this was very helpful. Im a girl in the wonderful world of hair and i took apart my clippers yesterday. And let me tell you with this video was the best in explaining the proper way. THANK YOU!!
After days of searching for instructions on disassembling my clippers I finally found it here. I have Oster 2 speed Turbos that I need to replace the housing due to the fact that the lever post is loose & the only way to fix it is to change out the housing. I was a little afraid to take it apart but after seeing this video I can see that it's quite simple.Thanks for the video.
wanted to thank you for posting this video..was able to disassenble my Oster Classic 76 clippers and make the repair myself using your video..the small nut that holds the switch in place broke,this caused the switch to move around freely in the end cap..after disassembling ,also found a wire that was broken off the switch...thanks again for posting vid.,was a huge help..
Thank you very much for this video, I orderd a new switch for my wifes clippers, ,, well i forgot how the wires went back on.. I was able to pause this when you showed the switch housing, and install the new switch. She is planning on opening her own shop so ill be using this video for future repairs ,, Thanks again.
My old 76 is running crazy slow. Getting a weird electrical burning smell. I’ve taken it apart, cleaned everything replaced brushes. Still the same. Is the armature or the field assembly more likely the issue? Or replace both?
I am so pleased . Now I know what to do!!!and to save a bunch of money...Just one thing...the little ring that screws onto the toggle switch - mine cracked. Is there any where that can replace it?? Or can I use the machine without worry...without this ring??
Awesome video, thank you for getting in depth with the c76. If there is something wrong with the motor, would you then send it out for service, or would oster ship a new one? Thanks again!
Help! I removed my end caps and one of the pieces of charcoal (I think it's charcoal) broke off and is now lodged inside. How can I get this out? I have not removed the electric end and removed anything as I did not have the right kind of screw driver. Would this help me get to it? I'm not sure if I can chip at the charcoal. Will this cause damage to what's underneath? Thanks so much for your help.
What's that little button just below the '76' for and how do you know exactly when it needs to be greased. I opened mine today to clean out the hairs and noticed there's a fair amount if grease still in there.
Dear Sir. Good to find your good effort movie. How are you? Please may I take a moment of your time to say thank you. Because I gave my hearing under the plate a clean and re grease I noticed a small washer came out with the gears. If I look close I can see the small washer was left inside your gearing port flush the the body of the clipper. Am I right? I'm greatful. I look forward to your reply if you could. Thanks. From Craig Lee.
This video is GREAT. I got everything apart, even bought some retaining pliers...now I'm trying to put it all back together again...however; I CANNOT get that retaining ring back in...how in the world do you do that! Anxiously awaiting a reply, by dog really needs to be clipped for the summer;-)
Hi there. I recently pickt up a vintage oster hair clipper like the 10 model. But the actual older version the model that I have it seems it's from the 50s or 60s and it over heats not sure if it came with a built in fan and the tongue lever is gone. Any help on where to purchase a tongue lever that is that old. Or how to fix the over heat issue that would be grate. Any help Most appreciated
what do you think about the limited edition 76's? The black and silver one, pretty much the same thing but a different color and price right? i know its a dumb q
Question: I have an Oster 76 and the assembly that holds the blade pulls completely out it has two screws that hold it in place at the top of the clipper. The scews pull out with the brass things that hold them in place. Do I need a new housing? b/c I think the brass things came as part of the housing I can't find a part number and they're not on the diagram just the screws.
8:11 nooop!...dont have that tool the retainer pliers so i cant do this....shit pommes frites(Swedish)i need to find a good translation and buy it in the ABBA -Country.
First PUT a hose clamp on outside of housing and very seldom will you break one when snap ring snaps back. Snap ring is strong enough to hold a rear axle in a 1 ton truck. Heat the Housing slightly with a hair dryer and field and brush carrier will fall right out with easy. skip
Wow. Wish I'd read this before. That retainer Spring is a right bastard to get out and the force of it split the housing in two!!!! I learned the hard way
Take them apart slide the blade there a small piece of rubber dont lose that loosen screws 1st the blade will slide right out vlean and oil well there pulling cause tneres dry hair in the blades must take apart to clean well
damn dude i was changing the carbon thingies and it broke inside both sides...i cant get those things out its pissing me off ...plz help before i break these clippers into a million pieces
How often do you have to do this to clean it up? I'm thinking of purchasing a 76, but I'm not looking forward to doing this a lot. I cut my hair every 2 weeks.
Did found one of this tools to take out the ring.But it turns out that it was to small to "grip" the two holes(8:03).The problem with this🤡 is that he dont tell or give us enough information about this tool ,why???He dont even put it back together again!!!..wonder why?
Huge chunk of burgundy case Broke Off when using the retainer pliers because the ring is STEEL and slipped from being squeezed to back open!!! Motor did not slide out but all wires shredded and motor was in pieces when I used pliers to pull it out. I totally ruined clippers out $175 :(( Attempt this at your own risk...so sad I did...
I want to buy a really good beard trimmer. By good I mean a trimmer that cuts my beard really even. Like the ones of hq gadgets they have at the hairdresser. I live in sweden so take that into account when I am going to buy it. anyone knows? Best regards
Yes, you are not a pro. You can't be taking stuff apart and then not showing how to get it back together. There's nothing wrong with the armature, just take the black off with a buffer or electronics cleaner. A dremel with a buff also works. The 76 and A5 and the 97 (50 cycle 220V in UK) are the first clippers anyone learns on. Please don't do any more "repair" videos where you leave parts strewn all over the desktop.
this was very helpful. Im a girl in the wonderful world of hair and i took apart my clippers yesterday. And let me tell you with this video was the best in explaining the proper way. THANK YOU!!
!wtfw$51( j😅a a
After days of searching for instructions on disassembling my clippers I finally found it here. I have Oster 2 speed Turbos that I need to replace the housing due to the fact that the lever post is loose & the only way to fix it is to change out the housing. I was a little afraid to take it apart but after seeing this video I can see that it's quite simple.Thanks for the video.
wanted to thank you for posting this video..was able to disassenble my Oster Classic 76 clippers and make the repair myself using your video..the small nut that holds the switch in place broke,this caused the switch to move around freely in the end cap..after disassembling ,also found a wire that was broken off the switch...thanks again for posting vid.,was a huge help..
Awesome vid. Speed was perfect your voice was clear and so were the frames. Thanks dude. Keep a tubing.
Thank you very much for this video, I orderd a new switch for my wifes clippers, ,, well i forgot how the wires went back on.. I was able to pause this when you showed the switch housing, and install the new switch. She is planning on opening her own shop so ill be using this video for future repairs ,, Thanks again.
Thanks bro a peace of carbon broke and was stuck inside the hole and with your video I was able to fix it myself thanks
Can you do a video on showing how to properly clean all these components and grease it? Thanks for this disassemble video!
best video so far considering it shows where the washer goes in the bottom opposed to other videos
Thank you for a very through video, just what I needed to service my 76.
My old 76 is running crazy slow. Getting a weird electrical burning smell. I’ve taken it apart, cleaned everything replaced brushes. Still the same. Is the armature or the field assembly more likely the issue? Or replace both?
im getting mine in a c ouple of weeks... but i held a friend's that thing is crazy as hell when u turn it on... got a real motor on that thing!
@megarepsol well i basiclly just put the spring over the broken brush and it worked fine..i guess i have to wait until the lil bit left is warn away.
Hey Darwin, thanks alot for these helpful tips. I just now got my 76's running after like 10yrs. of no use 👍🏼
I am so pleased . Now I know what to do!!!and to save a bunch of money...Just one thing...the little ring that screws onto the toggle switch - mine cracked. Is there any where that can replace it?? Or can I use the machine without worry...without this ring??
Awesome video, thank you for getting in depth with the c76. If there is something wrong with the motor, would you then send it out for service, or would oster ship a new one? Thanks again!
@romito40 Snap ring pliers. you can buy them at any auto parts store since snap rings are common in car repair.
Help! I removed my end caps and one of the pieces of charcoal (I think it's charcoal) broke off and is now lodged inside. How can I get this out? I have not removed the electric end and removed anything as I did not have the right kind of screw driver. Would this help me get to it? I'm not sure if I can chip at the charcoal. Will this cause damage to what's underneath? Thanks so much for your help.
i need urgent to hepl. I did all the steps correctly but now didn`t work. I missed those things somewhere contact 2:05 . please help me
Very good. Thank you.
What's that little button just below the '76' for and how do you know exactly when it needs to be greased. I opened mine today to clean out the hairs and noticed there's a fair amount if grease still in there.
where do you apply grease?
I did this with the clippers plugged to the wall and my house exploded.
Dear Sir. Good to find your good effort movie.
How are you?
Please may I take a moment of your time to say thank you.
Because I gave my hearing under the plate a clean and re grease I noticed a small washer came out with the gears. If I look close I can see the small washer was left inside your gearing port flush the the body of the clipper. Am I right?
I'm greatful. I look forward to your reply if you could. Thanks.
From Craig Lee.
Thank you for a very through video!!!!
Can you show how to open up the fast feeds to clean them? I just recently got them (few days ago)
Thank you sir this helped 👌
This video is GREAT. I got everything apart, even bought some retaining pliers...now I'm trying to put it all back together again...however; I CANNOT get that retaining ring back in...how in the world do you do that! Anxiously awaiting a reply, by dog really needs to be clipped for the summer;-)
Hi there. I recently pickt up a vintage oster hair clipper like the 10 model. But the actual older version the model that I have it seems it's from the 50s or 60s and it over heats not sure if it came with a built in fan and the tongue lever is gone. Any help on where to purchase a tongue lever that is that old. Or how to fix the over heat issue that would be grate. Any help Most appreciated
Thank you!
what do you think about the limited edition 76's? The black and silver one, pretty much the same thing but a different color and price right? i know its a dumb q
@asweetroubledsoul hey their,did you ever find out the solution to your problem? my switch is also loose and it turns on and off by itself..
if my clippers are making a load noise and had them for 4 years should i by new ones.and my clippers dont have a adjust button.
Question: I have an Oster 76 and the assembly that holds the blade pulls completely out it has two screws that hold it in place at the top of the clipper. The scews pull out with the brass things that hold them in place. Do I need a new housing? b/c I think the brass things came as part of the housing I can't find a part number and they're not on the diagram just the screws.
the switch on my 76 is loose. how do i tighten it? it turns on and off by its self and i know its the switch i just dont know how to tighten it
hey i have a question, my oster 76 blade size 1 got apart is there a way i could put it back together to ensure it trims the same way as before?
What is the name of those needlenose pliers and where can I get a pair
Dangit, I took my clippers apart and when I put the carbon brushes back in, one broke and is stuck in there. Can't get it out....
Sans Souci Studios that just happened to me did you find a fix for it ?
they don't open and close right? so i need to buy blades to do a good fade
He really likes the word "basically".
Jacob Scott "in this case"
How did u learn how to do this
8:11 nooop!...dont have that tool the retainer pliers so i cant do this....shit pommes frites(Swedish)i need to find a good translation and buy it in the ABBA -Country.
Qual e a melhor GTS 888 ou Thrive 888?
First PUT a hose clamp on outside of housing and very seldom will you break one when snap ring snaps back. Snap ring is strong enough to hold a rear axle in a 1 ton truck. Heat the Housing slightly with a hair dryer and field and brush carrier will fall right out with easy.
skip
Wow. Wish I'd read this before. That retainer Spring is a right bastard to get out and the force of it split the housing in two!!!! I learned the hard way
i did everything u did in the video and put the clippers back together and now there not turning on
NathanCabezas check ur carbon brush area. when they are out or not in correctly the unit will not turn on.
Oops I don't mead end camps. I mean the 2 round caps that can be removed with a coin. I missed the name. Thanks again.
How do you level out the blades? Mines are starting to pull hair. If someone can help me I'd really appreciate it
Take them apart slide the blade there a small piece of rubber dont lose that loosen screws 1st the blade will slide right out vlean and oil well there pulling cause tneres dry hair in the blades must take apart to clean well
damn dude i was changing the carbon thingies and it broke inside both sides...i cant get those things out its pissing me off ...plz help before i break these clippers into a million pieces
Thank u sooo much!
How often do you have to do this to clean it up? I'm thinking of purchasing a 76, but I'm not looking forward to doing this a lot. I cut my hair every 2 weeks.
Thanku ya video helped alot do more
maybe somebody knows whats the problem with my 76 it dont turn on only if i hold it in a certain angle.
Have the power cord replaced. There's a short in the wiring.
SI SABES ESPAÑOL TE DIGO QUE EXPLICAS EXCELENTE QUE DIOS TE BENDIGA
Did found one of this tools to take out the ring.But it turns out that it was to small to "grip" the two holes(8:03).The problem with this🤡 is that he dont tell or give us enough information about this tool ,why???He dont even put it back together again!!!..wonder why?
Huge chunk of burgundy case Broke Off when using the retainer pliers because the ring is STEEL and slipped from being squeezed to back open!!! Motor did not slide out but all wires shredded and motor was in pieces when I used pliers to pull it out. I totally ruined clippers out $175 :(( Attempt this at your own risk...so sad I did...
Sounds like you’re not the right person to work on these.. I’ve taken mine apart and put it back together half a dozen times with no issue.
@@christopherjames5192 good for you
I'm glad you told to unplug, cause stupid people do exist, I'm sorry.
I want to buy a really good beard trimmer. By good I mean a trimmer that cuts my beard really even. Like the ones of hq gadgets they have at the hairdresser. I live in sweden so take that into account when I am going to buy it.
anyone knows?
Best regards
i got sa same clipperz
Video keeps cutting out
that's one weird ass milkshake blender...
@edabarber1 re grease and oil them
هل يوجد ترجمه الى العربي
wow am like🐇🎈💞
awsome vid but im jus gonna buy new ones
did you say good morning? lol
gross the fast feed model is much easier to keep sanitary
Yes, you are not a pro. You can't be taking stuff apart and then not showing how to get it back together. There's nothing wrong with the armature, just take the black off with a buffer or electronics cleaner. A dremel with a buff also works. The 76 and A5 and the 97 (50 cycle 220V in UK) are the first clippers anyone learns on. Please don't do any more "repair" videos where you leave parts strewn all over the desktop.
ArtVanAuggie aww shut ahp
sexy