SolidWorks How to use Lofted Boss/Bass -Absolute Beginners
Вставка
- Опубліковано 6 сер 2024
- Watch my 1-Hour free course ► bit.ly/SCPFreeWebinar
After that, you can consider checking out my ultimate SolidWorks Course.
How to Loft in SolidWorks for beginners. This is an ultimate loft tutorial for SolidWorks beginners who have not worked with this feature of SolidWorks before and a full introduction to the whole concept of lofting. In this tutorial, you will learn how to work with profiles, guide curves, how to connect them as well as "End constraints". The pace of this video is set for absolute beginners but as an intermediate, you can skip to 01:23.
Prerequisite: How to create new planes tutorials► • SolidWorks Tutorials ...
Hi, my name is Ryan and I am the owner of SolidWorksTutorials, this very channel you are on! You're welcome. SolidWorks is my passion and I love to teach it to people who love to learn it.
Also, if you like to practice more, make sure to sign up to my website where I put weekly premium tutorials for beginners.
Website: solidworkstutorials.net
Membership: solidworkstutorials.net/plans...
Tutorials: solidworkstutorials.net/produ...
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketch
- SolidWorks Surface
- SolidWorks Motion
- SolidWorks Weldments
- SolidWorks Mold Design
I have a great webinar that is free and you can watch it here bit.ly/SolidWorksCourseProForBeginners
I like it. Your way of teaching is very clear and slow enough to follow and helps point out easy mistakes that I can avoid.
I have watched about 3 dozen tutorials, and yours, my friend, are a cut above!!! Definitely way better the more advanced you get. Your extra detail to teach for speed and userabilty is superior.
Keep em goin'!!!
glad you like my videos
@@with-Aryan feel free to use my comment as a testimonial too!
@@dbturbonub2536 would mean a lot if you could post it here www.trustpilot.com/review/solidworkstutorials.net
Your teaching method is great. I like it.
Thank you very much Zohreh
good work, great explanations.
This video was great! Super helpful. I get to learn a lot the more I watch your videos. Really good!!
glad to hear that. Checkout my c course if you are serious about learning SW
Struggled with lofting the guided lines but after struggling for more than an hour figured it out Alhamdullilah...phewwww!
good
Amazing way of teaching! Thank you!
you are very welcome and thank you for your feedback. These feedback such yours were the reason I got motivated to make my course on solidworks. thank you
Excellent tutorial! Very useful content shared in a streamlined presentation!
Glad you enjoyed it!
Thank You very much! I had learned so much!🤗🤗🤗
Thank you very much, Aryan! I really loved your tutorial and got a lot out of it!
You are welcome Ed! Make sure to check my course too, you're gonna love that bit.ly/SolidWorksCourseProForBeginners
That is the great way of teaching👍
keep working u really helped me thanks a lot
Awesome
Good job! Keep you way of teaching :)
thank you,lezzat bakhshe didane amuzeshat
This was great!
glad you liked it
Very good, thank you so much
Thank you too!
Thank you. Very helpful!
you're welcome!
Magnificent ...class i never seen like your way of teaching..loved a lot sir thank you soo much i wish you all the success to you...
dont forget to subscribe ;)
Yes i did subcribed
Great tutorial. I have a SW test tomorrow and this was helpful for a quick revision, thx!
you are very welcome. CSWA?
@@with-Aryan Not yet, I'm only learning SW since early february. Thx for asking.
If you're curious, this is my current level
ua-cam.com/video/mVZXFARJPkI/v-deo.html
Nice!!!
Thanks!
It's a wonderful tutorial. Can you make a video of the blockage of the curved bifurcated vessel?
what is that?
Its an occluded artery
thanks chacho 😍😍😍
You’re welcome
Oh my goodness, there's such a huge difference in presentation between this and the video on lofts from 8 years ago.
Right?
Nice
good - to the point - nice length and well planned - you could have added different end constraints to the remaining shapes 4,5,6 etc.. A question for you - could you have added guide curves in the plan view too?
what do you mean?
Can you please create a video for the “curve” feature and why would one use that instead of making that original curve?
feel free to check my 30 minutes free webinar if you want to learn a few rare tips you won't find on UA-cam ► courses.solidworkstutorials.net/Webinar-Registration
you have a good way of teaching
Woah !!! I really like your tutorials on SW. I am just a beginner but man do I like your videos. I just have one suggestion: why don't you collate all your SW videos from beginner to advanced. That way it would really be one of the best courses of SW on YT hands down. Your subs from India.
welcome and enjoy
sir i have a question when i draw guide curve by inserting a new at throws an error showing its not intersecting with the section
I don't follow
Does Plane 6 need to be on the outer edge of the sketches? What do you do if your profiles are offset (i.e. not exactly centered)?
BoostElectronics no it does not. In that case you must draw a new profile
I have a question, what can be a reason that loft does not work? My Loft doesn't look like o solid, its still transparent. T.T
TONS of reasons. this cannot be answered like this. Give me more details
Thank, you, please How do you copy sketch guides lines from Plane 6 to Plane 8 ?
which time mark?
@@with-Aryan 8::06, thx.
@@santory5788 look to the left side hhe did it ones and show you just playing with design tree
if you want it you just pick the plane you just draw it and then pick the last point of your related sketch and create a plane after that just open new sketch on your new plane and click the sketch you want to copy and use the convert entitities on sketch tab its done
All your tutorials are superb. However the “How to create new planes” I don’t really get it. Pls can you make an update (new) video about creating new planes.
Sure!
Can u suggest me a book or pdf to learn solidworks ?
I do have a 2100 page PDF tutorial to make a tiger tank in SW but it is not free Mohammed. Although I am working on a course which comes out soon if you could wait a month or two
Went to the video on how to add planes, most of the comments were about your "sexy voice" hahahahah
Can you not use 3D sketch, which solidworks automatically creates planes, instead of creating planes and sketches on those planes? I'll give it a try and give you guys feedback ;)
Of course, you can use 3D sketches for guide curve specifically. But performing Loft with 3D sketches just for the sake of not making planes, is counter productive and would take you longer
But how do you do the planes like that? I copied everything exactly and it didn't work
Hi watch it here. ua-cam.com/video/XtNggGboCBE/v-deo.html
@@with-Aryan Think you could put that link in the description too? Thanks.
@@cyrex686 sure
😂😂😂 yes chacho i subscribe
Muchacho
@@with-Aryan
thank you #chacho aryan ❤ i get things from you withot money 😂😂😂 sorry chacho
Keep a practise drawing on side of the screen and explain it it will be more comfortable while watching the video.... May be if the peoples need to draw the same profile they need the dimensions of the profile....
Exmaple
Damn! Still over saw that!
Example is not spelled exmaple
my bad
你吓到我了
Guide curves should be called profile curves.
i like 😂😂
if u dont know how to create plan 😂😂
#chacho