Genius. Patient. Nicely done. Saved me from needless steps on fuel line replacement. Exactly what I needed to see with my poor eyesight... the fuel tank holes. Thank you.
Yep. If that doesn’t fix it I would recommend just replacing the carb or rebuilding it. Let me know if you have any questions when you get those lines replaced.
Those jet screws are a bear to adjust on my carb. EPA covers removed- revealed jet screws in a dual pit that I couldn't get a screwdriver on to adjust anything (no slot). Under a magnifying glass the screws look like there are serrated edges around the screw edges- housed inside the protective pit. I cannot get my smallest hemostat in the pit to attempt an adjustment. I almost had it fixed. Knowing Welbro it's probably an obsolete carb.
I have the same one. What are the setting screws left one is what and the right side. I have the same problem with Maine and it fires up and stalls out. I put new lines and filter it was running great and then nexit time it didn't say running? 😊😮
Yeah they are pretty cool. I’m gonna get a carb for mine because that adjustment screw kinda got bent and it needs a rebuild kit anyway. It kinda sucks that you have to replace the line every time it wears down though. Maybe I’ll make a video on putting a speed-feed on it.
@@brycelund4112 nice I'll sub and check it out. Whenever you eventually upload it. I know this one will need a good carb cleaning. It's winter here and I won't be in my shop as much. Business is slow this time of year. Except snowblowers and saws
I got one for $10 in better shape than this one. Looking to tune up, bcus this would b perfect since I hav a bad back. I hav a larger one we call the beast and it works just fine, it’s heavy duty.
Genius. Patient. Nicely done. Saved me from needless steps on fuel line replacement. Exactly what I needed to see with my poor eyesight... the fuel tank holes. Thank you.
I got one just like that with the same problem...Thinking about selling it...Just bout primer and fuel line..havent installed it yet
I just got the same model and was looking for how to fix it. Glad you were there. I’m going to start with the gas lines. Hope that’s all it needs.
Yep. If that doesn’t fix it I would recommend just replacing the carb or rebuilding it. Let me know if you have any questions when you get those lines replaced.
Some of the older weedeater stuff is worth saving. Never seen one of these. Cool!
Those jet screws are a bear to adjust on my carb. EPA covers removed- revealed jet screws in a dual pit that I couldn't get a screwdriver on to adjust anything (no slot). Under a magnifying glass the screws look like there are serrated edges around the screw edges- housed inside the protective pit. I cannot get my smallest hemostat in the pit to attempt an adjustment. I almost had it fixed. Knowing Welbro it's probably an obsolete carb.
Just got one of these. The primer bulb assembly is missing, whole thing. If I find one how does it connect.
Iam going to try to make the hole in the Handel Bigger by the throttle cable for more Air?
I have the same one. What are the setting screws left one is what and the right side. I have the same problem with Maine and it fires up and stalls out. I put new lines and filter it was running great and then nexit time it didn't say running? 😊😮
It’s probably the diaphragms in the carb. And the screws I would start with them about a turn and a half out each and adjust from there.
I just received one if these free.
Been sitting outside for awhile
Where can I get parts for fuel tank like fuel filter, primer bulb etc?
Amazon is the cheapest way.
One cool DUDE
What do you use for fluid in the ultrasonic cleaner?
Gunk carburetor parts cleaner.
Just bought one today for $25 at an estate sale. I will do a video on it as well. Eventually.
Yeah they are pretty cool. I’m gonna get a carb for mine because that adjustment screw kinda got bent and it needs a rebuild kit anyway. It kinda sucks that you have to replace the line every time it wears down though. Maybe I’ll make a video on putting a speed-feed on it.
@@brycelund4112 nice I'll sub and check it out. Whenever you eventually upload it. I know this one will need a good carb cleaning. It's winter here and I won't be in my shop as much. Business is slow this time of year. Except snowblowers and saws
@@JGsgarage_unboxings thanks for subbing. Yeah maybe I’ll get to it this winter when stuff gets slow.
@@brycelund4112 I definitely hear you there. I been doing different videos during winter. I'm running out of content ideas.
I am working on the same weed eater can you tell me is it 2 stroke or 4 stroke
2 stroke.
I luv tat drill
Thanks
I got one for $10 in better shape than this one. Looking to tune up, bcus this would b perfect since I hav a bad back. I hav a larger one we call the beast and it works just fine, it’s heavy duty.