My one wheel has not worked in 2 months. I let it sit in the garage through winter... Thinking it was the battery, searched how to install a new one. There was a place right down the street from me that happened to sell after market batteries. After watching this, I went there to go buy a battery. There was a gentleman that helped me that looked familiar. Not thinking anything of it. I went home to install the battery. I'm watching the video and Bara the guy in the video is the one who helped me.....wow. Absolutely incredible. Awesome staff and sweet work shop. I'm up and running with a higher mileage range. Thank you for the full circle customer service and quality product!! Will recommend!
Wow this is a really impressive kit with pretty simple installation. Nice job. What if you offered a boardbank housing that we could drop our stock pint battery into? Then we would be able to stop and charge and our perfectly good pint battery wouldn't be wasted. 12 miles on the quart battery, stop for a break and get another 7 miles.
Hi guys! Love the battery, got it around 4 months ago and have gotten up to 20km of range with aggressive driving. One thing I could recommend you to add to the video or maybe change about the battery pack is the free space on the side of the battery pack where the wires run. My board wouldn't turn on lately so I investigated and figured out that due to this slight slack, the battery pack actually pulled enough on the xt60 cable coming from the controller to disconnect it completely. This is partially my fault because I frequently put the board down on its non-handle side, and in that position the battery weight hangs on those cables, me dunking the board against the pavement just made it worse. Everything works perfectly fine now that I've found the issue, and I filled out that empty space with a cut to size eraser but maybe the pack could come with some foam padding with adhesive on that particular side? Worst fear is the cable disconnecting mid-ride
This is a great video, but many steps are made to look very easy. at 2:45 'they might be a little tight' is a massive understatement. I don't have a high-power drill or the bit needed, so I ordered a wrench kit with the bit. Bit was fine, wrench underpowered, so I used a portable powered screwdriver - no dice. Used a higher powered rechargeable drill. Nothing. Finally went to a workshop that had a real drill. Meanwhile my disassembled Pint sat for weeks.
@@stacyneri9463yea those are absolutely insane, btw when you removed em did u notice if they had loctite? If so what colour. Thanks, I can try to actually melt the loctite so it would be easier to get out
Chi quart review. Put one of these in last month. Near on double my range. Board feels the same accelerating and braking. Tail is heavier of course and simple stop can feel clunky/abrupt because of the increased weight...or I just need to get used to it. Battery fit is super snug. Didn't need to cut anything, Chi please make the balance cables a whisker longer...mine just reached. Recommended product. Using the app/diagnostics/voltage to monitor battery is no problem. Light bar will not read correct and neither will the battery indicator in the app...must just read voltage in apps diagnostics. If you order a battery also order online somewhere the ipr20 bit as it's not likely to be at your local tool/hardware.
This is the review I should have read before a three hour failed journey to five hardware stores and four auto supply stores. No joke- save the grief and order the ipr 20 security bit off amazon
2 questions 1. Can you have the ow app open the whole duration of your ride or will it interfere with it? 2. Will the battery light bar on the pint tell you a good reading on how much battery you have left?
Battery light bar and onewheel app batter % are no longer accurate with this modification. You have to estimate the % left by looking at the voltage remaining on the battery in the OW app. Onewheel app works fine for the most part, but in my experience, ride recording unfortunately doesn't work correctly for unclear reasons.
When we got to the battery it required a specific drill bit to open it. We couldn’t find that but anywhere so we ended up voiding the ow warranty for nothing.
At $450 plus the pint it’s almost like buying the XR. I like the product and the fact that it keeps the stock look on the pint!! I guess I wish it was on the $300 range..
I bought a pint with quart battery upgrade used for my fellow one-wheeler. Last night was my first range test, flat-ground on the Pacific setting I got just over 12 miles before the Pint died Is that about everage?
Imo the adavntage of the one wheel is the ability to go off road or over more divets in the road.. skateboard is less money and faster i dont have either but have been researching and watching videos for a while im stuck more between an euc and a one wheel... or just getting another motor cycle lol
@@bencrystalofficial I trimmed mine as well, but I melted the ends and pushed them together. Others recommended rtv silicone which I ordered off amazon
Is there a newer install video on here somewhere for the updated redesign chi battery systems that they just came out with where you leave your housing untouched with only one small cut to the BMS cover??? I would love to see it! Also what app do you use to track the range and battery life for this upgraded battery? :)
The new mods are much easier than this, I made a reddit post that details the new mods and install in general. www.reddit.com/r/onewheel/comments/n7jm8t/quart_battery_install_experience/
The new mods don’t fit. They are too thick and you will have a hell of a time trying to close it, especially if you’re trying to keep the o-ring in place
@@blakereed7658 I just did two replacements with their new mod, I did not find that it was that hard to close it. Can you explain why you had difficulty with it?
@@ridefree530 To make it fit without removing the housing they squished the cells closer together so that every other row of cells is almost a quarter inch higher.. something like o°o°o°o° instead of oooooooo.
@@blakereed7658 Oh ok. Yea I installed two of them recently, it was a tight fit for the cover but I didn't think it was that hard. All I had to do was tighten the little machine screws in one by one to put the cover back on.
My friend has been having issues with his Quart battery for a while now. His board Captain Morgan’d him yesterday at only 6 (5.9 but close enough) miles and I personally charged it for him to 100% with the home charger to really top it off! Not impressed tbh. We even turned the board off and back on to cycle it through and it still crapped out.
What kind of bit/screw driver for the plastic covering the chip next to the battery? You used a small screw driver but not sure if it was Phillips or something- Those screws looked stripped before I even tried
I have a question, does the Onewheel app always say 100 percent and I’ll have to go off of a voltage chart? And what will that light bar say as well? If you guys could respond that would be great!
This is badass! I wanna do the update but man tell me the app still reads out your battery level? If not I’d need a voltage readout to know what the battery percentage is and that seems like a huge pain in the arse 🤷♂️ like to do this tho the added range would sure be nice!
I don't own a one wheel will be getting one in the coming weeks, I did decide on the pint as the one I wanted to get. My question is what is the the benefits of this mod???
Derek Williams the reason I ask is there is a guy near me selling a pint that has 20 miles on it, and he also has a quart battery that he hasn’t installed and I’m wondering how to tell if that pint is compatible with the battery. So I’m wondering how to tell which hardware revision a specific pint is.
I did it, pretty simple although I am an idiot and didn;t have the approirate bits (thought I did). Watch thewhole video before purchasing and note all the bits required. They are availabe via amazon or at a HomeDepot
I was gonna buy all the Bits Yesterday. * T8 and T20 T30 very easy to Find. But the 20 IPR 5 Point Security bits is so Hard to Find. Please give us The Link. I need to Change My Battery already
I'd love some info on whether the Onewheel app works with the battery. I always want to know how much range I have! Does the light bar reflect the battery percentage with this mod? UK rider here, looking to upgrade!
Just got rid of the Onewheel and bought a Veteran Sherman. OMFG its the most amazing machine ever created lol and probably the closest thing to flying without leaving the ground!!
He really glosses over the bit that you need to take apart the battery housing- it's called a 5 point TORX bit or TORX plus IPR. It is not easy to find in local hardware stores and likely you will have to buy this bit online just FYI for anyone doing this install. The size you need is a T20.
Yes very true, a special purchase - five point tamper proof torx. Also have stripped out two torx wrenches trying to take out the wheel bolts on the side. Any advice for such tightly fitted bolts?
Update, also bought high strength T30 drill bolts, drill failed to supply enough strength. Used a wrench in the end with maximum leverage on the bit. Clearly the loctite on the bolt was a bit of an issue. Bolts are a bit shredded too after the experience. So, prepare for it.
Yes the wheel bolts on my pint were quite tight as well and I almost stripped the bolts using a drill. I would do what you did and use something to get leverage like a ratchet or fitting a wrench to the end of the bit. I didn’t have any issues with my bits breaking they must have been stronger than the bolts since the bolts started to strip instead. An impact driver could be used in the worst case if you can’t get any movement with the use of leverage.
@@Spatial_Computer I don't know what kit you are talking about, but this does highlight the need to order the special bits mentioned above ahead of time to complete this project.
Only thing holding me back from the onewheel is the specs. Great speed and all terrain but terrible range in general. My $150 electric board does 7 miles and goes 16mph. For the price that's already better. Build wise the onewheel wins. I guess I just hope they announce something new soon with a decent price
lol,The new hardware and software updates makes the new one wheels/parts non-interchangable- Change the battery and the one wheel won't turn on.--One Wheel breaks down you can't get parts,you have to send it to One Wheel factory in California.==pay your own shipping cost==High prices for the parts==Wait 3-6 months to get it BACK.
It’s unfortunate but…well it makes sense. If everyone went changing out the stock battery, that adds a lot of liability into Onewheels hands that they can’t control. If one of the batteries catches fire, that’s going to be shown as their fault. So it’s in their best interest to try and prevent it unfortunately.
your life will change when you can get credit cards. dont use them for dumb stuff. if you need some 450 battery boom np you have months to pay it off. i like the apple card but others have deals on apr.
@@maneeoocho350 I have a pint. It’s great but yes I wouldn’t buy a 450 just for the extra but when my stock battery looses its potential I would get the 450 as a replacement.
Batteries are expensive ... very expensive. You may be used to buying Chinese stuff that does not last or give the performance of a real product, but here we are talking about a very powerful and quality battery that should not explode or catch fire! In the world of hobbies there are indeed $ 30 3s lipo batteries that perform well, but generally they inflate quickly, catch fire! I even have an acquaintance, his garage caught fire because of this kind of shitty battery.
Very expensive battery. Exactly what makes this so expensive??. .By the way, just add another couple of hundred dollars more to the Pint price and you get yourself an XR.
@@RemingtonTerritory I am one with onewheel, onewheel is one with me. I am calm. I am too busy riding, no time to put something together. I will buy the battery when my one pint battery is degraded. I think it is a better deal than getting a new one from Onewheel.
I was totally misled by this. You make it seem very simple when it is not. The security drillbit can not be bought at any traditional stores. I have gone to 3 different ones today that all did not have them. You should stress this more rather than mislead everyone. Now my board is in pieces and I have to wait a week for them to ship to me. Kind of ridiculous.
@@tlcraig22 www.amazon.com/gp/product/B07TN64T87/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 these bits worked great for me after 2 faulty bits i tried.
You actually disassembled the board without having the necessary equipment at first? Did you not watch the entire video before the installation? Don't jump the gun and next time do some more third party research before your tear apart your $1k+ toy. What a loser.
![Quart by ChiBatterySystems: Installation Guide [UPDATED 2022]](http://i.ytimg.com/vi/0ezL7lf9WIg/mqdefault.jpg)
![Quart by ChiBatterySystems: Installation Guide [UPDATED 2022]](/img/tr.png)
My one wheel has not worked in 2 months. I let it sit in the garage through winter... Thinking it was the battery, searched how to install a new one. There was a place right down the street from me that happened to sell after market batteries. After watching this, I went there to go buy a battery. There was a gentleman that helped me that looked familiar. Not thinking anything of it. I went home to install the battery. I'm watching the video and Bara the guy in the video is the one who helped me.....wow. Absolutely incredible. Awesome staff and sweet work shop. I'm up and running with a higher mileage range. Thank you for the full circle customer service and quality product!! Will recommend!
Wow this is a really impressive kit with pretty simple installation. Nice job.
What if you offered a boardbank housing that we could drop our stock pint battery into? Then we would be able to stop and charge and our perfectly good pint battery wouldn't be wasted. 12 miles on the quart battery, stop for a break and get another 7 miles.
This man is a genius.
What does this chibattery do the onehwheel
Hello, could you please do a how-to video of the ChiGauge Display for the Pint
Hi guys! Love the battery, got it around 4 months ago and have gotten up to 20km of range with aggressive driving. One thing I could recommend you to add to the video or maybe change about the battery pack is the free space on the side of the battery pack where the wires run. My board wouldn't turn on lately so I investigated and figured out that due to this slight slack, the battery pack actually pulled enough on the xt60 cable coming from the controller to disconnect it completely. This is partially my fault because I frequently put the board down on its non-handle side, and in that position the battery weight hangs on those cables, me dunking the board against the pavement just made it worse.
Everything works perfectly fine now that I've found the issue, and I filled out that empty space with a cut to size eraser but maybe the pack could come with some foam padding with adhesive on that particular side? Worst fear is the cable disconnecting mid-ride
I’ve just started researching the quartz battery for the pint. This was great. Thanks
Love your work man ! Continue to make our love better
This is a great video, but many steps are made to look very easy. at 2:45 'they might be a little tight' is a massive understatement. I don't have a high-power drill or the bit needed, so I ordered a wrench kit with the bit. Bit was fine, wrench underpowered, so I used a portable powered screwdriver - no dice. Used a higher powered rechargeable drill. Nothing. Finally went to a workshop that had a real drill. Meanwhile my disassembled Pint sat for weeks.
agree, cannot remove those 2 damn T30 screws
@@stacyneri9463yea those are absolutely insane, btw when you removed em did u notice if they had loctite? If so what colour. Thanks, I can try to actually melt the loctite so it would be easier to get out
Thank you! This video was super helpful in helping me with my pint.
Man this mod is at the top of my bucket list to get. I just can't ever seen to fork out the money for it. Great product guys!! Much love
It’s only like $265 right now for cyber Monday sale. I felt the same way and just placed my order.
Chi quart review.
Put one of these in last month. Near on double my range. Board feels the same accelerating and braking. Tail is heavier of course and simple stop can feel clunky/abrupt because of the increased weight...or I just need to get used to it. Battery fit is super snug. Didn't need to cut anything, Chi please make the balance cables a whisker longer...mine just reached. Recommended product. Using the app/diagnostics/voltage to monitor battery is no problem. Light bar will not read correct and neither will the battery indicator in the app...must just read voltage in apps diagnostics. If you order a battery also order online somewhere the ipr20 bit as it's not likely to be at your local tool/hardware.
This is the review I should have read before a three hour failed journey to five hardware stores and four auto supply stores. No joke- save the grief and order the ipr 20 security bit off amazon
2 questions
1. Can you have the ow app open the whole duration of your ride or will it interfere with it?
2. Will the battery light bar on the pint tell you a good reading on how much battery you have left?
Battery light bar and onewheel app batter % are no longer accurate with this modification. You have to estimate the % left by looking at the voltage remaining on the battery in the OW app. Onewheel app works fine for the most part, but in my experience, ride recording unfortunately doesn't work correctly for unclear reasons.
what a well done video...the instructions were very thorough and concise...
Minus where to cut on a few things😷
🤣 ”don’t scratch your rails” ... never 🤣
Please consider a updated video on up grading a 4212 XR.
🖖
When we got to the battery it required a specific drill bit to open it. We couldn’t find that but anywhere so we ended up voiding the ow warranty for nothing.
I like this video because it's going make FM mad!! :D
At $450 plus the pint it’s almost like buying the XR. I like the product and the fact that it keeps the stock look on the pint!! I guess I wish it was on the $300 range..
They have a sale right now for $299.. plus you got to buy the $10 5pt security bit.
It’s 265 right now
Thank you! Where can I buy the battery?
Thanks for the video. Have you guys tested what is the impact on the board's water resistance ?
If tighten with the gasket its the exact same
Whats the difference between a T20 and a T20 IPR?
What does this upgrade do? What is the new range? ML
the new range is 12-15 miles
Is there a way to add a voltage meter display to watch the board's battery level?
Probably not without soldering
It has a display by your foot built in
@@kylemark4536 Just ordered. Is there a link to install the volt meter?
Bara is amazing. Love his work. Bravo
how long do you need it to let it sit for when shipped and can you still use the app.
I cannot find the 20IPR security bit st lowes or anywhere?? Any help on this would be appreciated
I bought a pint with quart battery upgrade used for my fellow one-wheeler.
Last night was my first range test, flat-ground on the Pacific setting I got just over 12 miles before the Pint died
Is that about everage?
I've been going back and forth on whether to get a skateboard or a one wheel. What is the big advantage of the one wheel over an electric skateboard?
Imo the adavntage of the one wheel is the ability to go off road or over more divets in the road.. skateboard is less money and faster i dont have either but have been researching and watching videos for a while im stuck more between an euc and a one wheel... or just getting another motor cycle lol
Definitely able to go on almost all terrains. I think it’s just better. That’s just me tho
How many more miles does it add on average.
Website says: "12-15 mile range estimate based off 200 lb rider in pacific riding mode in ideal conditions"
I have a pint battery that reads shorted on the connector but no obvious heat damage or swelling on the pack. What couod be wrong here?
My O ring somehow doesn’t fit in anymore... any tips while I’m mid construction?
Just happened to me. Seems like it expanded due to the hot weather here in Vegas. Looks like I'll have to go without it
I’d at least put a bead of silicone in there
@@ryleyisakson6445 I ended up snipping just under a centimeter off and filled the gap with a little gorilla glue, the rest sunk in nicely!
@@bencrystalofficial I trimmed mine as well, but I melted the ends and pushed them together. Others recommended rtv silicone which I ordered off amazon
Is there a newer install video on here somewhere for the updated redesign chi battery systems that they just came out with where you leave your housing untouched with only one small cut to the BMS cover??? I would love to see it! Also what app do you use to track the range and battery life for this upgraded battery? :)
The new mods are much easier than this, I made a reddit post that details the new mods and install in general.
www.reddit.com/r/onewheel/comments/n7jm8t/quart_battery_install_experience/
The new mods don’t fit. They are too thick and you will have a hell of a time trying to close it, especially if you’re trying to keep the o-ring in place
@@blakereed7658 I just did two replacements with their new mod, I did not find that it was that hard to close it. Can you explain why you had difficulty with it?
@@ridefree530 To make it fit without removing the housing they squished the cells closer together so that every other row of cells is almost a quarter inch higher.. something like o°o°o°o° instead of oooooooo.
@@blakereed7658 Oh ok. Yea I installed two of them recently, it was a tight fit for the cover but I didn't think it was that hard. All I had to do was tighten the little machine screws in one by one to put the cover back on.
Can you do this for a pint x
Bought the T20 and T30 bits in the video but none of them work? Or am I using these wrong can someone help?
what diameter for that wheels ?
pretty looks good
My friend has been having issues with his Quart battery for a while now. His board Captain Morgan’d him yesterday at only 6 (5.9 but close enough) miles and I personally charged it for him to 100% with the home charger to really top it off!
Not impressed tbh. We even turned the board off and back on to cycle it through and it still crapped out.
Does this work for the pint X ? Or will it get bricked like the GT if the battery is disconnected?
This gets the same range as the pint x, so why would you do it? And I believe the hardware wouldn’t allow you either way
Does this work for a pint x too?
how much more run time are you able to get , with the new battery?
What kind of bit/screw driver for the plastic covering the chip next to the battery? You used a small screw driver but not sure if it was Phillips or something- Those screws looked stripped before I even tried
Ahhh- its the t8 but specifically the 6 star for this one. So need to buy both those sets
Good to know! Wish they'd said as much at the outset. Third time I'll be reassembling due to the wrong bit.
Hey will this battery work with my 2021 xr?
Will the Pint Ultracharger work fine to charge this battery? Thanks
Is that tire much louder then stock tire?
Will you guys offer an option with Panasonic cells?
I have a question, does the Onewheel app always say 100 percent and I’ll have to go off of a voltage chart? And what will that light bar say as well? If you guys could respond that would be great!
I’m concerned that no one is answer this or a previous comment that has asked this question.
@@shableep yeah
If you get a chance to open up the original battery pack. Can you let me know what the stock spec is in the 18650 cell Mah and discharge rate
Hi, will my stock charger still work if I install the battery mod in my pint?
Very Nice Video
Will you guys be making a higher aH battery for the pint?
Is there any way to actually disconnect the wire going from the battery to the controller?
What are the specs on this battery? Especially the mAh?
This is badass! I wanna do the update but man tell me the app still reads out your battery level? If not I’d need a voltage readout to know what the battery percentage is and that seems like a huge pain in the arse 🤷♂️ like to do this tho the added range would sure be nice!
They sell a voltage meter you install on the board as well its like $30 extra.
How much more range do you get with the new battery?
"12-15 mile range estimate based off 200 lb rider in pacific riding mode in ideal conditions"
Hi does the chi guage come with the battery or it extra. I can't find it on the site.
I don't own a one wheel will be getting one in the coming weeks, I did decide on the pint as the one I wanted to get. My question is what is the the benefits of this mod???
Extends the range x2
What happens if the battery is disconnected in the wrong order?
Does this work for all Onewheel Pint?
its these people who read all the terms and conditions and then press no
Check your version of your pint! Bought a quart only to find that it was not compatible because my pint is too new... So bummed.
How can you tell if a pint is too new?
@@BullyMaguire4ever I would email the company and ask them before buying the battery
Derek Williams the reason I ask is there is a guy near me selling a pint that has 20 miles on it, and he also has a quart battery that he hasn’t installed and I’m wondering how to tell if that pint is compatible with the battery. So I’m wondering how to tell which hardware revision a specific pint is.
@@BullyMaguire4ever just buy the pint then.
Sorry, not much help
I did it, pretty simple although I am an idiot and didn;t have the approirate bits (thought I did). Watch thewhole video before purchasing and note all the bits required. They are availabe via amazon or at a HomeDepot
Can you Link us the 20 IPR Security Bits from Ebay Please.
I'm at My LocaL Homedepot but I cant find it. Thanks
I second this! I can’t find it. It’s not a Torx tamper proof T20 and folks look at me like I’m crazy when I’ve tried to find it.
I was gonna buy all the Bits Yesterday.
* T8 and T20 T30 very easy to Find. But the 20 IPR 5 Point Security bits is so Hard to Find.
Please give us The Link. I need to Change My Battery already
@@norbelsemaj3870 u can get them at harbor freight tools
I bought this little set for $10 and it was what I needed.
www.amazon.com/Protorq-5-Point-Tamper-Proof-Security-Pieces/dp/B07TN64T87
@@norbelsemaj3870 are the only ones i need t8 t20 t30 and t20 sec bits?
What tire is that?
when i charge my one wheel with the mod when I hit 100% does that mean its acc 100% with the mod?
i do not think so. charge it until abt 61-63 volts
So is there a bms in the battery pack.. or is it just cells?! You use the original BMS?
How did you get the all terrain wheel? Is it better than the original pint wheel?
It’s better in all-terrain conditions, and will have a long mileage life. You will loose mileage though.
@@loganmumma4506 as in mileage range per trip?
@@duderilreez correct.
hey your homepage says "ALL NEW QUARTS SHIPPING REQUIRE NO HOUSING MODS" so I don't have to cut the plastic?
FYI I got mine today and it is too thick to properly close. I’d ask them if they fixed the issue before you order
Is that an aftermarket wheel? If so, which one?
Hoosier craft and ride sells them for $90
I'd love some info on whether the Onewheel app works with the battery. I always want to know how much range I have! Does the light bar reflect the battery percentage with this mod?
UK rider here, looking to upgrade!
nope, youll get false reading
Where is the quart battery??? Link no longer available...
haw about app ? range and charge stats?
What does the battery upgrade do? Do you have specs/stats?
everything on their website
@@jakevoe Do you have a link? The one in the video is 404.
Where did you get that treadwheel?
It’s the Hoosier treaded tire. Craft & Ride sells them:
craftandride.com/products/hoosier-treaded-tire-for-onewheel-pint
@@nickford1554 Thanks
My battery wont fit. Its seems to be taller than the original.
What's the range with this new battery you installed
Watching 👀
Website says: "12-15 mile range estimate based off 200 lb rider in pacific riding mode in ideal conditions"
My bms is fucked how can I replace it? I just got my quart and it doesn't charge
Seems like the chi website is no longer active 😢
Just got rid of the Onewheel and bought a Veteran Sherman. OMFG its the most amazing machine ever created lol and probably the closest thing to flying without leaving the ground!!
He really glosses over the bit that you need to take apart the battery housing- it's called a 5 point TORX bit or TORX plus IPR. It is not easy to find in local hardware stores and likely you will have to buy this bit online just FYI for anyone doing this install. The size you need is a T20.
Yes very true, a special purchase - five point tamper proof torx. Also have stripped out two torx wrenches trying to take out the wheel bolts on the side. Any advice for such tightly fitted bolts?
Update, also bought high strength T30 drill bolts, drill failed to supply enough strength. Used a wrench in the end with maximum leverage on the bit. Clearly the loctite on the bolt was a bit of an issue. Bolts are a bit shredded too after the experience. So, prepare for it.
Yes the wheel bolts on my pint were quite tight as well and I almost stripped the bolts using a drill. I would do what you did and use something to get leverage like a ratchet or fitting a wrench to the end of the bit. I didn’t have any issues with my bits breaking they must have been stronger than the bolts since the bolts started to strip instead. An impact driver could be used in the worst case if you can’t get any movement with the use of leverage.
I bought the kit off Amazon and the tamper resistant T-20 not labeled IPR did not fit the housing screws.
@@Spatial_Computer I don't know what kit you are talking about, but this does highlight the need to order the special bits mentioned above ahead of time to complete this project.
Didn't know John Snow had electrical experience
Disclaimer the pint now has 6 point screws so the bits in the description don't work if you are a buyer in 2022
They make it way harder to remove the little battery connectors now fyi
I thought a chip was needed to complete the replacement?
🔥🔥🔥
What way the new range
"12-15 mile range estimate based off 200 lb rider in pacific riding mode in ideal conditions"
@@jeppesloth9910 why thank you
Like the video but when started saying how to find out your range, I was like well crap I just want it to show on the ow app
Only on the XR I believe
I have NO IDEA what the BENEFIT of this battery is...can you talk about that?
Only thing holding me back from the onewheel is the specs. Great speed and all terrain but terrible range in general. My $150 electric board does 7 miles and goes 16mph. For the price that's already better. Build wise the onewheel wins. I guess I just hope they announce something new soon with a decent price
lol,The new hardware and software updates makes the new one wheels/parts non-interchangable- Change the battery and the one wheel won't turn on.--One Wheel breaks down you can't get parts,you have to send it to One Wheel factory in California.==pay your own shipping cost==High prices for the parts==Wait 3-6 months to get it BACK.
It’s unfortunate but…well it makes sense. If everyone went changing out the stock battery, that adds a lot of liability into Onewheels hands that they can’t control. If one of the batteries catches fire, that’s going to be shown as their fault. So it’s in their best interest to try and prevent it unfortunately.
You have linked to the wrong security bit!? those security bits have 6 points not 5.
Sorry, you were right. Edited.
🤘🏾🤘🏾👍🏾
Ok but what’s the difference??
At 5 minutes, it'd be helpful to know what size you're using to "handscrew*
T8 bit
never use a screw gun fore delicate work boys & girls
Whatever you do, don't buy the Quart S battery, it does not fit and Chi will tell you to take a hike, if you ask them for help.
U
Waaaant
$450 for the battery? Your kidding me right? Lol
your life will change when you can get credit cards. dont use them for dumb stuff. if you need some 450 battery boom np you have months to pay it off. i like the apple card but others have deals on apr.
@@clheppermann I rather buy the XR then buy a battery for a pint lol
@@maneeoocho350 I have a pint. It’s great but yes I wouldn’t buy a 450 just for the extra but when my stock battery looses its potential I would get the 450 as a replacement.
Batteries are expensive ... very expensive. You may be used to buying Chinese stuff that does not last or give the performance of a real product, but here we are talking about a very powerful and quality battery that should not explode or catch fire! In the world of hobbies there are indeed $ 30 3s lipo batteries that perform well, but generally they inflate quickly, catch fire! I even have an acquaintance, his garage caught fire because of this kind of shitty battery.
Very expensive battery. Exactly what makes this so expensive??. .By the way, just add another couple of hundred dollars more to the Pint price and you get yourself an XR.
Cause you did not take the time to order the cells and make your own battery.
@J d Bro why you mad it’s a great product. If you can put together something then offer if super cheap why don’t you do it
@@RemingtonTerritory I am one with onewheel, onewheel is one with me. I am calm. I am too busy riding, no time to put something together. I will buy the battery when my one pint battery is degraded. I think it is a better deal than getting a new one from Onewheel.
@@Jd-zd6bh absolutely better to get a new battery, their pint battery upgrade gives xr range. :)
I was totally misled by this. You make it seem very simple when it is not. The security drillbit can not be bought at any traditional stores. I have gone to 3 different ones today that all did not have them. You should stress this more rather than mislead everyone. Now my board is in pieces and I have to wait a week for them to ship to me. Kind of ridiculous.
What bit did you end up ordering. Im in the same situation. Crazy that noone mentions that you need this specialized bit.
@@tlcraig22 www.amazon.com/gp/product/B07TN64T87/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
these bits worked great for me after 2 faulty bits i tried.
You actually disassembled the board without having the necessary equipment at first? Did you not watch the entire video before the installation? Don't jump the gun and next time do some more third party research before your tear apart your $1k+ toy.
What a loser.
4:02 grab 20 IPR Bit
What battery are you using