desert though depending where you live
I'd love to make my own using the Dragunov and PSL furniture as the basis for its look and design. Except make it modern polymer and give the stock full adjustment, and the handgaurd the appropriate MLOK slots
arkan purnama here in Soviet Union we only use UA-cam commie I think in capitalist countries you just call it UA-cam red for the color of the great Marshal Stalin
That1GuyOnPoint that’s technically impossible you can make an AK like gun but the AK proper design can’t handle it even the AK 50 Brandon made isn’t a true AK
@@loganfulcher8397 now what makes an AK is how the gas block and operating cycle, there are meny AK variants with different calibers. 7.62x39, 5.45x39, and even .50 bmg
@@ds6872 idk I could buy the parts and build the rifle with cheaper parts and I'd be about the same. His budget is just better than mine because I'm poor
Cool, my ar10 in 6.5 creedmoor can do that too. Also, it only cost $700 from PSA. I'm just giving you shit bro, lol. This is really cool, I'd love to have one. Great job Brandon, keep pushing the envelope bro.
I love my PA10 as well, cost me under 600 bucks...pretty insane. It's a great shooter for what should hardly run comparing the cost to what many would consider a "nice" AR10
@Krieg Krazy ive seen a video of an older man who actually tested the aks in the 80s and 90s and was shocked about the accuracy up to about 400 yards. The reason why they are considered inaccurate is due to poor marksmanship of the terrorists using worn out guns. Russians were taught to shoot at the belt buckle inside 200m, since the zero was set to somewhere around that range thereby guaranteeing a chest hit.
The AK, specifically chambered in 7.62, is a great rifle but don’t be delusional. As someone who owns rifles from both sides of the iron curtain the differences are very apparent in terms of quality, accuracy and use case. Russians favored the “tried and true” and mass produced while the west went to a lighter, more accurate and portable rifle and intermediate cartridge. The major reason why the USSR used 5.45 in the 74 was due to positive attributes they saw in 5.56 and the armalite-pattern rifles. The AR/M16/M4 rifles are more accurate because they generally have better parts, mainly triggers and barrels, and tighter tolerances from the factory. That’s not to say the new Kalishnikov rifles didn’t improve, don’t have the ability to be “fixed” with upgrades or can’t be accurate. I just think it’s kinda disingenuous to say the AK is more accurate especially when you look at it from a service rifle perspective. The M16 or M4 stock is far more accurate.
Not entirely. Ak47s have a reputation that is both too good and too bad. They are thought not to be accurate, and thats mostly because they were designed to be the cheapest infantry rifle possible. So workmanship amd tolerance werent really thought about. Also, the standard 7.62x39 round while it can be pushed much farther than people think, is usually not very good past 350-400 yards. A new well made ak47 can be solid accurate and good looking. On the other hand, people say ak47s never jam never break, never fail, bullshit. Ive shot a lot of them, and ive seen every type of gun fail including the ak47. It holds up better than a lot, but its definitely not indestructible or unjamable. On the other side, the ar15 platform is more susceptible to jaming from dirt because its internals are just closer together. Some are better than others, but none as loose as an ak47. But their tight tolerances and solid receivers make them much more condusive to accuracy. And the inline recoil and buffer tube going straight into the stock close to the shoulder, just make the ar a gun thats easier to shoot fast accurately. Ive never seen a competitive 3 gun shooter who runs an ak47. By that i mean, ive seem them at competition, but they are there for fun, not to win.
Greg Carvlin that’s why I prefer 5.45. I own an LWRC M6 and a Bulgarian ak74 (with some external upgrades) and find it just as nice as my AR. I do not like 7.62 aks though. Obviously the ARs have a bit higher quality parts and are more customizable, but I have ZenitCo parts on my AK so I still have a bit of customization. Both platforms are very good, but aks defiantly need a few more upgrades to be comparable to ARs.
Correct me if I'm wrong but I'm pretty sure like 70% of the AR is aluminum just saying now your standard AK is made of Steel unless you're fancy and you got one of those Billet aluminum lowers now I love the AR and the ak I'm no scientist but I do believe that steel will Rust and aluminum does not
@@vintagestealth8802 yea I figured because I noticed all the other comments are liked, I wonder if an edit auto un-likes it just so you cant make it say something bad after the creator likes it, if so then that's some good foresight on the part of yt. E: Upon reading the other reply, that is the case. That's cool never knew
There are Vepr sized (20mm) gas blocks available that use a 20mm gas block area on the barrel. So your barrel could be around 19.5 mm. Great work Brandon. It would be awesome if there was a U.S. manufacturer that would make a line of "SVD like" rifles with, adjustable gas, short stroke piston, in different calibers.
Hey man. Just wanted to say that the first ever rifle I’ve purchased Is one of your magpul akg 47s. Q2 batch. I’ve seen how you actually care about your products and you’re passionate about aks and your company. And I gladly put my trust in your rifle. Great video and I can’t wait for what the future has in store for you and your company.
$2000 for such a unique gun is a steal, I think. Just for the reference - in Russia Kalashnikov SR-1 has a MSRP of $1899 ATM, and the thing is relatively mass-produced! Molot guns in .223, .243Win and 6.5 Grendel are way cheaper (~ $600), but I doubt they can offer such a high accuracy at such a long range.
Man I Love how you prove wrong all The "this darn AK think can't hit past 300m" bullshit. Beautyful gun, Awesome video i'm waiting for 1 milion subs u honestly deserve this
The AK is not accurate with its original round is what people meant. That rifle looks incredible and the finish and fit on it that I can see is immaculate. I hope to pick up one your builds in the future as my first AK!
With pistol caliber carbines being all the rage right now, I think a Vityaz style rifle chambered in 7.62x25 Tokarev using PPSH mags would be fucking awesome.
"Brandon, no." "BRANDON YES, BRANDON ALWAYS YES!" Really though, all you did was change the barrel, gas block, and the trigger. All the working bits where still stock, damn.
Have a twenty inch barreled VEPR in 6.5 Grendel that I've shot to a 1000 yards pretty successfully, though it felt like I was pushing it a bit. I'm using a Beryl style optics mount on it, which is holding zero, at least, but I'm also using a lighter scope on it. I think I'd like to get a 16 inch carbine made in the Grendel as well, as I've become really fond of the cartridge for hog control, but lugging that target AK around isn't as fun. Anyways, nice build here, Brandon. Really like the idea, and SUPER like that handguard.
I’m pretty sure when people say AKs are inaccurate, they are referring to a standard 7.62 version. Of course it’s going to be accurate when you re-chamber it to .224, put a nice long barrel and a high power scope.
Hey man i love your content, not only is it enjoyable to watch it's also pretty informative. You've motivated me to successfully build my own ak from an 80% with 0 hiccups. Ps. Just signed up for your patreon
When people say an Ak is inaccurate, I believe they are talking about your standard off the shelf Ak that doesn't have hundreds or thousands of dollars in upgrades done to it. Just my opinion as an all around gun lover, but take a standard scoped Ak in 7.62x39 and try to do the same thing, I don't think it would perform quite as well. However, I commend you Brandon for building one heck of a nice gun and showing that anything is possible with skill and effort.
Dustin R Of course not. My point is it’s not the platform. Compare apples to apples, and the platform proves it’s more accurate than 99.9% of users are capable of being.
a regular person is not going to shoot that far in almost any situation in life. that said i want one now!! nice rifle cant wait to see other badass ak rifles you make
I've been watching your channel for a long time and it always amazes me what you manage to get up to! I love you work and I am very much looking forward to all your future videos an inventions! Keep up the great work! :)
Nice, now hit past 2,000. That's the bar bro. So you're about half as accurate as the best ar platform. Congrats. 6.5 creedmore ak next. Let's see if it can compete.
I don't think this is a "for the hell of it" gun, I see this as a VERY potent kit, with real world application, I would also love to see a 6.5 creedmore ak but I could definitely see that needing an oversized action but 762x54r and 762x51 would both be awesome too
Never understood the idea that ak's were inaccurate. My Dad bought a surplus sks for a hundred bucks back in the 90's and with a fiberglass stock and really good cleaning was an all day 300 yd rifle.
100% always depends on the shooter, not the weapon. I feel like most weapon platforms have the ability to amaze and stun us, just need to get the right hands and eyes behind them. Great looking gun as usual.
Would like to see some handloads like 80 plus grain 30 cal bullets in 7.62x39 I have M77 zastava and been playing around with hand loads like 125 grain Speer TNT which I think 7.62x39 shooter would love and a video on reloading for the 7.62x39 would be awesome especially with this ammo shortages
I saw a video of a guy shooting his 7.62x39 AK at 850 yards with an Athlon optic and he was fairly consistent with hitting a man sized target with standard tula ammo... 6 seconds to impact was crazy though😂
Thanks for watching! I can’t thank everyone enough for sticking with this project, I can’t wait to blow you away with the next one in the pipe! And we should have an AK-50 update as early as next week as well!
If you’re interested in checking out the Patreon, here’s the link below:
www.patreon.com/TheAKGuy
Hell I'm saving up to buy my first ak from u
100% like to dislike ratio
Now make a pmagunov clone. 308 sweetness
Chances are, you might get a Shot Show 2020 feature for this wicked awesome creation
If the Russian federation offered you a bid to adopt the design for there armed forces would you take it?
I need to buy one so I can take it to my 25 yard indoor range and flex.
*sigh* the struggle I know it all to well T T
Why does my life revolve around just trying to flex
@@ulyssessigaran you could always go to a bigger range
cardiffpicker1 depends where ya live I guess. There’s usually not much around big cities. I guess you could always drive to the mountains or desert though depending where you live
@@Bloodreign137 my indoor range is 200 metres or about 219 yards, not huge but God for indoor and great for zeroing because our weather is shit.
My AK74 shoots 1000 yards too. I just can't hit anything. Lol. Great job.
😂😂😂
You have developed the druganov of the 21st century
The dragunov is a completely different design this is more of a PSL then a dragunov
I'd love to make my own using the Dragunov and PSL furniture as the basis for its look and design. Except make it modern polymer and give the stock full adjustment, and the handgaurd the appropriate MLOK slots
MrNingaWarrior blasphemy
@@MrNingawarrior so basically an SVD-S with an adjustable length stock and different slotted handguards?
Nah the Dragunov would struggle more to make those hits lol
Even Mikhail Kalashnikov would very proud himself if see this gun
Rimura San you evil capitalist put crusty American cartridges in my great commie gun
That's how gun economic work we sell gun's bullets or trade some with other countries we make money with you people
@@kalmenbarkin5708 why r u commie watch UA-cam
arkan purnama here in Soviet Union we only use UA-cam commie I think in capitalist countries you just call it UA-cam red for the color of the great Marshal Stalin
The ghost of Mikhail Timofeyevich is smiling.
Next time make a 2,000 yard AK chambered in 40mm BOFORS.
That1GuyOnPoint that’s technically impossible you can make an AK like gun but the AK proper design can’t handle it even the AK 50 Brandon made isn’t a true AK
@@kalmenbarkin5708 just put enough duct tape and zip ties on it and I'm sure it'll handle whatever you can throw at it
That1GuyOnPoint for 40 BOFORS you’re gonna need a lot of duct tape
@@kalmenbarkin5708 flex tape might do the job better
That1GuyOnPoint BOFOR THESE NUTS
People: aks aren't accurate
Brandon: hold my beer
Vodka*
Hold my kvass
*hold my kompot*
No no no, knowing Brandon he'd say hold my whiskey
@@someguywithachannel7590 90 proof or 180 proof
"Oh AKs aren't accurate" "RIFLE IS FINE!"
Yea 1000 yards in .224 valkyrie is easy.. let's see you hit 1001 yards.
thats gonna be the challenge right there!
Smart ass use the 762 by 39 Round that's what makes it an AK
mxt mxt did you even watch the video?
@@loganfulcher8397 now what makes an AK is how the gas block and operating cycle, there are meny AK variants with different calibers.
7.62x39, 5.45x39, and even .50 bmg
@@Robert53area and even 556 and 308
This video shall be referenced during AR vs. AK. That's legit man.
That ak is awesome, no arguing that. You could build an AR with comparable performance for alot less money
@@ds6872 idk I could buy the parts and build the rifle with cheaper parts and I'd be about the same. His budget is just better than mine because I'm poor
Is it accurate? Y e s
Does it look good? Y e s
Is it an AK? Y e s
Cool, my ar10 in 6.5 creedmoor can do that too. Also, it only cost $700 from PSA. I'm just giving you shit bro, lol. This is really cool, I'd love to have one. Great job Brandon, keep pushing the envelope bro.
Its almost like your experience is proof of how easily the ar platform can be made into an accurate rifle....like we all know haha
I love my PA10 as well, cost me under 600 bucks...pretty insane. It's a great shooter for what should hardly run comparing the cost to what many would consider a "nice" AR10
I'll take ten.
...no seriously though, I'll take ten. Put these baby's into full production.
I'm convinced that all the myths about the AK and Armalite platform was just Cold War propaganda.
@Krieg Krazy ive seen a video of an older man who actually tested the aks in the 80s and 90s and was shocked about the accuracy up to about 400 yards. The reason why they are considered inaccurate is due to poor marksmanship of the terrorists using worn out guns. Russians were taught to shoot at the belt buckle inside 200m, since the zero was set to somewhere around that range thereby guaranteeing a chest hit.
A lot of the myths come from the USSR infantry doctrine. The do not usually zero rifles and aim completely different from westerners
The AK, specifically chambered in 7.62, is a great rifle but don’t be delusional. As someone who owns rifles from both sides of the iron curtain the differences are very apparent in terms of quality, accuracy and use case. Russians favored the “tried and true” and mass produced while the west went to a lighter, more accurate and portable rifle and intermediate cartridge. The major reason why the USSR used 5.45 in the 74 was due to positive attributes they saw in 5.56 and the armalite-pattern rifles. The AR/M16/M4 rifles are more accurate because they generally have better parts, mainly triggers and barrels, and tighter tolerances from the factory.
That’s not to say the new Kalishnikov rifles didn’t improve, don’t have the ability to be “fixed” with upgrades or can’t be accurate. I just think it’s kinda disingenuous to say the AK is more accurate especially when you look at it from a service rifle perspective. The M16 or M4 stock is far more accurate.
Not entirely. Ak47s have a reputation that is both too good and too bad. They are thought not to be accurate, and thats mostly because they were designed to be the cheapest infantry rifle possible. So workmanship amd tolerance werent really thought about. Also, the standard 7.62x39 round while it can be pushed much farther than people think, is usually not very good past 350-400 yards. A new well made ak47 can be solid accurate and good looking. On the other hand, people say ak47s never jam never break, never fail, bullshit. Ive shot a lot of them, and ive seen every type of gun fail including the ak47. It holds up better than a lot, but its definitely not indestructible or unjamable.
On the other side, the ar15 platform is more susceptible to jaming from dirt because its internals are just closer together. Some are better than others, but none as loose as an ak47. But their tight tolerances and solid receivers make them much more condusive to accuracy. And the inline recoil and buffer tube going straight into the stock close to the shoulder, just make the ar a gun thats easier to shoot fast accurately. Ive never seen a competitive 3 gun shooter who runs an ak47. By that i mean, ive seem them at competition, but they are there for fun, not to win.
Greg Carvlin that’s why I prefer 5.45. I own an LWRC M6 and a Bulgarian ak74 (with some external upgrades) and find it just as nice as my AR. I do not like 7.62 aks though. Obviously the ARs have a bit higher quality parts and are more customizable, but I have ZenitCo parts on my AK so I still have a bit of customization. Both platforms are very good, but aks defiantly need a few more upgrades to be comparable to ARs.
Ashes to Ashes.. Dust to dust a AR15's only enemy is politicians and rust
Stealing this
Correct me if I'm wrong but I'm pretty sure like 70% of the AR is aluminum just saying now your standard AK is made of Steel unless you're fancy and you got one of those Billet aluminum lowers now I love the AR and the ak I'm no scientist but I do believe that steel will Rust and aluminum does not
@Cav Trooper 19D just got bored and said fook it
@Cav Trooper 19D yo thanks a lot I hope your having a great memorial day as well!
Cody Daniel that should tell you how dangerous politicians are! Haha
Mikhail kalashnikov would be proud. Absolutely amazing I'm saving this video and throwing it at the fudds at the gun store
AR guy: aks aren’t accurate
Brandon: builds a DMR Ak that isn’t an SVD
AR guy: am I a joke to you
Brandon: yes!
I knew you could do it you crazy bastard. Badass man 🤙🤙 now hopefully I’ll win it 😜😂😂😂
Discord gang. We need to get Brandon on some weights
Thanks Brandon for doing what you do!! I never miss a video!! Watch all the way to the end.
So you have St. Anger tunes without the tung tung tung grandmother banging on pots in the background. Nice 👍
Ar ppl: aks cant go 1000 yrds
Brandon: hol my beer
Vodka, not beer lol
But can they go a mile? an AR can.
Tatsuhiro Satou I mean that’s just 760 yards more
Get to work Brandon
That's like saying a Honda can't go 200mph, then you put a $20k fully built engine and tranny in it, and then brag it went 200mph.
no one:
Brandon: 10 miles AK-74
Hit your head🤣🤣
In 10 yd hahaha
I’d cop one for damn sure.
Edit: AK Jesus liked my comment, my day is made.
Lmao why did he un-like it?
gto_173 idk but he liked it before. Maybe because I edited it 🤷♂️
@@vintagestealth8802 yea I figured because I noticed all the other comments are liked, I wonder if an edit auto un-likes it just so you cant make it say something bad after the creator likes it, if so then that's some good foresight on the part of yt.
E: Upon reading the other reply, that is the case. That's cool never knew
First .50 BMG AK. First .224 Valkerie Ak. First.....? I'm excited to see what's next.
First 800mm AK?
There are Vepr sized (20mm) gas blocks available that use a 20mm gas block area on the barrel. So your barrel could be around 19.5 mm. Great work Brandon. It would be awesome if there was a U.S. manufacturer that would make a line of "SVD like" rifles with, adjustable gas, short stroke piston, in different calibers.
Hey man. Just wanted to say that the first ever rifle I’ve purchased Is one of your magpul akg 47s. Q2 batch. I’ve seen how you actually care about your products and you’re passionate about aks and your company. And I gladly put my trust in your rifle. Great video and I can’t wait for what the future has in store for you and your company.
Texan Renegade Means a lot man!!
Turns AK into a sniper
Dragunov: Am I a joke to you?
SloppyStock Animation its still technically not assault rifle and dragunov is a battle rifle/Designated Marksman Rifle
Da, tovarich.
A dragunov is very different inside, not like a PSL.
@@gaydolfhitqueer835 Don't care
$2000 for such a unique gun is a steal, I think. Just for the reference - in Russia Kalashnikov SR-1 has a MSRP of $1899 ATM, and the thing is relatively mass-produced! Molot guns in .223, .243Win and 6.5 Grendel are way cheaper (~ $600), but I doubt they can offer such a high accuracy at such a long range.
This shit is badass. It looks so cool too. Congratulations on being a badass genius.
Its been 5 years Burt hope you are doing great
I love that you used AK parts from my country (Bulgaria)!
kannax Bulgarian AKs are the best
Sweet Pea, the most favored of my collection, is a Bulgarian.
That’s pretty dope
Man I Love how you prove wrong all The "this darn AK think can't hit past 300m" bullshit. Beautyful gun, Awesome video i'm waiting for 1 milion subs u honestly deserve this
New update of Escape from Tarkov is looking good !"
Brandon would fit pretty well as a trader on that game. Dealing with crazy mods and the Ak-50. !!
Nice setup and a very nice round that will be up there with the 6.5 Grendel for the replacement of the 5.56
338 lapua AK would be sick 😁 possibly a 300 win magnum
oh this video brings me sooo much joy. Time to send it to all my AR friends. :)
This guy is the Linus of gun channels
0:24 that's Frantic by Metallica. Thought we wouldn't notice, but we did.
Now try to build an AK in 7.62 that can hit 40 yards. It might be impossible, but try it!
JMac is one hell of a dude!!! Congrats on 1000y build!
Fucking amazing. Thanks man. I might be preordering one. Im so sick of ar guys bashing aks as a platform in general.
Beautiful job! Major props to you for maxing an AK to its full potential. With love from the Uk with much jealousy! Keep up the awesome work mate!
i mean, it is an ak, but its 224 not 5.45 or 7.62 so idk
Thats what I was thinking, you could do that with any gun lol
Wow, and you can hear that wind a blowing. Great shots!
Disclaimer: No AK parts were -harmed- used in the making of this "AK".
Original Bulgarian bolt, though they had to grind out the face a bit to fit the fat .224 case head.
The AK is not accurate with its original round is what people meant. That rifle looks incredible and the finish and fit on it that I can see is immaculate. I hope to pick up one your builds in the future as my first AK!
Please CNC a Dragunov for the American market!! i will pre order 2 right off the bat!!!!!!
With pistol caliber carbines being all the rage right now, I think a Vityaz style rifle chambered in 7.62x25 Tokarev using PPSH mags would be fucking awesome.
"Brandon, no."
"BRANDON YES, BRANDON ALWAYS YES!"
Really though, all you did was change the barrel, gas block, and the trigger. All the working bits where still stock, damn.
I wonder how many lists I'm on for watching yours and similar channels from the UK
Shit,I just asked my self this same question last night. And I'm in the U.S.
Maybe those Slav countries will buy this product now lol!
I was thinking about that 🤣
Have a twenty inch barreled VEPR in 6.5 Grendel that I've shot to a 1000 yards pretty successfully, though it felt like I was pushing it a bit. I'm using a Beryl style optics mount on it, which is holding zero, at least, but I'm also using a lighter scope on it. I think I'd like to get a 16 inch carbine made in the Grendel as well, as I've become really fond of the cartridge for hog control, but lugging that target AK around isn't as fun.
Anyways, nice build here, Brandon. Really like the idea, and SUPER like that handguard.
I’m pretty sure when people say AKs are inaccurate, they are referring to a standard 7.62 version. Of course it’s going to be accurate when you re-chamber it to .224, put a nice long barrel and a high power scope.
Hey man i love your content, not only is it enjoyable to watch it's also pretty informative. You've motivated me to successfully build my own ak from an 80% with 0 hiccups. Ps. Just signed up for your patreon
When people say an Ak is inaccurate, I believe they are talking about your standard off the shelf Ak that doesn't have hundreds or thousands of dollars in upgrades done to it. Just my opinion as an all around gun lover, but take a standard scoped Ak in 7.62x39 and try to do the same thing, I don't think it would perform quite as well. However, I commend you Brandon for building one heck of a nice gun and showing that anything is possible with skill and effort.
Dustin R Of course not. My point is it’s not the platform. Compare apples to apples, and the platform proves it’s more accurate than 99.9% of users are capable of being.
a regular person is not going to shoot that far in almost any situation in life. that said i want one now!! nice rifle cant wait to see other badass ak rifles you make
Nice to see some appreciation for the St. Anger album.
It sounds off to me tho
@@salty_cracker69 Might be one of the re-recorded versions. A few people have covered the whole album to give it cleaner production.
That's one small step for man, one giant leap for mankind. This man just hit a target at 1000yrd with an ak.
So you're basically an ak fanboy who has the money, equipment, and knowledge to just build an ak for literally any purpose. Fucking love it dude.
keep up the work man ur a really humble dude luv u bro
I can’t wait any longer for my beloved AKG
This was a great series of vids to find wow. Gotta get one. A whole AK set. Wow.
From Nam to front line defense is one hell of a drive for range day
I feel like I remember seeing a 1000 yard AK on Sons of Guns back in the day.
I was thinking that too, so this is the first 1000 yard ak not built by a pedophile.
I'm into competition target shooting and into AK rifles, if you decided to do a production run of these I would definitely pick one up.
So you practically built a modern, 5.45mm version of the Tabuk rifle (Iraqi DMR based on Zastava M76 which is essentially an AK-pattern DMR)
Damn that's awesome what a stellar video always a good time watching the ak guy. Awesome video man and congratulations
I've been watching your channel for a long time and it always amazes me what you manage to get up to! I love you work and I am very much looking forward to all your future videos an inventions! Keep up the great work! :)
It's so beautiful. You've managed to combine two of my favorite things the AK and long range shooting.
Ive got something really special that i think youd like coming up soon!
Nice, now hit past 2,000. That's the bar bro. So you're about half as accurate as the best ar platform. Congrats. 6.5 creedmore ak next. Let's see if it can compete.
Now, just for the he'll of it, you should incorporate the bolt hold open, with external release, like the Zastava M70 A into the AKG 47.
RS Regulate mounts are my go to for AKs. Experimented with the Ultimak and went back to the RS. Damn, now I want that AK 224 now in my life.
I really wish this channel had a bigger community following, imagine what could be done with 10x more funding..
hopefully someday that will happen!
Impressive, I really like my AK's. After the .224 Ar is completed could we see a AR vs AK guy video based on the 2 rifles?
I am glad to say that I support you.
I'm really hype for the ak50
Yeah! He did it!...... Now we wait for word on our pre-order's
Adrian TenEyck Trying to get the max amount of orders so I can lower the price for everyone. MUCH cheaper to do 25 custom barrels than 5.
I don't think this is a "for the hell of it" gun, I see this as a VERY potent kit, with real world application, I would also love to see a 6.5 creedmore ak but I could definitely see that needing an oversized action but 762x54r and 762x51 would both be awesome too
Pretty awesome! That ak’s almost as sexy as Brandon. Why not try .223 ak mags? They lock up in a 74’. The feed angle would be better
Never understood the idea that ak's were inaccurate. My Dad bought a surplus sks for a hundred bucks back in the 90's and with a fiberglass stock and really good cleaning was an all day 300 yd rifle.
I'm so glad I ordered one of these, going to shut down a range buddy that thinks his gear makes him hot shit.
You should make an AK in fif- oh wait, lol nice job on the 224 and good luck in the production of that AK 50!
Ok, no denying that, no matter who or what you are...that was totally badass!
Holy shit this is amazing good job Brandon
0:25 Frantic!
Awesome video and congratulations on how good this thing worked out.... you have become a major force to be reckoned with in the AK world 😁👍
Great proof of concept. AR or AK, the more good guns out there the better. Great work!
This is the coolest Ak build ever wtf
This was a great achievement and you should be really proud, great job love seeing guys like you try new things and succeed.
Making history amigo good job!
100% always depends on the shooter, not the weapon. I feel like most weapon platforms have the ability to amaze and stun us, just need to get the right hands and eyes behind them. Great looking gun as usual.
I'm also a believer in the ALG AKT. I put one in my build of a Romanian PA md 86 and they will be going in all my future AKs.
Even if AKs weren’t accurate custom building a rifle in a atypical cartridge doesn’t really prove they are accurate.
Ak may not be the best, but no other rifles can change my mind. Thanks bro its a nice video and you did good building that Kalashnikov.
id like to see the akou run some of these prototypes. great job on this one!
Great build. Great video.
Disappointed you never introduced the marksman who landed the first hits.
You were too caught up with if you could but you never stopped to think about if you should
Would like to see some handloads like 80 plus grain 30 cal bullets in 7.62x39 I have M77 zastava and been playing around with hand loads like 125 grain Speer TNT which I think 7.62x39 shooter would love and a video on reloading for the 7.62x39 would be awesome especially with this ammo shortages
0:24 hey it's Frantic with a good snare.
I saw a video of a guy shooting his 7.62x39 AK at 850 yards with an Athlon optic and he was fairly consistent with hitting a man sized target with standard tula ammo... 6 seconds to impact was crazy though😂