Samsung Dryer Will Not Start Diagnosis and repair
Вставка
- Опубліковано 3 жов 2024
- Call us today with you model number and we will make sure you get the right part
888-655-8569
In most cases we can get you the part the next day if ordered before 4pm central time.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Donations are appreciated as well you can donate here - www.paypal.me/...
If you need the belt and/or pulley the link for them will be below.
Pulley and Belt- amzn.to/2Nn4eTE
Pulley- amzn.to/3nMtrFN
Belt- amzn.to/30b7HdY
If you need a video on how to re-install the dryer belt thing video will help a bit. All dryers have a pulley system similar to this one.
• How to get dryer belt ...
This dryer drum would not turn. I thought the belt was just broke but turns out the pulley was wore enough that the belt just fell off and looked good enough to use so all we needed to do was replace the pulley.
This video will show you how to take this dryer apart and replace the pulley. This will work on most samsung dryers but it may be slightly different. It is the same part number across the board for the new updated pulley and belt. This video will help you if you dryer will not turn. When you hit the start button it will not turn due to the dryer belt switch not engaging because the belt is off. That fan will not blow and is just a safety concern so it will not start. Another thing it could be would be the door switch Which is not as common as a broken belt or damaged pulley. If you need a switch just let me know and ill try and help you find one.
Good luck everyone and thanks for watching! Like and subscribe!!
Disclaimer:
I am a proud affiliate/sponsor of these products/services. All opinions and recommendations are honest and expressed with the good intent that you will find them of value. Purchasing through these links will not affect your check out process in any way, but it will support this channel and allow me to keep making valuable videos for you. Thank you for your trust. - Навчання та стиль
Thank you very much, woke up this morning and found the dryer not spinning, watched you video and found almost the same problem except the belt was still on the drum! Awesome video very helpful!
This was a great video! If you start your dryer and the drying light is blinking, but nothing is happening... this is probably the cause and this video does a great job of explaining how to change out that pulley.
My dryer is a Samsung DV40J3000EW/A2 and the part he has listed in video description is the one I purchased and it is working perfectly.
Thank you for helping me fix my dryer!
I just followed your instructions step by step changing out the pully and putting the belt back on, and now it works perfectly.
THANK YOU! THANK YOU!
Just took apart dryer, and sure enough pulley was broken, ordered belt and pulley with link provided for less than 20 bucks, glad I discovered this video, thanks for the info
Awesome video was able to take dryer apart easily step by step and found a sock and a bra pad stuck in the plastic turbine attached to the motor! One of my daughters forgot to put the filter back in before running the dryer! 👍🏼🤙🏽
Followed this video on my Samsung dryer and it was perfect. It was the pulley in my case and on a Saturday when my wife normally does laundry. She had a heavy load ready to hit the dryer when it stopped working. Luckily I was able to put the plastic pulley back on the bushing after cleaning it with a penetrating oil. I will order the part and replace with new in a couple days. Much thanks to Bearded Appliance Repair!
This was a great help, thank you so much. Thanks to this video I was able to repair my dryer myself. Knowing just which screws to remove and how the pieces came off made it relatively simple. All it took in parts was the new tensioner pulley for under $10. Again I say, thanks.
Followed your instructions and my dryer is again working. Thank you very much!
You're welcome!
Thank you soooo much I bought the pulley thru the link it should arrive in 2 days ... thank you so much I had my daughters looking at what I was doing... thay are amazed mom can now fix the dryer... with the help of a good instructor of course.☺️
You are so welcome!
I just did this thanks to your videos. Appreciate you sharing!
Thank you. Your video was so well done and easy to follow. Donation sent. 💯👍🙏
First video I clicked on for my dryer and what a well walked through video! The pulley it was!
Don't see them as much anymore but it used to be constantly. Glad to be of service!
Thank you. Great job with your video. It helped me fix the dryer.
Thanks, this showed me how to open my dryer, as soon as i lifted the top i grabbed the belt and it just pulled right up, it snapped in half.
Thanks man! Helped me fix my dryer today!
Great video ! Very detailed and helpful . Was able to solve and fix my problem right away ! Thanks again !
You are a live saver. Thank you!!!!
Super easy repair thanks to this video.
Thank you for this very informative video. I ended up having the same problem where my pulley broke off.
Awesome thx for the vid this is what was wrong w mine ordered part & will be here soon! Thx again so much for this vid very helpful!!
No problem 👍
Very good explain ur self
I have a samsung gas dryer, 4 years old, DV48H7400. I was having some difficulty removing the lid using the putty knife. It seems I am exerting a lot more force than you did and with no success. Other videos have removing the control unit to lift the lid? Are all samsung lids able to be opened from the front like you demonstrate or is it model specific
Thanks
Island Appliance
I replaced both the pulley and the belt. The pulley had visible damage too it for sure. The belt looked fine but I replaced both anyway. The hardest part was definitely putting the belt back on. Unfortunately, I am still having the same issue. The dryer powers on, when you get to start a drying cycle the light next to drying still blinks. I have the same dryer as the one featured in the video. Is it possible I did not put the belt back on correctly? I've disassembled it twice now to make sure I had the belt on correctly. I even gave it a few turns and all seemed right.
Hi, I have Samsung cloth dryer how to connections 3 wires for 220 volt
I have the Samsung DV42H5000EW/A3 dryer. I was drying clothes during a thunderstorm when the power went out and now the dryer won't start. The control panel lights up but the unit will not turn on. I've read where there is no reset button on these units does the fuse need to be replaced?
I have the same dryer. It powers up but won’t change any settings or start. It just beeps when I hit any button. Any clues? Control panel?
Help!! Dryer was fine, we lost power for 3 days but dryer was not running at the time. When power came back pushed button to start - nothing. Drum belt is on fine, could it be the door switch? Thanks I advance 🤞🏻
Did you ever get the problem fixed? I’m having the same problem
My Samsung dryer display light started dimming untill I couldn’t see it anymore and then it just stopped working all together ?
Question before I disassemble dryer...dryer wont start all I hear is a click sound, would the belt be the reason or a sensor/fuse?
If you get lights and it seems like it will start and it just don’t I would suspect your fuses are good. The idler pulleys on these tend to wear out. You’re belt can either be broken or not when the pulleys go out. This is the most common issue anyways. You may just find a broken belt. Take it apart to make sure before you order the parts.
Thank you. I appreciate your help and quick response.
You’re welcome. Good luck and let me know if you have any other questions!
Finally was able to fix the dryer. Thanks for the vid 👌🏽 and help ✊🏽🙏🏽
@@KingKoopaPurp965 what was the issue? Having a problem with a samsung dryer now and same as u I hear a click but it wont start.
Can someone help me
My Samsung won't turn on is it the fuse
Could be yes.. They are rare to go bad though. I usually replace fuses on the element and the elements them selves. That or you may have a broken belt or idler pulley broke. Take it apart and make sure before you purchase parts. If I had to put money on it I would say you have a broken belt and or idle pulley
What if belt or tensioner isn’t broken. Everybody knows the easy fix
Check voltage on the terminal block. You need 120vac on both live 1 and 2. If that's good most likely you have a bad motor and it needs to be replaced.
I can't believe you did this whole video and didn't include putting the belt on the pulley...
It's in another video link in the description below this video.
@@w.larson34 how dare you speak to me.