The camera is sick! Must be one of those 360 cams? You should upload more like this man! Im finishing up my structural welding certificate rn. Looking to get into ironworking right after 👌
@@NistaDGB not these specifically, most beams use TC bolts, they are tightened until the tip of the bolt breaks at a certain tension. I’ve heard basically it tightens the steel together so tight it’s almost like it’s welded. But usually the ones that get welded are connected to the columns, those are usually full pins
I don't mean to nit-pick. This is just some friendly advise but try flipping your wrench over. It looked like you pinched your finger a little bit in the beginning and that's because your holding your spud upside down.
@@mayneofsteel you aren’t doin anything right. go to local 75. Talk to Manny or Jason. Stay away fr them ratty ass outfits. Shit won’t benefit you in the long run
Things sure have changed huh? Watched it changed and was kicking and screaming the whole way until I had to make that first phone call to the immediate family upon death from fall, happened to be my own dad. Back then you had to prove your salt, fuck that, be safe and work smart
Sorry to hear about that man, that’s terrible. And yeah things really have changed. Part of me wishes I had the chance to experience ironworking back in the day but I am thankful for safety, it saved my brother and my own life a couple times. Appreciate the view and the comment, stay safe ✊🏾
@@mayneofsteel Stop waiting man. I did the same thing and regretted it. Call your local, tell them you want a better life, and you’ll never look back. There’s a reason why us union guys are so adamant about this shit, multiple reasons. 🤙
I'm not an ironworker, but I play one in the comments. Seriously, though, I can tell by your comments that you are a union guy. God Bless and if unions aren't here for us, then we are fucked.
What the actual fuck? Im a 13 year connector and everything about this is all wrong, starting with using a lull, and using a shackle to choke instead of the choker itself, shit must take a year to do one Walgreens LOL, and using an impact instead of the spud that's right there?? Ok do your thing I guess
What’s even sadder is you don’t have enough brains to figure out that this video doesn’t represent me as an ironworker or a connector. All you guys talking are the same, dumb. You don’t know what was being done that day, you don’t know anything other than the video and that’s all your small brain can focus on lol
Dam why all the hate? Everyone gets their money as they see fit. If it ain't hurting y'all, why care if he's Union or not? Y'all ain't making money hating 😂 clowns
The problem is that things happen like in Florida when unskilled undertrained numbsculls do things that get people killed...and think they on par with those of us who were trained to do things safely quickly and under budget!
People died for the right to unionize; your standard of living would not be what it is today without unions. You think that employers provide good wages and benefits out of the goodness of their hearts?
He must be new or non union , there’s no way a union Iw connects like that , be gone right after the piece is up , not talkin shit just sayin you need a lot more work bub
@@polishman4168 yes my company is non union, that being said a lot of my coworkers aren’t as experienced. I don’t connect for speed all the time, there’s a lot more I think about, like others when working. Subscribe to the Chanel though, you’ll see the transition to Union.
A good connector will always be a good connector regardless if he’s union or not, to me this guy’s got a long way before he can call himself connector, he used his spud for the first bolt then fucked his partner by snugging the bolts before his partner even had one in yet.. 😂. Not saying I’m the greatest of all but I can outwork some of y’all union mofos on a Monday morning hungover af.
That’s some of the god damn stupidest connecting I’ve ever seen. Tight bolt connectors sit at the hall. Who fucks their partner that bad. 😂. Who the fuck wears knee pads and carries an impact.
@@mayneofsteel yall took 5 minutes to connect one beam... get up and walk that shit scared ass. Go to punk school show that slow ass how to really connect. Smh
3 years ago non union, about a year into ironwork. Currently 6 more months till I turn out with local 75. Lots of improvement since then. Shoutout your grandma tho she taught me a thing or two😉
I also used to Connect in the 90's, for Herrick and always had a bolt ready before the piece got there.
The only way
Exactly. Would have gotten an ear full if that bolt wasn't ready and you weren't already out on the Iron
And why wat was the point of the shackle , you unchoked it anyway , shackles are 20 ft + chokers
Never seen a connector tote a impact????
Me either
Better to be safe then sorry
Ever drop an impact or bolts?
...brand name/source for your knee pads?
Thx
www.amazon.com/LIFT-Safety-Apex-Guard-Black/dp/B006JBI2AY/ref=asc_df_B006JBI2AY/?tag=hyprod-20&linkCode=df0&hvadid=309760615398&hvpos=&hvnetw=g&hvrand=9389140954241014937&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9030341&hvtargid=pla-450269202923&psc=1
Very good
The camera is sick! Must be one of those 360 cams? You should upload more like this man! Im finishing up my structural welding certificate rn. Looking to get into ironworking right after 👌
Trabalho de qualidade homem do bem Deus abençoe a todos dia sua vida
brill, well done you. Looks like a great job and fantastic to see how this is done slightly more safely these days
With all the negative comments on this video haha I really appreciate it brother ✊🏾
Yh haft to be tied of 100% now lmaoo
Do these get welded after being bolted in? Just wondering I know nothing
@@NistaDGB not these specifically, most beams use TC bolts, they are tightened until the tip of the bolt breaks at a certain tension. I’ve heard basically it tightens the steel together so tight it’s almost like it’s welded. But usually the ones that get welded are connected to the columns, those are usually full pins
Killin it
I used to hang iron in AZ early 90s. Chaz from England
Currently watching this upside down 🤙
I don't mean to nit-pick. This is just some friendly advise but try flipping your wrench over. It looked like you pinched your finger a little bit in the beginning and that's because your holding your spud upside down.
Awesome, more yours working videos 👍🙂💪
This some ratty ass $17 an hr connectors 🤣
Damn someone's a hater... guess I'm doin something right
@@mayneofsteel you aren’t doin anything right. go to local 75. Talk to Manny or Jason. Stay away fr them ratty ass outfits. Shit won’t benefit you in the long run
@@aREALbadass1 I’m 75 brother! Hang and bang, onto the next one! I should carry an impact too lmao
Correct!, i thought the same thing. The connectors didn't know what they were doing either.
@@aREALbadass1 I got offer a non union ironworking job, should I even bother?
Who’s harness are you using?
Wym? Brand? It’s the harness the company gave me, guardian I believe
they have impact gun now never seen this before
2 or 3 flats?
😂😂😂piccolo monolocale a 450 MT. d'altezza🤣🤣🤣
Why isn't steel in the states blasted and painted before its erected
I'd be to embarrassed to film this or let anyone see my face to lol 😆 😂 😅 🙃 🤣 zoom boom connector hahahahaha
Things sure have changed huh? Watched it changed and was kicking and screaming the whole way until I had to make that first phone call to the immediate family upon death from fall, happened to be my own dad. Back then you had to prove your salt, fuck that, be safe and work smart
Sorry to hear about that man, that’s terrible. And yeah things really have changed. Part of me wishes I had the chance to experience ironworking back in the day but I am thankful for safety, it saved my brother and my own life a couple times. Appreciate the view and the comment, stay safe ✊🏾
Damn!! I thought you steelies meant to walk with each other??!! Puns intentional
Lol REAL CONNECTORS will laugh they ass off after watching this! But at the end of the day get yo money be safe!
You sound so annoying bro lol
@@mayneofsteel you're a joke.
@@mayneofsteel we understand why you suck even if you don’t
Just keep on keeping on
@@TheOfficialMelendez damn someone’s upset lol
Why not join a union?? Cause of the 30 dollars we pay a month for due or the 100 dollar an hour total pay?
Neither bro, trust me I’m not dumb. Ain’t about the money for me.
It's always about the money bro
Wtf is with the impact
Dude put that spud back into the scabbard every time
Iykyk🤷🏽♂️
Union or non this is just sad! I wouldn't show this too my Grammy.
To*
Why on earth would you impact one side befor me the other side is made🤦♂️🤦♂️🤦♂️
well he’s hustlin…
Nightmare fixing steel work with a telehandler and why didn't you just fix the steel in the cherrypicker? (MEWP)
There is no way you guys are union but keep up the work be safe I'm an ironworker as well
Damn I really gotta figure out who’s saying I’m union.
Nothing better then being union
Join the ironworkers union man. You’ll be so thankful you did.
@@therealweber8119 im going to, just not yet.
@@mayneofsteel Stop waiting man. I did the same thing and regretted it. Call your local, tell them you want a better life, and you’ll never look back. There’s a reason why us union guys are so adamant about this shit, multiple reasons. 🤙
Connectors have the brim forward.
Ironworkers have it backward🤷🏽♂️
@@mayneofsteel Exactly my point stay Hooking on.
@@jacksonboe9120 you must be some badass connector huh 😂
@@mayneofsteel I’m garbage 🗑
@@jacksonboe9120 that’s okay you’ll be alright
NICE
Some of the most joe shit I've seen lol
Dig the knee pads looking like a true carpenter
Lmao someones hating
Impact..... No
Shackle on choker........ No
Forlift as opposed to crane ...... Bio
Proper tag line...... Nope
I know you a softy lol
I'm not an ironworker, but I play one in the comments. Seriously, though, I can tell by your comments that you are a union guy. God Bless and if unions aren't here for us, then we are fucked.
I luv iron work
Youshould get that tatted bro
Guys tools are laying around. Not in their scabbard.
You should invest in a bullpin and a toolbelt
I have both. A bullpin wouldn’t have made this connection any quicker.
It was a lot , easier connecting in the the old Days , Mohawk Indian,Dave
Your partner should wait till one end is done
That’s how you do it?
Not necessarily
What the actual fuck? Im a 13 year connector and everything about this is all wrong, starting with using a lull, and using a shackle to choke instead of the choker itself, shit must take a year to do one Walgreens LOL, and using an impact instead of the spud that's right there?? Ok do your thing I guess
That’s a nice connecting bucket in his wheelchair 😂
Lol Good one? 🤨
Ratty as it gets right here! 🐀 Ever heard of OSHA?
Duh dumbass
Must be non union
Lol zoom boom crane cheapo outfit
Bro I know hahaha glad I left
The saddest part of all of this is the fact that you don't have enough experience to realize how embarrassing this video should be.
What’s even sadder is you don’t have enough brains to figure out that this video doesn’t represent me as an ironworker or a connector. All you guys talking are the same, dumb. You don’t know what was being done that day, you don’t know anything other than the video and that’s all your small brain can focus on lol
Dam why all the hate? Everyone gets their money as they see fit. If it ain't hurting y'all, why care if he's Union or not? Y'all ain't making money hating 😂 clowns
The problem is that things happen like in Florida when unskilled undertrained numbsculls do things that get people killed...and think they on par with those of us who were trained to do things safely quickly and under budget!
People died for the right to unionize; your standard of living would not be what it is today without unions. You think that employers provide good wages and benefits out of the goodness of their hearts?
He must be new or non union , there’s no way a union Iw connects like that , be gone right after the piece is up , not talkin shit just sayin you need a lot more work bub
There’s a lot you guys on UA-cam don’t know and just can’t see tbh. Appreciate you watching though!
@@mayneofsteel please inform us the reasons , I enjoy watching Im just wondering why it took so long connecting 1 beam ?
@@polishman4168 yes my company is non union, that being said a lot of my coworkers aren’t as experienced. I don’t connect for speed all the time, there’s a lot more I think about, like others when working. Subscribe to the Chanel though, you’ll see the transition to Union.
A good connector will always be a good connector regardless if he’s union or not, to me this guy’s got a long way before he can call himself connector, he used his spud for the first bolt then fucked his partner by snugging the bolts before his partner even had one in yet.. 😂. Not saying I’m the greatest of all but I can outwork some of y’all union mofos on a Monday morning hungover af.
@@IvanHernandez-np4se you right, you ain’t even close to the greatest 👊🏾
This video is ruining our trade
Another softie I see
Why cuz he makes it look easy?
That's just sad 433
I’ll see you soon bro
Very
Rats 🐀 🧀
I've seen girls do this.
Ok? Congrats lol
Thanks for the views sister
That’s some of the god damn stupidest connecting I’ve ever seen. Tight bolt connectors sit at the hall. Who fucks their partner that bad. 😂. Who the fuck wears knee pads and carries an impact.
If you know you know and you obviously don’t 🤷🏽♂️
Yall slow af
Lmao coming from a nobody
@@mayneofsteel yall took 5 minutes to connect one beam... get up and walk that shit scared ass. Go to punk school show that slow ass how to really connect. Smh
@@andeeebeenholdin5989 you sound so annoying bro lol
@@andeeebeenholdin5989 worse than the ground guys lmao
@@mayneofsteel ground guys?? Just stay home. You embarrass yourself.
First period rookie punk? Clearly not ready. Tie off on wrong side of piece for the next one. Wow, my grandma could connect better. Geez
3 years ago non union, about a year into ironwork. Currently 6 more months till I turn out with local 75. Lots of improvement since then. Shoutout your grandma tho she taught me a thing or two😉
Goes to show what rockys.green horns not raising gang specialest connectors they aren't. But v iron workers trying to connect
Bro that took a while next time hurry your ass up