GE Dishwasher "H2O" Error (Dishwasher Not Filling) Diagnosis and Repair
Вставка
- Опубліковано 11 кві 2023
- Pressure Switch If you Need It - amzn.to/3KRKYtT
--------------------------------------------------------------------------------------------------------------------------
Call us today with you model number and we will make sure you get the right part
888-655-8569
In most cases we can get you the part the next day if ordered before 4pm central time.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Support the Channel by donating or using the links down below.
Try Amazon Business- amzn.to/3ukXqHe
Try Audilbe Plus Free Trial Here - amzn.to/3yx65te
Amazon Prime 30 day Free Trial- amzn.to/3fd7z4g
Donations are appreciated as well you can donate here - www.paypal.me/Beardedappliance
Stop by our Amazon store to pick up must have tools for appliance repair
www.amazon.com/shop/beardedappliancerepair
----------------------------------------------------------------------------------------------------------------------------------------------------------------
This GE dishwasher has a problem starting. It will not always start like it is supposed to. The washer will fill just for a little bit then shut off. May even have a H2O error. This problem points to the pressure switch on the new Dishwashers. IF there is indeed an issue there You can either replace it or clean it. We clean it in this video and unit works well afterwards. If the issue continues i would recommend replacing it if the cleaning does not work. - Навчання та стиль
As more and more AI generated videos and articles appear I really struggled to find the problems, but a single human video solved it all! Thanks for taking time to make this!
Wow! You described the problem well enough that I tried this and fixed my dishwasher which broke the DAY BEFORE THANKSGIVING! I never would've gotten a technician out until next week . . . usually wouldn't mind hand washing for a while but this helps a lot! Thanks for the clear description and clear instructions!
Holy smokes! I nominate this gentleman for the nobel piece prize. I could not find anything on cafe dishwashers close to how helpful this was. Thank you.
Boom! We we're broken and now up and running. This was exactly what we needed. You're a boss Bearded appliance repair guy
You solved the problem that our appliance repairman could not figure out. Thank you!!!!
The video not only saved me from buying a new Dishwasher but also showed me the easy way of replacing the faulty device. Many many thanks !! When my four year old GE dishwasher started showing the erratic behavior a couple of months ago, I contacted my warranty company (as I had bought extended warranty) and they shipped me new pump and arranged for a repair technician to install it. When I described the behavior to the technician he immediately suspected control board without even looking at the dishwasher and ordered the board. Two different technicians came a week later and installed the new board and pump without touching the pressure switch at all. But the problem remained. So based on their assessment the warranty company told me the machine was unrepairable and refunded me the full purchase price. However, based on my internet search I had suspected all along that the pressure switch was the culprit, so I ordered the new switch and replaced it which took me less than 15 minutes after watching this Video. Problem SOLVED !!!!!! So now I have a dishwasher with new control card, new pump and new pressure switch all thanks to those incompetent technicians who never bothered to check the pressure switch. BTW, the old pressure switch just had a slight gunk on it so it would have worked also after cleaning but the new switch only cost me $20 so I don't mind replacing it.
You fed those idiot technician's family and the scammer warranty company for a day or so so everyone wins...?
Yes!! This saved me a ton of money in repair costs, and I did it myself in 5 minutes. Thank you!!
Hardest part was getting the kick plate off! Someone really tightened a screw beyond tight. Once I got the screws out (using a 1/4” ratchet), everything went smoothly. Dishwasher is running smoothly again! Thanks for sharing your knowledge!
My dishwasher stopped working about 6 weeks ago, this video got me some SERIOUS bonus points with the wife! This was my exact problem!
Many thanks for this spot on video! I repaired our 3-year old GE dishwasher according to your instructions and we are back in business. Little hiccup on account of me not properly assembling back the sensor the first time (one side latch remained unlocked). Quickly identified the problem after it started leaking and corrected easily.
This did the trick when all else failed! I’ve been struggling with my GE dishwasher for the past six months. It’s been a combination of FTD and H2O errors, and that maddening “da-dee, da-dee, da-dee” error beep. I’d replaced the drain pump, cleaned the hoses, and done other things that sometimes helped and sometimes didn’t. The machine stopped running again today and I was close to throwing in the towel, but then I discovered this recently uploaded video. A clogged pressure switch was the culprit, and the fix in this video worked perfectly. Thank you!
Much appreciated, sir. Thanks for your guide. Extra note to those who didn’t see it clearly : pull that electrical plug out *sideways*- not down (as I did)- save yourself some headache
Life saver.just fixed my 4 year old ge in about 5 minutes.i covered up the electrical connection and sprayed out with the high pressure nozzle on sink and now works flawless..4 star review from southern In....
You are a godsend. I spent countless months trying to resolve the alternating ftd, fed, and h2o error codes on my new-ish GE dishwaser (drain pump, disposal, ensuring no kinks in the hoses, checking water pressure, cleaning filter, baking soda and vinegar, new detergent, repositioning the dishwasher, factory reset) and hand washing dishes.
I was about to give up and hire a technician but then came across your video this morning. You easily walked me through the diagnosis and repair process (there was a clog that was undoubtedly causing the issue) and now my dishwasher is running. Hallelujah.
I actually burned through my extended warranty on my ge dealing with this. Techs just kept replacing the sensor.
Thanks for taking the time to make this video.Our dishwasher is working again! These videos where skilled workers show how to fix things or use a tool or solve a problem make the internet worth a million dollars. Your step by step was perfect -- allowing me to become a household hero!
This video saved my dishwasher, and possibly my marriage! Thank you!
Glad to help another marriage lol
You mean save you from hand washing all the dishes so the better half doesn't get pissed off? 😂
I just did it, cleaned it and it works, but now it’s leaking at spot 😢
@@vickicade4931so I’m assuming it’s fixed by now but if it’s not make sure it’s down all the way and push it just a bit passed we’re it’s sideways at a 90 degree angle
God bless you! I fixed my dishwasher in less than 5 minutes. I screamed when I heard the water running!! Thank you soo much!
Great video! Thank you. As one of the viewers pointed out below, the sensor needs to be seated completely (2nd snap) or else there will be a leak.
Thanks!!!
Came back for this comment! Thanks for posting it.
You just made my husband so proud. He's out of town for work, and the dishwasher broke,but thanks to your video, I was able to fix it myself. Thank you so much!!!
You're My Hero. Repairman came new board, inlet pump and drain motor and after all that, i find this video and fix it myself. Yes!
Not all heroes wear capes, some wear a tool belt. Your directions were so easy to follow. Fixed my dishwasher with a screwdriver and a pick - no special tools needed and it was so quick. THANK YOU!!
Thank you! This is just what the doctor ordered. It's a simple repair, and this video explains it all so clearly.
This fixed my dishwasher. Here is a fraction of what I would have had to pay to get someone to come out and fix it.
Fixed mine perfectly. Had to make sure I cleaned the inside of the sensor also. You’re a lifesaver. 🎉
This guy's the freakin man! What a boss. Our pressure switch was totally clogged and now we are up and running. Kudos!
Our 2 yr old dishwasher suddenly stopped working one day last week and this video showed me exactly what to look for and how to fix it. It’s running fine now. Probably saved us a $75 service call! Thank you!!
Had a repair man come out a year ago for this issue and he replaced the part but did not mention that debris can be cleaned out. Instead of dropping more cash for him to come back and found your video. You saved me money and frustration. Thank you sir!
Thank you Sir for sharing this! For anybody reading, be careful disconnecting the wire harness. There is a black tab holding it in. I couldn't see it and accidently tore my wires out. Got it all fixed though, just had to take the connector apart.
I am extremely grateful and happy for the video, very easy to follow, and fixed my problem and my dishwasher is running again. I just wish I found this video before I spent $250 on an appliance repair guy who swapped out my door lock switch and told me that fixed it but it didn't :(
Thank you for the vid. Was able to get my dishwasher working again, although ... It was very challenging to get the sensor out. It took more than just flipping the tab down. I had to use a vise grip. And it too 10 minutes to get it back in because there was a metal shield that prevented complete and easy access. Finally got it all put back together again. No leaks. Yay.
Such a great video! Thank you so much. This was exactly my problem and I’m so thankful I was able to diagnose by watching a few of your GE dishwasher videos and repair it quickly and easily with this tutorial!! The only thing I will recommend to others it have a few beach towels ready. I had more than a little water come out of mine. But it’s fixed and that’s what matters!
That's what happened to me too!!!
I can easily find a way to mess up something with 2 instructions so the fact that I was able to fix my dishwasher with this video had me celebrating! Video saved me money and from having someone come out! This video was easy to follow and understandable.
Thank you!!! This was exactly what mine needed! Mine was giving me the H2O error and stopping randomly. I replaced the fill control valve hoping that was the problem, but it was still doing the same thing, H2O error. This was the issue, badly clogged pressure switch. Awesome and helpful video!
I watched your video and knew what to do. I fixed the H2O error. You nailed it! Thanks
Thanks. Worked for me and ours doesn’t have the H2O alert. But it seemed like a great first attempt. Appreciate the clear video. Saved me a ton on hand washing tonight.
Thank you so much for being so much more thorough than the last video I watched. On my unit, the white part was filled with gunk. So I cleaned that out and it washed the entire load. The next load, I got the H2O error. I'm so glad I came across your video. I didn't know you could, or should, take that part apart. I did, the hole was clogged. I used a toothpick to open the hole and voila! A running dishwasher! Thank you so much!
Thank you!!!! This fixed my issue. After calls / chats with GE helpline that were anything but helpful this simple repair using a Swiss Army knife has my machine working again.
Hey, man! You nailed it for me. Did it exactly and as simply as you explained. I couldn't find my awls so I ussed a snapped toothpick to get the gunk out.
The hardest part for me was getting the dang harness off as the wiring wasn't nearly long as it was in your vid.
Much thanks for your very intuitive video, sir. KUDOS!!
You are amazing and saved Thanksgiving! Dishwasher started acting up days before hosting, thought I would be up all night washing dishes. THANK YOU!!
Thanks so much for your video. Solved my problem 100% and saved a call to the appliance repair guy. Cheers!
Man you saved me several hundred dollars by posting this video, and I really do appreciate it. Nobody in my area wants to work on dishwashers, and I had no idea what was wrong with it of course till I found this, and was ready to put it on the street.
This video was a great place to start. Turns out a mouse chewed one of my wires; I was able to replace the DC cable. When reassembling, I left one of the washers out and my unit was leaking, but your video was a good place to remind me where the washer goes. 🎉 4:58
Thank you so much for posting this! I was on the verge of ordering a new water valve, but found this. 5 minutes and the diswhasher is back up and operating. There was no visible gunk on my sensor, but a rinse and wipe off did it!
My dishwasher was having this issue and your instructions worked like a charm in fixing it. Thanks so much!
Thank you SO much! I live in Phoenix and have extremely hard water, and this little sensor was so full of build up and crud… no wonder my washer wouldn’t run!
Saved my bacon! I had already replaced the full control valve and it kept doing it. Was about to buy a new dishwasher. Should have known it was a sensor! Was full of junk. THANKS!
Thank you SO much! We couldn't find anything on any GE site or in the manual for trouble shooting. This was exactly what we needed. The video was well done and directions very clear. Thank you, sir! Take good care
Thanks! First I assumed that it was a clog so I made sure the air gap was clear and checked drain inside. still not working. Was about to give up then remembered seeing the H20 error message. Found your video and was up and running in about 15 minutes. You saved the day. Thanks for everything.
Worked for me. Thanks!
A few pointers that might be helpful:
1) Take a rag and soak up as much water as you can inside the dishwasher by the filter or water will pour onto the floor.
2) There's a small tab holding the wire harness in place. Make sure you're pushing that down when removing the wire.
3) After cleaning, make sure the pressure switch is perfectly aligned in the plastic housing. One of the ends can be off by tiny amount and you may not notice unless you look closely.
4) If you've finished and the dishwasher is still not getting water, you may not have cleaned it well enough! I had to clean mine twice before it worked.
This is the answer! A year before this video I had same issue, had a few repair folks out, replaced boards, pumps, etc. Was able to get replacement dishwasher after emailing GE appliances CEO directly. New dishwasher had same issue. Finally got a repairman that knew this fix. I now clean it out every few months. Sometimes you will get PRS (pressure sensor, but looks like Pr5) error when reattaching sensor...just unplug it, make sure both plug and receptacle are dry/clean, and re-plug. That cleared the error for me.
Your advice was spot on; saved me a repair call. Thanks!
Broooo!!!! Thank you so much for posting this easy repair. 10 min job and back up and running. Much love homie, HAGW!!
THANK YOU SO MUCH!! Our 3 yr old GE dishwasher has been sitting unused for weeks because we couldn’t figure out why it wouldn’t complete a cycle. We cleared the gunk exactly as you described and it’s up and running again. My children thank you, too; they don’t like handwashing the dishes! 😂
Thank you! Your video gave me the answer. Cleaned it and BAM! We're in business! Thank you for posting.
I wish I could like this more than once. This video was so thorough and helped me solve my H2O error. THANK YOU!
Thank you so much for saving me a repair call! Worked great and was easy to do!
This is my same model. This worked! This needs to be the #1 video for this. Thanks!
Thanks for this video! This happened to mine today, this worked! Wasn’t really gunk in hole but just the tiniest bit in white part. Nothing much, but that was it! It worked
Glad it helped!
This was exactly what I needed! You saved me from having to deal with the landlord and plumber again. Thank you
THANK YOU!!!! Fixed my issue. 5-10 minutes will save you the cost of a repair call or replacement.
Thank You!! Ours was clogged with limescale / debris, was a quick 15 min repair thanks to this video.
THANK YOU! I had replaced my inlet valve due to that being a known issue and culprit, but it only worked for one wash cycle and then went back to the constant "drain loop". Found your video, took out the sensor, cleaned out all the gross stuff, popped it back in, and voila! Just a piece of advice to those trying this, make sure the white and black piece are snapped down TIGHT otherwise it will leak a lot.
Thank you! This was exactly what the problem was. I really appreciate it. Thank you for taking the time to make this video. Have a great day!
The GE manual says if no water is coming out to check the float switch. Thank you for making this video! The GE dishwasher model "gdt665ssn3ss" actually has a pressure switch! The manual is wrong. I cleaned the pressure switch hole and the dishwasher works perfect now.
YES YES YES. My dishwasher is back up and running now! Thank you!
Thank you so much for this video. Fixed my machine in 5 minutes. Gunk had gotten into the switch and was forcing it open. Explains why the machine would drain, and drain, and drain, and then turn off. It thought it wasn't draining.
Thanks! I finally fixed my dishwasher thanks to this!
This worked like a charm and took no more than 20 mins. Thank you!
I am so grateful for coming across your video! It was a 10 minute fix. THANK YOU SOOOOOO MUCH!!!!!!!!!!!!
Awesome. Pressure switch cleaned and washer working again! Thanks.
Great video-I’m not super handy (but I’m always trying too learn) and this was easy to follow, thorough & fixed the issue! Thank you!
Thank you for the great video! You are the only person who answered this problem correctly. I called GE for advice and was advised to pay 115 for a service call. Thank again!
THANK YOU!!! Both parts had gunk in them. i noticed the filter is right next to this part. Perhaps if the filter is cleaned frequently the issue may not occur. I'd had the dishwasher 15 months when getting the H2O error andI was certainly not happy when I thought I'd need to purchase parts. This fix took only minutes. I used a metal cake tester to clean out the hole.
Thank you for taking the time to make this very helpful video, I am a maintenance technician for an apartment community and having the knowledge to fix an appliance versus replacing it is invaluable -
I was working on the exact type that you were working on, and I will be buying a pressure switch , because even though I cleaned mine out , it still won’t fill - but I am positive, This will be the fix
The dishwasher is only two years old, thanks again for all all your videos, and the time you take to share them 🏁😎
Thank you! I was able to follow your directions and fix my dishwasher. The pressure switch was clogged exactly as you described.
i never would have figgerd this out. thanks a million
Great video, very quick and helpful!! Remember when reconnecting the sensor to the white tube piece after cleaning to get both sides to click on tight, mine wasn’t tight enough and I got a lot of water leaking when I thought it was fixed 😂😂 thanks again man saved my dishwasher!
Hopefully you didn't walk away after starting it. Love how this guy said, "Check and recheck!". A sign of a very good technician.
Great video. I noticed a slight leak but am unable to fix the leak it. any tips on how to tighten it so that it doesn't leak?
@LeonePhelps Thank you!!!! You saved my sanity… that which remains! Haha. So glad you posted this! Cheers!
This saved my bacon. I also didn't realize at first that the black piece wasn't tight with the white. Thanks for the info!
I have problem too. I started the dishwasher and there is a slight drip.
Amazing! Easy to follow video and found a very gunked up sensor in my dishwasher. Simple clean up and back up and running.
Thanks ! This fixed my 3 year old GE Cafe 2 days before easter, mine was totally full of gunk !
What a cool repair! Thanks, it fixed my 2 yr old GE just like that and boy was that thing gross!
Thank you very much. This worked for my 2 year old Hotpoint, Model HDF330PGR0WW. It Looked exactly same as the GE in your video. I searched for the part number that was on the sensor that I removed. It was a listed a GE part. I bought it and it worked perfectly.
This was my exact problem and your video helped me repair it! Thank you!
Thank you, I was able to fix this myself. Couldn't unplug the switch but I was able to clear the clog. Job took about 15min. Washer now working again.
We followed your instructions and it WORKED!!!!! Thank you so much for making this video and putting it out there.
Tip on pressure relief valve was 100% spot on, GE Cafe Dishwasher was not filling with water. Thanks
This fixed it exactly - thanks so much! It wasn't giving me an error code for the first ~7 attempts to run, but it did eventually. It would just shut off anywhere between 1-15 minutes into the cleaning. Also - quite a bit of water came out of mine; I recommend having several towels ready just in case. I was on vacation for 2 weeks and am guessing the gunk dried, closing it off.
Thank you. I followed your video and fixed my GE dishwasher.
Life saver. My valve was clogged up just like in the video. Cleaned it out and worked like a charm.
Hmm mine leaked right after i changed it
Great video! This fixed our dishwasher. On ours we also had build on the white connector too and had to clean that out too. Would not have foubd it without this video! Thank you!
Thank you for this tip. Pressure switch was full of goo. Back up and running in no time.
Great video! Exactly the issue with my machine! Thanks for helping out so many people with this!
Thank You so much. I just saved a lot of money because of your video. It took me 20 mins to get it up and working .. Definitely subscribing and telling all my people about your channel!
Thank you! Thank you! OMG I just saved myself a $100 Repair bill. This was so on point! I owe you! I do wish I had read the comments about having towels on the ready. Ugh, the water traveled fast. It's all good. I learned that I can do it.
Outstanding! Fixed mine and saved some serious money. Thank you!
Spot on. There was more water in mine. And if I just clean out the trap more often then not. Thanks again buddy!
God bless you and thanks again that’s exactly what was wrong with my dishwasher. I really appreciate you for this like many others. I owe you one. Let me know if you’re ever in Vermilion Ohio I’ll take you out to eat.
Thank you! Your video was exactly like my dishwasher. Much appreciated!
Thank you! Just needed to clean it out, then it worked like normal.
After troubleshooting my GE GDT665SGNWW I came to the conclusion it has to be a sensor of some sort. I was not receiving the H20 error, the pump would drain the dishwasher, the dishwasher would fill, the element would heat. I seen this behavior on every setting but sporadically the door light would turn off and the cycle would fail. This video pointed me directly to the problem. Good video and thank you for sharing this knowledge!
Going to try this now I have a very similar GE washer that is giving me the H2O code. Very good video and I really appreciated the camera placement so we could see exactly what you saw! 👍