One of the glow plug in my Golf 5 was bad, error in VCDS (P0673 - 000 - electrical Fault - Cylinder 3 Glow plug circuit) . But on the dash, there was no error (Yellow Spiral was not on). Without VCDS I would not know it (yes, I could tell by a bit "slow" start at minus degrees, but nothing critical). And yes, the plug harness is shit, plastic broke on all of them. I spent a lot of time gluing it (yes, somebody would rather replace it - still not so easy, you have to cut old and replace it...).
Hello golf Wagen I have an Audi a4 b8 2.0 tdi cr manual, with an intermitent p0087 error, checked the hpfp for particles nothing the cars has stage 2 in ecu any guess what could it be?? the problem happens 1 time in day or 2 days
Měl jsem stejný problém. Lišta k žhavícím svíčkám zkřehlá a nedržela na svících. Vytočil jsem na každé žhavičce závit M4 a starou lištu jsem ustřihnul. Na původní vodiče jsem nakrimpoval vodiče s kabelovým očkem a přišroubil k žhavičce. Starty naprosto bezproblému.
This man has more talent in one hand than an army of mechanics at the VW dealers!
Maltimetaer ko Kitna wolt pe set kiya h
One of the glow plug in my Golf 5 was bad, error in VCDS (P0673 - 000 - electrical Fault - Cylinder 3 Glow plug circuit) . But on the dash, there was no error (Yellow Spiral was not on). Without VCDS I would not know it (yes, I could tell by a bit "slow" start at minus degrees, but nothing critical). And yes, the plug harness is shit, plastic broke on all of them. I spent a lot of time gluing it (yes, somebody would rather replace it - still not so easy, you have to cut old and replace it...).
Hello! What engine oil do you use?
Starts ok
Hello golf Wagen
I have an Audi a4 b8 2.0 tdi cr manual,
with an intermitent p0087 error,
checked the hpfp for particles nothing
the cars has stage 2 in ecu
any guess what could it be??
the problem happens 1 time in day or 2 days
Hi , I drive VW Golf 5 1.4 patrol engine and 80 ps . My RPM goes over 4000 when I am at 140 km in 5th gear . Is it normal?
Thanks.
Měl jsem stejný problém. Lišta k žhavícím svíčkám zkřehlá a nedržela na svících. Vytočil jsem na každé žhavičce závit M4 a starou lištu jsem ustřihnul. Na původní vodiče jsem nakrimpoval vodiče s kabelovým očkem a přišroubil k žhavičce. Starty naprosto bezproblému.
Dobry nápad
Slabá baterka v meráku?
Ináč Všetko dobré do nového roka ti prajem a nepracuj tolko 😉 Nazdravie 🍾🍾🍾🍾
Dakujem aj, tebe vsetko dobre.