Thank you for this!! I bought mine used, and it started acting funny and heating more than it had previously. It wasn’t clogged with fur but it did need oiling, and now it’s good as new! 🎉
I have a golden A5 single speed to groom my dog. Motor runs fine, blades reciprocate like normal but about 10 seconds after I start grooming, blades stop cutting. Motor still running and blades still moving but won’t cut and the blades are new…. I’ve cleaned and lubed but nothing helps.
Hello. A lot of customers get new blades sharpened out of the package bc they are not very sharp or sometimes even dull. Also you might need to clean the animal you are cutting bc dirt will dull the blade immediately. Oil all the time to prevent dirt grinding in the blade also. It could be also that you are not latching the blade all the way down and it is lift up a little and it stops moving or cutting.
How do you remove the oiler/oil port on this or the Oster 76? I broke off a tiny metal stem oiling it and it fell in. 😮😮 I know I can buy the part but don’t know how to remove it. Thanks in advance.
The only time the oilers should be messed with is when the case is broken because you'll probably have to break it to get it out. . I don't know how to get it out without breaking the case from the vent. But I only do that if the case needs to be replaced. If the case is not broken I would just not worry about it
@@cloudsdiamondsharpening3973 update: I used the single jaw of a small needle nosed pliers and was able to easily twist it off. I bought a new oiler for under $4, removed broken metal piece, and installed the replacement. Thanks love your channel, BTW.
Hello. Sorry for the late reply but a new clipper shouldn't need to be broken in. I recommend sending it back for warranty through a warrenty service company for oster.
mi maquina es Ester antigua muy buena pero 1 no tiene guarda pelo 2 tiene dos patas anchas en el porta cuchillas y se me dificulta poner las cuchillas quisiera un modo Praticó de colocarlos .y de q se puede hacer el guarda pelo? siempre se llena de pelo el motor y limpiarla no es fácil. gracias
Cloud's Diamond Sharpening sounds good... Do you happen to have carbon brushes for the vintage progienic 111?? If so, maybe I can send mine in to you for maintenance?? My Father In Law gave me his and I'm not sure of the overall condition but I'm sure they need tuned up
Ace OfFades I know but they don't manufacture them any more but I keep old good brushes and I'll match them up or find a universal pair. If you looking for new ones just to buy, you'll have to call around and see if anyone has a back stock of them.
Thank you for this!! I bought mine used, and it started acting funny and heating more than it had previously. It wasn’t clogged with fur but it did need oiling, and now it’s good as new! 🎉
I have a golden A5 single speed to groom my dog. Motor runs fine, blades reciprocate like normal but about 10 seconds after I start grooming, blades stop cutting. Motor still running and blades still moving but won’t cut and the blades are new…. I’ve cleaned and lubed but nothing helps.
Hello. A lot of customers get new blades sharpened out of the package bc they are not very sharp or sometimes even dull. Also you might need to clean the animal you are cutting bc dirt will dull the blade immediately. Oil all the time to prevent dirt grinding in the blade also. It could be also that you are not latching the blade all the way down and it is lift up a little and it stops moving or cutting.
Thank you for that. It was exactly what I was looking for. Although now I'm not sure if I feel , more or less intimidated taking this on. 🤔
Hello. Np. Glad it was what your were looking for. It can be tough at times. Good luck! If you feel unsure, I do it all day lol 😉 Have a great day
Its really good video how many wats does it have pls?
Mine started smoking 1st use, in process of return to Oster right now.
Hello, sorry to hear that. It must be defective, if it is under warranty they will re place it
How do you remove the oiler/oil port on this or the Oster 76? I broke off a tiny metal stem oiling it and it fell in. 😮😮 I know I can buy the part but don’t know how to remove it. Thanks in advance.
The only time the oilers should be messed with is when the case is broken because you'll probably have to break it to get it out. . I don't know how to get it out without breaking the case from the vent. But I only do that if the case needs to be replaced. If the case is not broken I would just not worry about it
@@cloudsdiamondsharpening3973 update: I used the single jaw of a small needle nosed pliers and was able to easily twist it off. I bought a new oiler for under $4, removed broken metal piece, and installed the replacement. Thanks love your channel, BTW.
How long does it take to break in a new at clipper?..mine is a lil slow out of box...2 speed.....never tapped housing to loosen motor
Hello. Sorry for the late reply but a new clipper shouldn't need to be broken in. I recommend sending it back for warranty through a warrenty service company for oster.
mi maquina es Ester antigua muy buena pero 1 no tiene guarda pelo 2 tiene dos patas anchas en el porta cuchillas y se me dificulta poner las cuchillas quisiera un modo Praticó de colocarlos .y de q se puede hacer el guarda pelo? siempre se llena de pelo el motor y limpiarla no es fácil. gracias
Awesome video!!!!
Do you have a video or can you make a video for the Vintage Progienic Model 111 ??
Ace OfFades hello np. no I'm sorry. I'll make one if I get one in. Thanks for watching.
Cloud's Diamond Sharpening sounds good...
Do you happen to have carbon brushes for the vintage progienic 111??
If so, maybe I can send mine in to you for maintenance?? My Father In Law gave me his and I'm not sure of the overall condition but I'm sure they need tuned up
Yes I will have brushes for it. I just don't know what ones they are until I see the old ones. They made a model 10 and 111 at the same time period.
Cloud's Diamond Sharpening mine are model 111
Ace OfFades I know but they don't manufacture them any more but I keep old good brushes and I'll match them up or find a universal pair. If you looking for new ones just to buy, you'll have to call around and see if anyone has a back stock of them.
Very good video.!!! Do you have any video like Oster's A6 confort or Slim maintences,please.?!?! I'm learning so much with yours videos. TKS.!
Mironides Grego thank you. I'm glad you enjoy. No a6 videos sorry.
What kind of oil do you use???
Oster clipper blade oil
do you have this video without the music? very difficult to pick out what you are saying between clipper noise, music, and your quiet voice.
Máy kêu quá ban nên kiêm trả lai cốt co mon khong kiêm tra cổ góp than co đều không nói chúng cach bạn làm chưa đat.
background music contributes nothing to the video. please leave it out of these kinds of videos
Thanks for watching!